Vante TPE SEALER SYSTEM

This sealing head model seals .125 inch wall thickness tubing . with an outside diameter range of .375 to 1.00 inches. ... 70% maximum relative humidi...

0 downloads 128 Views 654KB Size
Vante®

TPE SEALER SYSTEM

A Machine Solutions Inc. Company

The all-new Vante® 4160-series TPE Tubing Sealer is the obvious choice for the reliable, efficient creation of permanent seals in thermoplastic tubing common in single-use manufacturing procedures performed in biopharmaceutical cleanroom production suites, allowing for ease of separation at the seal area. It operates with voltage rated inputs of 100-120 VAC or 230 VAC. The connection of an external compressed air supply is not required. Offering the ultimate in portability, this tubing sealer can be easily moved throughout the suite. The durable, maintenance-free sealing heads are connected to the controller with an 8ft cable and are equipped with a remote cycle-start feature to make this the only TPE Sealer offered standard with truly remote tube sealing capabilities. The controller is equipped with 2 levels of password protection for quality assurance and process control. A simple, user-friendly control panel allows for accurate configuration and operation. The sealing heads have a built-in safety lock feature to prevent them from being opened once a sealing cycle has been initiated. This all-new Vante TPE Tubing Sealer consists of the Model 4160 Controller and interchangeable sealing heads - Model 4161 Sealing Heads for thin-wall TPE tubing, and Model 4162 Sealing Heads for thick-wall TPE tubing up to 1-inch outside diameter.

Controller Model 4160

Features:

Thin-Wall Sealing Head Model 4161

· Password protected settings · Standard remote sealing heads with safety lock and cycle start button · Increased tubing O.D. capability to 1”

This sealing head model seals .062 & .094 inch wall thickness tubing with an outside diameter range of .250 to .688 inches.

Thick-Wall Sealing Head Model 4162 This sealing head model seals .125 inch wall thickness tubing with an outside diameter range of .375 to 1.00 inches.

Benefits: · · · · · ·

No external compressed air required Truly remote sealing capability Settings are easily adjusted and locked Ease of operation Very low maintenance Easy to clean

BIOPHARMACEUTICAL

Vante®

TPE SEALER SYSTEM

MECHANICAL SPECIFICATIONS

4160

4161

4162

Dimensions

9 x 16.5 x 6 inches

3 x 12.5 x 2 inches

3 x 13 x 2 inches

(W x L x H)

22.5 x 41 x 15 cm

7.5 x 31.5 x 5 cm

7.5 x 32.5 x 5 cm

Operating Weight

14 lbs (5.4 kg)

2.5 lbs (1.13 kg)

2.6 lbs (1.18 kg)

Certifications

cTUVus, CE, WEEE, RoHS





Power Input

100VAC +/-10%, 50-60Hz 115VAC +/-10%, 50-60 Hz 230VAC +/- 10%, 50-60 Hz

100VAC +/-10%, 50-60Hz 115VAC +/-10%, 50-60 Hz 230VAC +/- 10%, 50-60 Hz

100VAC +/-10%, 50-60Hz 115VAC +/-10%, 50-60 Hz 230VAC +/- 10%, 50-60 Hz

Main Fuses

(100VAC units) 4A (115VAC units) 4A (230VAC units) 2A







.250 - .688 inches .062 & .094 inch wall thickness

.375 - 1.00 inches .125 inch wall thickness

Temperature

59° -95° F (15° - 35°C)

59° -95° F (15° - 35°C)

59° -95° F (15° - 35°C)

Humidity

70% maximum relative humidity (non-condensing)

70% maximum relative humidity (non-condensing)

70% maximum relative humidity (non-condensing)

Compressed Air Supply

Not Required





ELECTRICAL SPECIFICATIONS

PERFORMANCE FACTORS Tubing Sizes (O.D.)

OPERATING CONDITIONS

Vante | 100 N. Tucson Boulevard, Tucson, Arizona 85716 USA | Toll-free 877.565.5557 | 5 20.881.6555 | Fax 520.326.0863 | vante.com

34000820-01 Rev. D

BIOPHARMACEUTICAL