Readers and Credentials

Contacts For additional offices around the world, see www.hidglobal.com corporate offices. ... Haverhill Business Park Phoenix Road Haverhill, Suffolk...

0 downloads 28 Views 4MB Size
READERS AND CREDENTIALS HOW TO ORDER GUIDE PLT-02630, B.6 June 2019 The digital Product Configurator is now available at www.hidglobal.com/configure Note: This document is subject to change without notice. The current version of this document is available for download at: https://www.hidglobal.com/document-library.

hidglobal.com

Readers and Credentials How to Order Guide, PLT-02630, B.6

Copyright ©2016 - 2019 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation.

Trademarks HID Global, HID, the HID Brick logo, the Chain Design, CORPORATE 1000, DUOPROX, ENTRYPROX, FLEXCARD, FLEXISO, FLEXPASS, FLEXSMART, GENUINE HID, HID ELITE, HID MOBILE ACCESS, ICLASS, ICLASS ELITE, ICLASS SE, INDALA, ISOPROX, EDGE, EDGE EVO, MAXIPROX, MICROPROX, MINIPROX, MULTICLASS, MULTICLASS SE, PIVCLASS, PROXCARD, PROXCARD II, PROXKEY, PROXPASS, PROXPOINT, PROXPRO, SECURE IDENTITY OBJECT, SEOS, THINLINE II, and UNIVERSITY 1000 are the trademarks or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. MIFARE, MIFARE DESFire, MIFARE Classic, and MIFARE DESFire EV1 are registered trademarks of NXP B.V. and are used under license.

Revision History Date

Description

Version

June 2019 April 2019

Minor updates. Added iCLASS SE Express and Biometric (RB25F) Readers. Added iCLASS Seos 8K with MIFARE Classic or DESFire EV1 Implementation – 5806/5906. New “Understanding Credentials” section, revised iCLASS SE Encoder section, various minor updates to credential product pages including programming forms. Updated Mobile Access section. Updated to include iCLASS SE and multiCLASS SE Bluetooth and OSDP Upgrade Kits

B.6 B.5

January 2019

October 2018 September 2018

B.4

B.3 B.2

Contacts For additional offices around the world, see www.hidglobal.com corporate offices. North America

Asia Pacific

611 Center Ridge Drive Austin, TX 78753 USA Phone: 866-607-7339 Fax: 949-732-2120

19/F 625 King’s Road North Point, Island East Hong Kong Phone: 852 3160 9833 Fax: 852 3160 4809

Europe, Middle East and Africa

Brazil

Haverhill Business Park Phoenix Road Haverhill, Suffolk CB9 7AE England Phone: 44 (0) 1440 711 822 Fax: 44 (0) 1440 714 840

Condomínio Business Center Av. Ermano Marchetti, 1435 Galpão A2 CEP 05038-001 Lapa - São Paulo/SP Brazil Phone: 55 11 5514-7100

HID Global Customer Support: www.hidglobal.com/support

Page 2 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

CONTENTS Contents ....................................................................................................................................................... 3 Readers ........................................................................................................................................................ 6 Understanding HID Global Readers ......................................................................................................................... 6 HID Global Product Configurator: https://www.hidglobal.com/configure .............................................................. 6 What should I know about security keysets? ....................................................................................................... 6 How can I order HID Elite configured readers? .................................................................................................... 6 How can I check the status of my order? ............................................................................................................. 6 Selecting the Right Reader ....................................................................................................................................... 7 iCLASS SE Readers ................................................................................................................................................. 8 iCLASS SE Reader - Seos Profile with Bluetooth Option ..................................................................................... 8 iCLASS SE Reader - Standard Profile with Bluetooth ........................................................................................ 10 iCLASS SE Reader - Biometric .......................................................................................................................... 12 iCLASS SE Reader - Standard Profile ............................................................................................................... 13 iCLASS SE Express Reader .............................................................................................................................. 15 iCLASS SE Biometric Reader - Wiegand or OSDP............................................................................................ 16 iCLASS SE Reader - Magnetic Stripe ................................................................................................................ 17 pivCLASS Reader - FIPS 201 Strong Authentication ......................................................................................... 19 pivCLASS Reader - Wiegand or OSDP ............................................................................................................. 21 iCLASS SE U90 - UHF Long Range Reader ..................................................................................................... 22 iCLASS SE Reader Accessories ........................................................................................................................ 23 EDGE® Reader - EDGE EVO Solo .................................................................................................................... 26 iCLASS Reader Accessories ............................................................................................................................. 27 HID Proximity Readers ........................................................................................................................................... 28 ProxPoint Plus Proximity Reader - 6005 / 6008 ................................................................................................. 28 MiniProx Proximity Reader - 5365 / 5368 ........................................................................................................... 29 ProxPro Family Proximity Reader - 5455 / 5458 / 5355 / 5352 / 5358 ............................................................... 30 ThinLine II Proximity Reader - 5395 / 5398 ........................................................................................................ 31 MaxiProx Proximity Reader - 5375..................................................................................................................... 32 EntryProx Proximity Reader - 4045 .................................................................................................................... 33 HID Proximity Reader Accessories .................................................................................................................... 34 Indala Proximity Readers ........................................................................................................................................ 36 Overview ............................................................................................................................................................ 36 Advantage Series Reader - ASR 620................................................................................................................. 36 FlexPass™ Reader - FP Arch / Keypad ............................................................................................................. 37 FlexPass Accessories ........................................................................................................................................ 38

HID Mobile Access .................................................................................................................................... 39 What Is HID Mobile Access? .................................................................................................................................. 39 Creating HID Mobile Access User Account ............................................................................................................ 39 Ordering Information – Readers for HID Mobile Access ......................................................................................... 40 Ordering Information – Mobile Identities Service .................................................................................................... 41

Credentials ................................................................................................................................................. 42 Understanding HID Credentials .............................................................................................................................. 42 HID Global Product Configurator: https://www.hidglobal.com/configure ............................................................ 42 What should I know about security keysets? ..................................................................................................... 42 How can I order HID Elite configured credentials? ............................................................................................. 42 How can I migrate from my current credential technology? ............................................................................... 43 What is the difference between iCLASS Seos, iCLASS SE and iCLASS credentials? ...................................... 43 Credentials Marking ................................................................................................................................................ 44

