TIC SENSOR

development of communication systems based on the ... of all-IP wireless sensors - based on the 6LoWPAN (IPv6) technology standardised by the IETF - a...

0 downloads 29 Views 247KB Size
TIC SENSOR

WATTECO series The WATTECO series benefits from a know-how in the development of communication systems based on the 6LoWPAN standard, the adaptation of IP layers to constrained networks in buildings where radio bandwidths are limited and where optimising the consumption of equipment is imperative. WATTECO distinguishes its product offering by providing a range of all-IP wireless sensors - based on the 6LoWPAN (IPv6) technology standardised by the IETF - and Box (sensors optionally non battery-operated). The deployment of IP networks for low-power automation applications allows "Internet" uses to be generalised to sensor networks.

ADVANTAGES > Long Range Radio Technology (LoRa) up to 4km in free field.

> Standardised protocol IPv6 6LoWPAN

> Significant optimisation of energy consumptions for battery-operated sensors, or even energy self-sufficiency for energy harvesting sensors

IP TECHNOLOGY IP technology is a clear alternative to fieldbuses usually operated in the sectors of construction and energy efficiency. The layer model as per the OSI standard ensures network constraints are isolated from user applications.

Operating over IP in sensor networks provides many options in terms of configurations or application functionalities. Thanks to this solution, all the elements that make up the network can communicate natively over IP without the need for specific network software layers.

Head office: Rue Gutenberg, ZI Kerandré - 56700 Hennebont – France // Tel: 33 (0)2 97 36 10 12 - Fax: 33 (0)2 97 36 55 17 Paris office: 33 rue pierre Marin - 91270 Vigneux sur seine – France // Tel: 33(0)1 69 52 28 31 - Fax: 33(0)1 69 52 31 24 [email protected] | www.nke-watteco.com SARL au capital de 400 000 € - RCS Lorient 538 107 079 - N° de Gestion 2011 B 955 – Code NAF 2651 B – TVA FR 10 538 107 079

Customer Information System (CIS) SENSOR Presentation 

 

DIN Rail 1U grey housing; size 36 x 85 x 66 mm to be mounted on the electrical board and connected to the CIS output of the electric meter; material: PC/GF; interfaces: 2 buttons (ON/OFF, zero setting), 2 LEDs (configuration and pairing) Installation on electric board

Power supply 

This module est fully self-sufficient in terms of power supply. It recharges directly from the CIS output of the meter since this output provides a small amount of power that is sufficient for the continuous decoding of the CIS signal and transmission of alert-based and periodical frames (up to 1-2 frames per minute).

Communication 



Radio frequency link to the PAN Router: ultra long range radio technology using a specific spread spectrum modulation in the 868 MHz band (up to 4 km in free field). Data upload: up to 1-2 frames per minute.

Specifications 

 



Software -OS: Contiki -Physical Layer: LORA™-868MHz -MAC Layer: IEEE 802.15.4-2006 (non beacon enabled CSMA/CA) -Network: IPv6 / 6LoWPAN -Routing: Leaf Mode RPL -Transport/presentation: UDP -Application: pseudo ZCL Self-organizing network Meters supported: CBEMM, CBEMM-ICC, CJE, ICE Configuration of type, frequency, data upload

Head office: Rue Gutenberg, ZI Kerandré - 56700 Hennebont – France // Tel: 33 (0)2 97 36 10 12 - Fax: 33 (0)2 97 36 55 17 Paris office: 33 rue pierre Marin - 91270 Vigneux sur seine – France // Tel: 33(0)1 69 52 28 31 - Fax: 33(0)1 69 52 31 24 [email protected] | www.nke-watteco.com SARL au capital de 400 000 € - RCS Lorient 538 107 079 - N° de Gestion 2011 B 955 – Code NAF 2651 B – TVA FR 10 538 107 079