SIGFOX- Flash'O- Data Sheet -v1 - nke Watteco

Smart Metering Smart Building SIGFOXTMFLASH’O APPLICATIONS § Wireless AMR –Smart metering § Infrastructure: all meters with flash LED interface can be...

0 downloads 20 Views 314KB Size
Smart Metering

Smart Building

Smart Industry

SIGFOXTM FLASH’O FLASH’O is a SIGFOXTM meter interface radio transmitting the accumulated flash LED numbers from any pulse meters: water, gas, electricity, energy.

APPLICATIONS

SIGFOXTM Flash’O – V1.2 Updated 19/09/2017 - This document is the property of nke Watteco. Information contained within is not contractual and is susceptible to modifications without advance notice

§ Wireless AMR – Smart metering § Infrastructure: all meters with flash LED interface can be integrated quickly and cost-effectively into a SIGFOXTM network without expensive and timeconsuming cabling.

BENEFITS & KEY FEATURES § § § § § §

SIGFOXTM Easy to use and deploy Data compression for batch report IP55 Up to 12 years autonomy Up to 250 pulses/second Flash LED rate counting and accumulation

QUALITY & RELIABIITY § CE Compliant § RoHS compliant § Radio-equipment directive 2014/53/UE

The SIGFOXTM FLASH’O from nke Watteco. is a long range, low power consumption, high performance and high quality sensor. It operates with any commercial electronic meter products equipped with a blinking LED and provides connection to the SIGFOXTM wireless network.

The accumulated number of flashes can be locally stored, concatenated and compressed. This unique batch mechanism significantly reduce the amount of data transmission for demanding applications such as load curve and drastically increase the autonomy.

Flash’O counts and accumulates the number of LED flashes that occurred since it has been commissioned. Based on the Impulsions per kWh or Wh indicated on the meter, the energy and power consumption can be computed.

Powered through a 3.6V lithium battery, in data compression mode, the estimated autonomy is up to 12 years when transmitting data one time per day and up to 8 years when reporting data one time per hour.

The optical probe is easily attached either by magnets or by velcro. Cable-length is approximately 0.5m.

.

NKE WATTECO, YOUR PARTNER IN SMART SENSORS & ACTUATORS We are a European leader in designing and manufacturing highly reliable and low power consumption smart sensors, actuators and multiprotocol remote data solutions.

© nkeWatteco - Head Quarter: rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 36 10 12 Paris Office: 33, rue Pierre Marin, 91270 Vigneux sur Seine, France - Tel +33(0)1 69 52 28 31 For further information, please contact us: [email protected] - www.nke-watteco.com

SIGFOXTM FLASH’O TECHNICAL CHARACTERISTICS Frequency (MHz)

EU: 868-870

Transmit Power (dBm)

+14

Receiver Sensitivity (dBm) FIRMWARE

-126

Protocol

SIGFOXTM

Data encryption

AES128

Measurement cycles

From 1h to 48h in 1h step

Measurement frame transmission cycles

From 2h to 48h in 1h step

Information frame transmission cycles

From 0 day to 30 days in 1day step

Data compression

yes (differential coding) or no

Alarm detection

yes or no

Alarm level LED SENSOR

Battery level: 0,1V to 3,6V by 0,1V step

Flash rate

Supports any meters LED flashing up to 250 pulses per second Note that autonomy is reduced at max. flash rate.

POWER

Power supply

3,6V / 3600mAh 3,6V lithium battery

Autonomy within a +10°C to +25°C temperature range

>12 years in data compression mode when transmitting 1 time per day >8 years in data compression when transmitting 1 time per hour

INTERFACE LED Indicator

3 LEDs for Configuration and Network pairing

Magnetic Switch MECHANICAL FEATURES

Reset, ON/OFF

Dimension (mm)

84x82x85

IP Class

IP55

Mounting

Optical probe attachment either by magnets or by Velcro Cable-length is approx. 0.5m

ENVIRONMENTAL

Operating temperature (°C)

-20 / +50

Storage temperature (°C) DIRECTIVES & STANDARD

-10 / +30

EN, 61000-4-2 EN 300-220-1 V2-4-1, EN 301 489 V1-6-1 CE and RoHS recommendation compliant

ORDERING INFORMATION REFERENCE

MODEL DESCRIPTION

50-09-072

FLASH’O with LED sensor mounted in factory with 0.5m cable-length

© nkeWatteco - Head Quarter: rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 36 10 12 Paris Office: 33, rue Pierre Marin, 91270 Vigneux sur Seine, France - Tel +33(0)1 69 52 28 31 For further information, please contact us: [email protected] - www.nke-watteco.com

SIGFOXTM Flash’O – V1.2 Uodated 19/09/2017 - This document is the property of nke Watteco. Information contained within is not contractual and is susceptible to modifications without advance notice

RF TRANSCEIVER