June 2019

Page 3 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Credential Marking Technology.......................................................................................................................... 44 Understanding Credential Formats ......................................................................................................................... 44 Format Structure ................................................................................................................................................ 44 What format do I need? ...................................................................................................................................... 45 Common Formats .............................................................................................................................................. 45 Format Compatibility .......................................................................................................................................... 46 Understanding Credential Programming ................................................................................................................. 47 How do I complete the programming section correctly? ..................................................................................... 47 iCLASS Seos Credentials ....................................................................................................................................... 48 iCLASS Seos Card - 500 ................................................................................................................................... 48 iCLASS Seos + iCLASS Card - 522 ................................................................................................................... 49 iCLASS Seos + Prox Card - 510 ........................................................................................................................ 51 iCLASS Seos + iCLASS + Prox Card - 520 B.5 ................................................................................................. 52 iCLASS Seos 8K with MIFARE Classic or DESFire EV1 Implementation – 5806/5906 ..................................... 53 iCLASS SE Credentials .......................................................................................................................................... 55 iCLASS SE Card - 300 / 305 .............................................................................................................................. 55 iCLASS SE + Prox Card - 315 ........................................................................................................................... 56 iCLASS SE Key - 325 ........................................................................................................................................ 58 iCLASS SE Tag - 330 ........................................................................................................................................ 59 iCLASS SE Clamshell Card - 335 ...................................................................................................................... 60 iCLASS SE + Other HF Card - 391 .................................................................................................................... 61 iCLASS SE + Other 13.56 MHz + Prox Card - 396 ............................................................................................ 63 iCLASS Credentials ................................................................................................................................................ 65 iCLASS Card - 200 / 210 .................................................................................................................................... 65 iCLASS + Prox card - 212 .................................................................................................................................. 66 iCLASS Key - 205 .............................................................................................................................................. 68 iCLASS Tag - 206 .............................................................................................................................................. 69 iCLASS Clamshell Card - 208 ............................................................................................................................ 70 iCLASS + Other HF Card - 242 ......................................................................................................................... 71 iCLASS + Other 13.56 MHz + Prox Card - 262 ................................................................................................. 73 UHF Credentials ..................................................................................................................................................... 75 UHF Card - 600 .................................................................................................................................................. 75 UHF + iCLASS Card - 601 ................................................................................................................................. 76 UHF + MIFARE Classic Card - 603 .................................................................................................................... 77 HID Proximity Credentials ....................................................................................................................................... 79 ProxCard II Card - 1326 ..................................................................................................................................... 79 DuoProx® II Card - 1336 / 1536 .......................................................................................................................... 80 ProxKey III Keyfob - 1346 .................................................................................................................................. 81 ISOProx® II Card - 1386 / 1586 .......................................................................................................................... 82 ProxPass® II Active Vehicle Identification Tag - 1351 ........................................................................................ 83 MicroProx® Tag Proximity - 1391 ....................................................................................................................... 84 Indala 125 kHz Credential ...................................................................................................................................... 86 FPISO - FlexPass Imageable Card .................................................................................................................... 87 FPCRD - FlexCard Standard Card ..................................................................................................................... 88 FPTAG - FlexTag ............................................................................................................................................... 89 FPKEY - FlexKey Keytag ................................................................................................................................... 90 MIFARE Credentials ............................................................................................................................................... 92 MIFARE Classic Card - 340 / 345 / 1430 / 1440 / 1436 / 1446 .......................................................................... 92 MIFARE Classic + Prox card - 350 / 355 / 1431 / 1441 / 1437 / 1447 ................................................................ 94 MIFARE Classic Keyfob - 1434 / 1444 ............................................................................................................... 96 MIFARE Classic Adhesive Tag - 1435 ............................................................................................................... 97 MIFARE DESFire EV1 Card - 370 / 375 / 1450 / 1456....................................................................................... 98 MIFARE DESFire EV1 + Prox Card - 380 / 385 / 1451 / 1457 ........................................................................... 99

Page 4 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

CP1000 iCLASS SE Encoder .................................................................................................................. 101 iCLASS SE Encoder Summary ........................................................................................................................ 101 iCLASS SE Encoder - How Does it Work? ....................................................................................................... 101 iCLASS SE Encoder Ordering Basics .............................................................................................................. 101 Step 5: Encoder Order Form ............................................................................................................................ 108

June 2019

Page 5 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

READERS Understanding HID Global Readers Can I configure my reader product online? Yes, HID Global is now offering the HID Global Product Configurator. This online tool will guide customers and partners toward the most suitable product for their needs. There are two main features available with this tool: 

Find by part number - allows customers to enter an existing part number to see the specification of this reader



Build a reader - helps customers construct a complete part number, including keyset and configuration; everything needed to place an order. Customers will be able to download a PDF with all specifications of the reader they build to allow for a smooth ordering process.

HID Global Product Configurator: https://www.hidglobal.com/configure

What should I know about security keysets? iCLASS SE® readers and iCLASS Seos®/iCLASS SE credentials offer two keyset security schemes, HID Elite™ and Standard. The HID Elite Security Program supports a unique keyset on a per site/company basis. The keyset governs a variety of keys, including: 

Media (credential) keys for iCLASS SE, SIO-encoded iCLASS, MIFARE Classic® (SIO®) and MIFARE DESFire EV1® (SIO) credentials



SIO authenticity and privacy keys (media independent)



Configuration programming keys (for programming reader configuration, also media independent)

When utilizing HID’s standard key set for the above keys, all standard keyed credentials work with all standard keyed readers. Additionally, any Standard Security configuration card configures a Standard Security reader (only accomplished during the first five (5) seconds after reader powers-up). Conversely, when utilizing the HID Elite program, only site/company specific HID Elite credentials and configuration cards work with matching readers. The Standard Security Program provides universal keysets that offer maximized compatibility by keying readers and cards with matching security for use in the general population. This allows for maximized compatibility because readers and cards are not keyed on a per site/company basis but rather all keyed the same. This offers the advantage to the integrator as a standard stock of readers and cards will interoperate for a variety of sites/companies, rather than needing different stocks of readers and cards for each individual site. iCLASS SE readers provide two Standard Security Keysets that offer compatibility with the following credentials: Standard Security Keyset

Compatibility with these Credentials

Version 1

iCLASS Seos (+ Prox) iCLASS SE (+ Prox) iCLASS SR (+ Prox) iCLASS® (+ Prox) MIFARE Classic (+ Prox) MIFARE DESFire EV1 (+ Prox)

Version 2

iCLASS Seos (+ Prox) iCLASS SE (+ Prox) MIFARE Classic (+ Prox) MIFARE DESFire EV1 (+ Prox)

How can I order HID Elite configured readers? 

Direct customers of HID must be authorized to purchase components with HID Elite keys. If you are not authorized, you must have the key owner authorize you through the Authorization form. See http://www.hidglobal.com/services/secure-identity/credential-programs/iclass-elite-and-se-elite.



Ensure the HID Elite flag is set in the part number (of readers, credentials and programming cards).



All Purchase Orders for HID Elite components must be ordered with the HID Elite reference number (starts with ICE or MOB).

How can I check the status of my order? 

To check order status, go to: https://orderstatus.hidglobal.com/WebOrderStatus/

Page 6 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Selecting the Right Reader In order to make sure our customers benefit from the latest and most secure technology, based on their needs and current situation, HID Global offers a reader product guidance. Follow the suggested route below based on your current credential population, to see what reader solution is recommended by HID Global.

START

Credentials already issued/deployed?

NO HID Global recommends: iCLASS SE - Seos Profile readers Simplest configuration as well as best-in-class security and privacy protection.

YES

iCLASS Seos and/or HID Prox cards only?

YES

NO HID Global recommends: iCLASS SE Magnetic Stripe readers

Magnetic stripe cards?

YES

Backwards compatible with magnetic stripe cards, future capable to support newer credential technologies.

NO

FIPS 201 standard cards (PIV, CIV, CAC, TWIC etc.)?

YES

HID Global recommends: pivCLASS readers Support for FIPS 201 standard cards (PIV, CIV, CAC, TWIC etc.).

NO

HID Global recommends: iCLASS SE - Standard Profile readers

Broad compatibility with legacy and new credential technologies, including iCLASS Seos, iCLASS SE, iCLASS and Indala Prox.

June 2019

Page 7 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Readers Note: See Selecting the Right Reader on page 7 for guidance.

iCLASS SE Reader - Seos Profile with Bluetooth Option Application: Designed to instill confidence with best-in-class security and privacy protection. Technologies Supported: iCLASS Seos, HID Prox, and HID Mobile Access® Mobile IDs via NFC and/or Bluetooth Smart.

1. Select one option from each of the following sections to construct part number Reader Model (Select one model) 900 - Model R10 - Designed for door applications requiring a small footprint card reader.

910 - Model R15 - Designed for door applications requiring a mullion style mounting.

920 - Model R40 - Designed for door applications requiring standard wall switch mounting.

921 - Model RK40 - Designed for door applications requiring standard wall switch mounting and keypad input.

125 kHz Credential Support (Select one option) N - No 125 kHz support P - Support for HID Prox

13.56 MHz and Bluetooth credential support (Select one option) S - Supports iCLASS Seos cards, and Mobile IDs via NFC B - Supports iCLASS Seos cards, and Mobile IDs via NFC and Bluetooth Smart.

Controller Communication N – Wiegand P - OSDP

Wiring Connection (Select one option) N - Pigtail T - Terminal strip

Hardware Revision E - Revision E

Color K - Black

Keyset (Select one option) 2 - Standard and Mobile-Ready - supports iCLASS Seos credentials with standard keys. Prepared to support HID Mobile Access, but lacks the personalized configuration to read an organization’s specific Mobile IDs. This configuration can be ordered at any time but will require field activation after the organization has completed registration for HID Mobile Access. E - HID Elite and Mobile-Enabled - supports iCLASS Seos credentials and Mobile IDs. Fully activated and personalized to support an organization’s specific Mobile IDs. These readers can only be ordered after the organization has completed registration for either HID Elite or HID Mobile Access. If HID Elite reference (ICE) is given at time of order, only iCLASS Seos credentials with HID Elite keys are supported. If Mobile Reference (MOB) is given at time of order, only iCLASS Seos credentials with standard keys are supported.

Configuration Settings 0000 - Standard configuration. All iCLASS SE Readers - Seos Profile ship with the following standard configuration:  LED normally red, LED flashes green and beeps on card read  Keypad output is 4-bit (if keypad reader) Non-standard configuration can be applied at time of installation using the configuration card accessories listed on next page.

Page 8 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

2. Enter the numbers/letters from the selections above into the table below The resulting “Final Part Number” is used when ordering reader. Reader Model

920

Example Final Part Number

125 kHz

N

13.56 MHz

S

Communication

N N

Wiring

HW Rev

Color

E E

K K

T

Keyset

E

Config Setting

0000 0000

3. Place an order To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service. Contact information is available at: http://www.hidglobal.com/customer-service Need credentials? Credentials supported by this reader model includes (depending on options chosen above): 

Mobile IDs



iCLASS Seos



iCLASS Seos + Prox

iCLASS SE Reader - Seos Profile Configuration Cards Config Card Number

Description

SE-SEOS-2-CRD0

iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - all cards (21 cards)

SE-SEOS-E-CRD0

iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - all cards (21 cards)

SE-SEOS-2-CRD1

iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - Seos and prox settings (4 cards) Contains cards used to change the priority setting of iCLASS Seos and Prox technologies

SE-SEOS-2-CRD2

iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - Panel output settings (3 cards) Contains cards used to change the reader output between Wiegand and OSDP

SE-SEOS-2-CRD3

iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - Audio visual settings (13 cards) Contains cards used to change behaviour of reader LED and beeper

SE-SEOS-2-CRD4

iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - keypad format settings (4 cards) Contains cards used to change output settings of keypad reader models

SE-SEOS-E-CRD1

iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - Seos and prox settings (4 cards) Contains cards used to change the priority setting of iCLASS Seos and Prox technologies

SE-SEOS-E-CRD2

iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - Panel output settings (3 cards) Contains cards used to change the reader output between Wiegand and OSDP

SE-SEOS-E-CRD3

iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - Audio visual settings (13 cards) Contains cards used to change behaviour of reader LED and beeper

SE-SEOS-E-CRD4

iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - keypad format settings (4 cards) Contains cards used to change output settings of keypad reader models

Note: The above configuration cards are only intended for use with iCLASS SE Reader - Seos profile.

June 2019

Page 9 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Reader - Standard Profile with Bluetooth Application: Designed to ensure compatibility with legacy credentials and capability to support the future. Technologies Supported: Wide variety of contactless credentials including HID Mobile Access Mobile IDs via NFC and/or Bluetooth Smart.

1. Select one option from each of the following sections Reader Model (Select one model) 900 - Model R10 - Designed for door applications requiring a small footprint card reader. 910 - Model R15 - Designed for door applications requiring a mullion style mounting.

920 - Model R40 - Designed for door applications requiring standard wall switch mounting.

921 - Model RK40 - Designed for door applications requiring standard wall switch mounting and keypad input.

125 kHz Credential Support (Select one option) N - No 125 kHz support P - Support for HID Prox, AWID and EM4102 (32 bits)

13.56 MHz and Bluetooth Credential Support M - Support for HID Mobile Access Mobiles IDs via NFC and Bluetooth Smart - reader equipped with Bluetooth Smart module. Also supports iCLASS Seos, iCLASS SE, iCLASS SR, iCLASS, MIFARE Classic (SIO), MIFARE DESFire EV1 (SIO) and ISO 14443 UID.

Controller Communication (Select one option) N - Wiegand C - Clock & Data P - OSDP

Wiring Connection (Select one option) N - Pigtail T - Terminal strip

Hardware Revision E - Revision E

Color K - Black

Keyset (Select one option) M - Mobile-Ready: Prepared to support HID Mobile Access, but lacks the personalized configuration to read an organization’s specific Mobile IDs. This configuration can be ordered at any time but will require field activation after the organization has completed registration for HID Mobile Access. E - Mobile-Enabled: Fully activated and personalized to support an organization’s specific Mobile IDs. These readers can only be ordered after the organization has completed registration for either HID Elite or HID Mobile Access. If HID Elite reference (ICE) is given at time of order, only iCLASS Seos credentials with HID Elite keys are supported. If Mobile Reference (MOB) is given at time of order, only iCLASS Seos credentials with standard keys are supported.

Page 10 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Configuration Setting (Select one option) Standard configuration: All iCLASS SE Readers - Standard Profile with Bluetooth Smart ship with the following features 

Controller Communication = N - Wiegand, or P - OSDP



LED normally red, LED flashes green and beeps on card read



Keypad output is 4-bit (if keypad reader)

This configuration is represented by the following standard configuration setting extensions listed. Communication

125 kHz Support

Keypad Reader

N - No N - Wiegand P - Yes

N - No P - OSDP P - Yes

Extension

No

A001

Yes

A002

No

A003

Yes

A004

No

A005

Yes

A006

No

A007

Yes

A008

ANY other option selected (including Clock & Data communication) requires a Non-Standard configuration EXTENSION. To determine configuration options, use the Select tab on the iCLASS SE Configuration Guide spreadsheet at the following link: www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you determine your final configuration.

2. Enter the numbers/letters from the previous selections into the following table The resulting “Final Part Number” is used when ordering reader. Reader Model Example

920

Final Part Number

125 kHz N

13.56 MHz M

Communication N

M

Wiring T

HW Rev

Color

E

K

E

K

Keyset M

Config Setting A001

3. Place an order To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service. Contact information is available at: http://www.hidglobal.com/customer-service Need credentials? Credentials supported by this reader model includes (depending on options chosen above): 

Mobile IDs



iCLASS Seos



iCLASS



iCLASS SE



MIFARE DESFire EV1



MIFARE Classic

June 2019

Page 11 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Reader - Biometric Application: Designed to ensure compatibility with legacy credentials and capability to support the future. Technologies Supported: Wide variety of contactless credentials including iClass Seos, iClass SE and iClass. Also supports OSDP, Wiegand and GPIO.

1. Select one option from each of the following sections Reader Model (Select one model) RB25F - Designed for door applications requiring a small footprint card reader.

Wiring Connection N - Pigtail

Color K - Black

Keyset 00– Standard (Non Elite) 01– Elite (Your Elite Key / MOB Key will need to be provided.)

2. Enter the numbers/letters from the previous selections into the following table The resulting “Final Part Number” is used when ordering reader. Reader Model

Wiring

Color

Keyset

Final Part Number (Standard)

RB25F

N

K

-00-

0000-0000

Final Part Number (Elite)

RB25F

N

K

-01-

0000-0000

3. Place an order To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service. Contact information is available at: http://www.hidglobal.com/customer-service Need credentials? Credentials supported by this reader model includes (depending on options chosen above): 

Mobile IDs



iCLASS Seos



iCLASS



iCLASS SE



MIFARE DESFire EV1



MIFARE Classic

Page 12 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Reader - Standard Profile Application: Designed to ensure compatibility with legacy credentials and capability to support the future. Technologies Supported: Wide variety of contactless credentials including HID Mobile Access Mobile IDs via NFC.

1. Select one option from each of the following sections Reader Model (Select one model) 900 - Model R10 - Designed for door applications requiring a small footprint card reader.

921 - Model RK40 - Designed for door applications requiring standard wall switch mounting. Supports keypad input.

910 - Model R15 - Designed for door applications requiring a mullion style mounting.

940 - Model R90 - Designed for vehicle access applications requiring extended read range.

920 - Model R40 - Designed for door applications requiring standard wall switch mounting.

95A - Décor model - Designed for door applications requiring low profile EU square wall switch mounting.

125 kHz Credential Support (Select one option) N - None P - Supports HID Prox, AWID and EM4102 (32 bits). Not available on models 940 or 95A. L - Supports Indala® Prox, please make sure to provide needed format at time of order. Not available on models 929, 940 or 95A. Not available with OSDP communication and/or Custom Programming or Transit.

iCLASS

MIFARE Classic (SIO)

MIFARE DESFire EV1 (SIO)

Mobile IDs via NFC

FeliCa IDm

CEPAS CAN or UID





-







-

-

-

-

-

-

T - Maximum compatibility















-



-

-

-

-

R - FeliCa and CEPAS1















-



-

-





W - Custom programming2















-







-

-

MIFARE Classic (Custom data)

iCLASS SR



ISO14443 UID

iCLASS SE

N - High security

Mobile IDs via Bluetooth Smart

iCLASS Seos

MIFARE DESFire EV1 (Custom data)

13.56 MHz Credential Support (Select one option)

● Supported ○ Optionally supported - Not supported

1

Not available on model 940. 2 Consult your regional technical support representative for specific configurations.

Controller Communication (Select one option) N - Wiegand C - Clock & Data P - OSDP

Wiring Connection (Select one option) N - Pigtail (Not available on models 929, 940 or 95A) T - Terminal strip

Hardware Revision E - Revision E

June 2019

Page 13 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Color (Select one option) K - Black W - White. Only available on 95A model. G - Gray. Only available on 95A model.

Keyset (Select one option) 0 - Standard v1 - Supports credentials with default HID keys, including iCLASS and iCLASS SR. 2 - Standard v2 - Supports credentials with default HID keys, not including iCLASS and iCLASS SR. E - HID Elite - Supports credentials with HID Elite keys, including iCLASS and iCLASS SR, and/or Mobile IDs. Key reference (ICE or MOB) required at time of order.

Configuration Setting 0000 - Standard configuration (not available on 929):  125 kHz Credential Support = N – None or P – Supports HID Prox, AWID and EM4102 (32 bits)  13.56 MHz Credential Support = T - Maximum Compatibility  Controller Communication = N - Wiegand  Keyset = 0 - Standard v1 or E - HID Elite  LED normally red, LED flashes green and beeps on card read  Keypad output is 4-bit (if keypad reader) xxxx - Non-Standard configuration: ANY other options selected above requires a Non-Standard 4 digit extension. To order non-standard configuration options, use the Select tab on the iCLASS SE Configuration spreadsheet at the following link www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you determine your final configuration.

2. Enter the numbers/letters from the selections above into the following table The resulting “Final Part Number” is used when ordering reader. Reader Model Example

920

125 kHz

13.56 MHz

Communication

Wiring

HW Rev

Color

Keyset

Config Setting

N

T

N

T

E

K

0

0000

Final Part Number

E

3. Place an order To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service. Contact information is available at: www.hidglobal.com/customer-service Need credentials? Credentials supported by this reader model include the following, depending on options chosen above: 

Mobile IDs



iCLASS Seos



iCLASS



iCLASS SE



MIFARE DESFire EV1



MIFARE Classic

Page 14 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Express Reader Application: Designed for mullion mount installations, Wiegand and pigtail compatibility. Technologies Supported: iCLASS Seos, ISO14443 UID and HID Mobile Access Mobile IDs via NFC and/or Bluetooth Smart.

1. Select one option from each of the following sections to construct part number Reader Model (Select one model) 900 - Model R10 - Designed for door applications requiring a small footprint card reader.

125 kHz Credential Support N - No 125 kHz support

13.56 MHz and Bluetooth credential support (Select one option) S - Supports iCLASS Seos cards, and Mobile IDs via NFC B - Supports iCLASS Seos cards, and Mobile IDs via NFC and Bluetooth Smart. C - Supports iCLASS Seos cards, Mobile IDs via NFC and ISO14443 UID. D - Supports iCLASS Seos cards, Mobile IDs via NFC and Bluetooth Smart and and ISO14443 UID.

Controller Communication N - Wiegand

Wiring Connection N - Pigtail

Hardware Revision F - Revision F

Color K - Black

Keyset (Select one option) 2 - Standard and Mobile-Ready - supports iCLASS Seos credentials with standard keys. Prepared to support HID Mobile Access, but lacks the personalized configuration to read an organization’s specific Mobile IDs. This configuration can be ordered at any time but will require field activation after the organization has completed registration for HID Mobile Access. E - HID Elite and Mobile-Enabled - supports iCLASS Seos credentials and Mobile IDs. Fully activated and personalized to support an organization’s specific Mobile IDs. These readers can only be ordered after the organization has completed registration for either HID Elite or HID Mobile Access. If HID Elite reference (ICE) is given at time of order, only iCLASS Seos credentials with HID Elite keys are supported. If Mobile Reference (MOB) is given at time of order, only iCLASS Seos credentials with standard keys are supported.

Configuration Settings 0000 - Standard configuration. All iCLASS SE Express Readers ship with the following standard configuration:  LED normally red, LED flashes green and beeps on card read Non-standard configuration can be applied at time of installation using the HID Reader Manager mobile application available in the Apple App Store and Google play store. xxxx - Non-Standard configuration: ANY other options selected above requires a non-standard 4 digit extension. To order non-standard configuration options, use the Build a new reader option on the HID Global Product Configurator website located at https://www.hidglobal.com/configure. Your HID Global Support or Sales representative can help you determine your final configuration.

2. Enter the numbers/letters from the selections above into the table below The resulting “Final Part Number” is used when ordering reader. Reader Model Example Final Part Number

900 900

125 kHz

N N

13.56 MHz

S

Communication

N N

Wiring

N N

HW Rev

Color

F F

K K

Keyset

2

Config Setting

0000 0000

3. Place an order To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service. Contact information is available at: http://www.hidglobal.com/customer-service Need credentials? Credentials supported by this reader model includes (depending on options chosen above): 

Mobile IDs



iCLASS Seos



iCLASS Seos + Prox

June 2019

Page 15 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Biometric Reader - Wiegand or OSDP Application: Designed for door applications requiring multi-factor authentication including biometric. Technologies Supported: iCLASS® Seos® 8kB and iCLASS® 16kb-32kb credentials

1. Select one option from each section below Reader Model (Select one model) 928 - Model RKLB40 - Designed for door applications requiring multi-factor authentication including biometric. Featuring an LCD display, biometric sensor and keypad.

125 kHz Credential Support N - No 125 kHz support

13.56 MHz credential support (Select one option) S – Supports biometric template on iCLASS Seos credentials F – Supports biometric template on iCLASS Seos, iCLASS SR and iCLASS credentials

Controller Communication (Select one option) N – Wiegand C - Clock & Data P – OSDP – Coming soon, contact your HID Sales Representative

Controller Connection T - Terminal strip

Hardware Revision E - Revision E

Color K - Black

iCLASS Support/Keyset (Select one option) 0 - Standard v1 – Supports iCLASS Seos, iCLASS SR and iCLASS credentials with default HID keys. 2 - Standard v2 - Supports iCLASS Seos credentials with default HID keys. E - HID Elite - Supports iCLASS Seos, iCLASS SR and iCLASS credentials with HID Elite keys. Key reference (ICE or MOB) required at time of order.

Configuration Setting Standard configuration iCLASS SE Biometric ship with the following features 

Controller Communication = N - Wiegand or P – OSDP



13.56 MHz Credential Support = S - iCLASS Seos or F - iCLASS Seos, iCLASS SR and iCLASS



LED normally red, LED flashes green and beeps on card read



Controller PIN verification with Keypad output 4-bit (local PIN verification is a non-standard configuration)

These configuration options are represented by the following standard configuration setting extensions listed. Controller Communication

13.56 MHz Credential Support

N - Wiegand

P - OSDP

Extension

S - iCLASS Seos

00TG

F - iCLASS Seos, iCLASS SR and iCLASS

00TE

S - iCLASS Seos

00TH

F - iCLASS Seos, iCLASS SR and iCLASS

00TF

ANY other option selected (including Clock & Data communication) requires a Non-Standard configuration EXTENSION. To determine configuration options, use the Select tab on the iCLASS SE Configuration Guide spreadsheet at the following link: www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you determine your final configuration.

2. Enter the numbers/letters from the selections above into the table below The resulting “Final Part Number” is used when ordering reader. Reader Model Example

928

Final Part Number

928

Page 16 of 109

125 kHz

13.56 MHz

Communication

Wiring

HW Rev

Color

N

F

N

T

E

K

T

E

K

Keyset 0

Config Setting xxxx

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Reader - Magnetic Stripe Application: Designed to ensure compatibility with legacy credentials and capability to support the future. Technologies Supported: Magnetic stripe cards and a wide variety of contactless credentials including HID Mobile Access Mobile IDs via NFC.

1. Select one option from each of the following sections Reader Model (Select one model) 922 - Model RM40 - Designed for door applications requiring standard wall switch mounting.

925 - Model RMK40 - Designed for door applications requiring standard wall switch mounting. Supports keypad input.

125 kHz Credential Support (Select one option) N - No 125 kHz support P - Support for HID Prox, AWID and EM4102 (32 bit)









-



-

-

N - High security Weigand







-







-

-

-

-

W - Custom programming*















-







MIFARE Classic (Custom data)

MIFARE Classic (SIO)



ISO14443 UID

iCLASS



Mobile IDs via Bluetooth Smart

iCLASS SR



Mobile IDs via NFC

iCLASS SE

T - Maximum compatibility

MIFARE DESFire EV1 (SIO)

iCLASS Seos

MIFARE DESFire EV1 (Custom data)

13.56 MHz Credential Support (Select one option)

● Supported ○ Optionally supported - Not supported

* Consult your regional technical support representative for specific configurations.

Controller Communication (Select one option) N - Wiegand C - Clock & Data P - OSDP

Wiring Connection (Select one option) N - Pigtail T - Terminal strip

Hardware Revision E - Revision E

Color K - Black

iCLASS Support/Keyset (Select one option) 0 - Standard v1 - Reads credentials with default HID keys including standard iCLASS and/or iCLASS SR. 2 - Standard v2 - Reads credentials with default HID keys not including standard iCLASS and/or iCLASS SR. E - HID Elite - Reads credentials with HID Elite keys, including iCLASS and iCLASS SR, and/or Mobile IDs. Key reference (ICE or MOB) required at time of order.

June 2019

Page 17 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Configuration Settings To determine configuration options, use the Select tab on the iCLASS SE Configuration Guide spreadsheet at the following link: www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you determine your final configuration.

2. Enter the numbers/letters from the selections above into the table below The resulting “Final Part Number” is used when ordering reader. Reader Model Example

125 kHz

922

N

13.56 MHz

N

Communication

N

Final Part Number

Wiring

T

HW Rev

Color

E

K

E

K

Keyset

2

Config Setting

xxxx

3. Place an order To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service. Contact information is available at: www.hidglobal.com/customer-service. Need credentials? Credentials supported by this reader model include (depending on options chosen above): 

Mobile IDs



iCLASS Seos



iCLASS



iCLASS SE



HID Prox



MIFARE DESFire EV1



MIFARE Classic

Page 18 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

pivCLASS Reader - FIPS 201 Strong Authentication Application: Designed for applications that leverage the pivCLASS® Authentication Module (PAM) to validate FIPS 201 credential certificates for the highest level of security. Technologies Supported: FIPS 201 credentials such as PIV, CIV, TWIC, CAC, and FRAC, and a wide variety of other contactless credentials.

1. Select one option from each section below Reader Model (Select one model) 900 - Model R10 - Designed for door applications requiring a small footprint card reader.

923 - Model RKCL40 - Designed for door applications requiring standard wall switch mounting. Featuring a contact slot, LCD display, and keypad.

920 - Model R40 - Designed for door applications requiring standard wall switch mounting.

924 - Model RKCLB40 - Designed for door applications requiring standard wall switch mounting. Featuring a contact slot, LCD display, biometric sensor, and keypad.

921 - Model RK40 - Designed for door applications requiring standard wall switch mounting. Supports keypad input.

125 kHz Credential Support (Select one option) N - No 125 kHz support P - Support for HID Prox, AWID and EM4102 (32 bit) (not available on model RKCLB40)

13.56 MHz credential support (Select one option) H - Contactless. Supports PKI-Based FIPS 201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC. This option is only available for models R10, R40 and RK40. P - Contactless + Contact. Supports PKI-Based FIPS 201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC. FIPS 201 type cards can be read using either the contact or contactless card interface (RKCL40). This option is only available for models RKCL40, and RKCLB40.

Controller Communication (Select one option) R - RS485 FDX. Full duplex is required when connecting a pivCLASS reader to a PAM. P - RS485 HDX OSDP. Half duplex connection requires a connection with an OSDP-compliant strong authentication controller infrastructure. Only available with RKCL40.

Controller Connection (Select one option) N - Pigtail T - Terminal strip

Hardware Revision E - Revision E

Color K - Black

Keyset (Select one option) 0 - Standard v1 - Reads credentials with default HID keys including standard iCLASS and/or iCLASS SR. E - HID Elite - Reads credentials with HID Elite keys, including iCLASS and iCLASS SR, and/or Mobile IDs. Key reference (ICE or MOB) required at time of order.

Configuration Setting (Select one option) Configuration setting extension for these reader models depends on the model and 125 kHz support chosen above, select from list below: Reader Model R10/R40

RK40

RKCL40 RKCLB40

June 2019

125 kHz Support

Extension

N - No

032Y

P - Yes

0007

N - No

033A

P - Yes

033B

N - No

032V

P - Yes

0008

N - No

0504

Page 19 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

2. Enter the numbers/letters from the selections above into the table below The resulting “Final Part Number” is used when ordering reader. Reader Model Example

125 kHz 900

N

13.56 MHz

Communication

H

Final Part Number

R R

Wiring T

HW Rev

Color

E

K

E

K

Keyset 0

Config Setting 032Y

3. Place an order To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service. Contact information is available at: www.hidglobal.com/customer-service. Need credentials? Credentials supported by this reader model includes (depending on options chosen above): 

iCLASS Seos



iCLASS SE



iCLASS



HID Prox



MIFARE DESFire EV1



MIFARE Classic

Page 20 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

pivCLASS Reader - Wiegand or OSDP Application: Designed to support FIPS 201 credentials and communicate to traditional intelligent controller using Wiegand or OSDP protocol Technologies Supported: FIPS 201 credentials such as PIV, CIV, TWIC, CAC, and FRAC and a wide variety of contactless credentials

1. Select one option from each section below Reader Model (Select one model) 900 - Model R10 - Designed for door applications requiring a small footprint card reader.

921 - Model RK40 - Designed for door applications requiring standard wall switch mounting.

920 - Model R40 - Designed for door applications requiring standard wall switch mounting.

923 - RKCL40 - Combination, contact plus contactless reader with keypad and LCD.

125 kHz Credential Support (Select one option) N - No 125 kHz support P - Support for HID Prox, AWID and EM4102 (32 bit)

13.56 MHz credential support (Select one option) H - Contactless. Supports PKI-Based FIPS 201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC. This option is only available for models R10, R40 and RK40. P - Contactless + Contact. Supports PKI-Based FIPS 201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC. FIPS 201 typecards can be read using either the contact or contactless card interface. This option is only available for model RKCL40.

Controller Communication (Select one option) R - Wiegand; Configurable to support RS-485 full duplex for communication with pivCLASS Authentication Module (PAM) P - Wiegand or OSDP via RS-485 half duplex; selectable through configuration. Not available for model with RKCL40.

Controller Connection (Select one option) N - Pigtail T - Terminal strip

Hardware Revision E - Revision E

Color K - Black

iCLASS Support/Keyset (Select one option) 0 - Standard v1 - Reads credentials with default HID keys including standard iCLASS and/or iCLASS SR. E - HID Elite - Reads credentials with HID Elite keys, including iCLASS and iCLASS SR, and/or Mobile IDs. Key reference (ICE or MOB) required at time of order.

Configuration Setting Obtaining individual pivCLASS reader configuration settings requires the use of the online Configuration Guide.

2. Enter the numbers/letters from the selections above into the table below The resulting “Final Part Number” is used when ordering reader. Reader Model Example

900

Final Part Number

125 kHz

13.56 MHz

Communication

Wiring

HW Rev

Color

N

H

R

T

E

K

E

K

R

Keyset

Config Setting

0

xxxx

3. Place an order To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service. Contact information is available at: http://www.hidglobal.com/customer-service Need credentials? This reader could support (depending on options chosen above) the following credentials: 

iCLASS Seos



iCLASS



iCLASS SE



HID Prox



MIFARE DESFire EV1



MIFARE Classic

June 2019

Page 21 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE U90 - UHF Long Range Reader Application: Designed for vehicle access control installations which require long range authentication and high throughput Technologies Supported: Ultra High Frequency (UHF) EPC GEN 2

1. Select one option from each section below to construct part number Reader Model (Select one model) RDRSEU90 - Model U90 - Contactless Smart Card Long Range Reader: Surface or Pole Mount.

Antenna Code (Select one option, see table below) 8 9 Country

Operating Frequency

Antenna Code

Country

Operating Frequency

Antenna Code

Country

Operating Frequency

Antenna Code

Argentina

902 - 928 MHz

9

Estonia

865 - 868 MHz

8

Mexico

902 - 928 MHz

9

Austria

865 - 868 MHz

8

Finland

865 - 868 MHz

8

Netherlands

865 - 868 MHz

8

Australia

915 - 928 MHz

9

France

865 - 868 MHz

8

New Zealand

921.5 - 928 MHz

9

Belgium

865 - 868 MHz

8

Germany

865 - 868 MHz

8

Poland

865 - 868 MHz

8

Brazil

902 - 928 MHz

9

Greece

865 - 868 MHz

8

Portugal

865 - 868 MHz

8

Bulgaria

865 - 868 MHz

8

Hungary

865 - 868 MHz

8

Romania

865 - 868 MHz

8

Canada

902 - 928 MHz

9

India

865 - 867 MHz

8

Slovakia

865 - 868 MHz

8

China

921 - 924 MHz

9

Ireland

865 - 868 MHz

8

Slovenia

865 - 868 MHz

8

Columbia

902 - 928 MHz

9

Italy

865 - 868 MHz

8

Spain

865 - 868 MHz

8

Croatia

865 - 868 MHz

8

Latvia

865 - 868 MHz

8

Sweden

865 - 868 MHz

8

Cyprus

865 - 868 MHz

8

Lithuania

865 - 868 MHz

8

United Arab Emirates

865 - 868 MHz

8

Czech Republic 865 - 868 MHz

8

Luxembourg 865 - 868 MHz

8

United Kingdom

865 - 868 MHz

8

Denmark

8

Malta

8

United States

902 - 928 MHz

9

865 - 868 MHz

865 - 868 MHz

Color K - Black

Keyset (Select one option) NOTE: Keyset is factory-configured only and cannot be configured in the field, via web interface or configuration cards. 0 - Standard Keyset E - HID Elite keyset - reads only HID Elite credentials with corresponding keyset. Line item on PO requires ICE reference number.

2. Enter the numbers/letters from the selections above into the table below The resulting “Final Part Number” is used when ordering reader. Product Class

Product Sub Class

Base Reader

Antenna Code 8

Example

RDR

SE

U90

Final Part Number

RDR

SE

U90

Color K K

Keyset 0

Configuration Setting 0000 0000

3. Place an order To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service. Contact information is available at: http://www.hidglobal.com/customer-service. Need credentials? This reader supports the following credentials: 

UHF cards



UHF + iCLASS cards

Page 22 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Reader Accessories Configuration Cards Use these cards for customer reader configuration. Readers may be reconfigured to a target configuration by applying the correct target configuration. Use the following link to access the iCLASS SE Configuration Worksheet www.hidglobal.com/node/19914 to determine the exact configuration required. Apply changes to the reader security using programming cards. Contact HID Technical Support (www.hidglobal.com/support) to ensure selecting the proper settings. Part Number Description Base Part No.

HID Elite (E) or Standard Security (0 or 2)

Reader Configuration Cards

Reconfigure reader to factory configuration settings (does not reconfigure reader admin or credential keys)

HID Elite Upgrade Cards3 Setup iCLASS SE or multiCLASS SE® readers for HID Elite credential keys or Reader admin keys HID Elite Downgrade Cards3 Setup iCLASS SE or multiCLASS SE readers for standard credential keys or reader admin keys

Configuration Settings1 -XXXX = Specific configuration

SEC9X-CRD-

E = HID Elite Key2 0 = Standard-1 key or standard-2 key2

-0000 = Factory configuration (Rx models) -0001 = Factory configuration (RPx models) -0002 = Factory configuration (RKx models) -0003 = Factory configuration (RPKx models)

E = HID Elite Key4

-P000 = HID Elite reader admin keys

E = HID Elite Key2

-P001 = HID Elite credential keys

SEC9X-CRDE = HID Elite Key

2

SEC9X-CRD0 = Standard-1 key or standard-2 key

-P002 = Standard reader admin keys -P003 = Standard-1 credential keys -P004 = Standard-2 credential keys

Configuration Settings All standard readers ship with the following features - 13.56 MHz interpreter “T” enabled, Wiegand “N” enabled, and Standard-1 “0” security keys enabled. ANY other option selected requires a specific configuration EXTENSION. To order non-standard configuration options, use the following link to access the iCLASS SE Configuration Worksheet https://www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you determine your final configuration. Standard configuration includes: LED normally Red + Reader beeps / flashes LED green on card read + Intelligent Power Management = Off + Keypad Output is 4-bit (if keypad reader) Note: Reader configuration cards change settings in an additive fashion. Configuration card settings only overwrite old settings for the options selected. Reader settings that have not been selected for the configuration retain their original values. To reset reader settings to factory defaults, use a factory default configuration card first, then apply the new configuration with the provided reader configuration card. 2 Keys Specify HID Elite “E” or Standard-1/Standard-2 ”0” based upon keys ALREADY LOADED in the reader that needs to be configured. 3 HID Elite Upgrade and Downgrade Cards Reader admin keys and reader credential keys must both be changed to upgrade or downgrade to or from Elite. A separate card is required for reader admin keys and reader credential keys. A Reader Configuration Card with specific configuration extension SEC9X0/E-XXXX or SEC9X-0/E-XXX(0, 1, 2, 3) is also be required to modify configuration options other than Elite keys, for example modification of125 kHz or 13.56 MHz interpreters. 4 Keys Specify HID Elite “E” based upon HID Elite keys TO BE LOADED in the reader that needs to be configured. 1

June 2019

Page 23 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Accessories The following provides accessories that can be ordered separately for your iCLASS SE and multiCLASS SE readers. Part Number

Description

Mounting Plates, Spacers, Screws and Accessory Kits MDP-00354

R10 / RP10 (or equivalent sized model) Mini Mullion Reader Mounting Plate, Black

6309-103-01

R15 / RP15 (or equivalent sized model) Mullion Reader Mounting Plate, Black

6403-109-01

R40 / RP40 (or equivalent sized model) Wall Switch Reader Mounting Plate, Black

6094-101-01

RK40 / RPK40 (or equivalent sized model) Wall Switch Keypad Reader Mounting Plate, Black

6132AKB

R10 / RP10 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black

6132AKC

R15 / RP15 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black

6132AKT

R40 / RP40 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black

6132AKU

RK40 / RPK40 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black

6132AKE

R40 / RP40 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Black

6132AK

RK40 / RPK40 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Black

6132AKR

RM40 / RMK40 (or equivalent sized model) Reader Spacer, Angled, Black

6132AKP

RM40 / RMK40 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Black

6715-305-01

R95A Reader, Cover Assembly, Décor, Euro, White

6715-305-04

R95A Reader, Cover Assembly, Décor, Euro, Black

MDP-00038

R95A Reader, Cover Assembly, Décor, Euro, Grey

400-2D71-06

High Security Screw, Spanner

6706-303-03

Pigtail Accessory Kit (includes terminal blocks, screws, and installation guide)

6706-303-04

Terminal Reader Accessory Kit (includes terminal blocks, screws, and installation guide)

MDP-01033

multiCLASS SE Mag Stripe RM40 mounting plate replacement kit

MDP-01034

multiCLASS SE Mag Stripe RMK40 mounting plate replacement kit

MDP-01035

multiCLASS SE Mag Stripe RM40/RMK40 magnetic head replacement kit

6132AKB-M

R10 / RP10 BLE Reader Spacer, 12.7mm (0.5 in), Metallic Insert, Black

6132AKC-M

R15 / RP15 BLE Reader Spacer, 12.7mm (0.5 in), Metallic Insert, Black

6132AKT-M

R40 / RP40 BLE Reader Spacer, 12.7mm (0.5 in), Metallic Insert, Black

6132AKE-M

R40 / RP40 BLE Reader Spacer, 25.4mm (1.0 in), Metallic Insert, Black

6132AKU-M

RK40 / RPK40 BLE Reader Spacer, 12.7mm (0.5 in), Metallic Insert, Black

MME-00118

R10 / RP10 BLE Reader Metallic Insert with Adhesive (order in conjunction with spacer or mounting plate)

MME-00119

R15 / RP15 BLE Reader Metallic Insert with Adhesive (order in conjunction with spacer or mounting plate)

MME-00121

R40 / RP40 BLE Reader Metallic Insert with Adhesive (order in conjunction with spacer or mounting plate)

MME-00122

RK40 / RPK40 BLE Reader Metallic Insert with Adhesive (order in conjunction with spacer or mounting plate)

Page 24 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

IP65 Upgrade Kit For upgrading iCLASS SE Readers to IP65 Ingress Protection in the Field IP65 Kit Description (10) Pieces Per Kit

Part Number

IP65 Gasket Kit, (10) pcs per kit. For use with model R10

IP65GSKT-R10

IP65 Gasket Kit, (10) pcs per kit. For use with model R15

IP65GSKT-R15

IP65 Gasket Kit, (10) pcs per kit. For use with model R40

IP65GSKT-R40

IP65 Gasket Kit, (10) pcs per kit. For use with model RK40

IP65GSKT-RK40

UHF Credential Card Holder For correct placement and attachment of UHF Credentials to inside of car windshield

Part Number

Windshield Mount, suction cup, adhesive for ID 1 style credential, Blue (Qty 10)

WSHLDMT-BLU

Windshield Mount, suction cup, adhesive for ID 1 style credential, Clear (Qty 10)

WSHLDMT-CLR

Windshield Mount, suction cup, adhesive for ID 1 style credential, White (Qty 10)

WSHLDMT-WHT

Windshield Mount, suction cup, adhesive for ID 1 style credential, Blue (Qty 250)

WSHLDMT-BLU-BULK

Windshield Mount, suction cup, adhesive for ID 1 style credential, Clear (Qty 250)

WSHLDMT-CLR-BULK

Windshield Mount, suction cup, adhesive for ID 1 style credential, White (Qty 250)

WSHLDMT-WHT-BULK

Suction Cups for WSHLDMT - Kit contains (200) cups

WSHLDMT-CUPS

Double sided tape for WSHLDMT - Kit contains (200) pieces

WSHLDMT-TAPE

iCLASS SE and multiCLASS SE Bluetooth and OSDP Upgrade Kit For upgrading select iCLASS SE and multiCLASS SE Reader models to support Bluetooth and/or OSDP For detailed reader compatibility requirements, see https://www.hidglobal.com/reader-manager-system-requirements

Part Number

Reader Module and Metalic Backplate Sticker to upgrade 1 Reader. For use with iCLASS SE Reader model R10 or RP10

BLEOSDP-UPG-A-900

Reader Module and Metalic Backplate Sticker to upgrade 1 Reader. For use with iCLASS SE Reader model R15 or RP15

BLEOSDP-UPG-A-910

Reader Module and Metalic Backplate Sticker to upgrade 1 Reader. For use with iCLASS SE Reader model R40 or RP40

BLEOSDP-UPG-A-920

Reader Module and Metalic Backplate Sticker to upgrade 1 Reader. For use with iCLASS SE Reader model RK40 or RPK40

BLEOSDP-UPG-A-921

June 2019

Page 25 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

EDGE® Reader - EDGE EVO Solo EDGE EVO® Solo Model and Description

Image

Base Part Rev Color

Hardware Configuration

Additional Configuration

ESH400-K Standard Controller

Single door, IP-based controller for single-door solo-based system. Single physical package. Door inputs/outputs are 4 external inputs, 2 outputs; on-board optical tamper (standard mount). One Wiegand / Clock-and-Data reader interface. For use indoor or outside in weatherproof enclosure. US single-gang, US double-gang or EU/APAC 60mm mount.

83000

C

K = Black

E = Externally-mounted reader

K = Black

I = Integrated controller / reader, 000 = LED normally Red, with segregated module Flash Green and beep on (separate physically installed card read device) containing discrete IO

K=Black

L = Integrated controller / reader, with segregated module (separate physically installed device) containing single discrete lock output

ESHR40-K Standard Controller / Reader and Module

Single door, IP-based controller with integrated R40 iCLASS reader for single-door solobased system. Two physical packages; IP-based reader for mount at access point and “Door Module” with interface to 4 external inputs, 2 outputs; optical tamper. Second reader possible an additional IO interface module (EWM-M or EDWM-M). For indoor use. Door Module mounted in secure location. US Single-gang or EU/APAC 60mm mount.

83120

C

ESHR40-L Single-Output Controller / Reader and Module

Single door, IP-based controller with integrated R40 iCLASS reader for single-door solobased system. Two physical packages; IP-based reader for mount at access point and “Lock Module” with interface single (1) lock output. For indoor use. Door Module mounted behind reader in US Single-gang box, in hollow door frame or other secure location. Reader is US Single-gang or EU/APAC 60mm mount.

83120

C

ESHRP40-K Standard Controller / Reader and Module

Single door, IP-based controller with integrated RP40 multiCLASS® reader for singledoor solo-based system. Two physical packages; IP-based reader for mount at access point and “Door /Wiegand Module” with interface to 4 external inputs, 2 outputs and one Wiegand / Clock-and-Data reader interface; Second reader possible using Wiegand reader. Optical tamper (standard mount). For indoor use. Door / Wiegand Module mounted in secure location. US Single-gang or EU/APAC 60mm mount.

83125

C

K = Black

I = Integrated controller / reader, with segregated module 000 = LED normally Red, (separate physically installed Flash Green and beep on device) containing discrete IO card read and Wiegand reader interface for second reader

83360

A

K = Black

M = Mountable on US singlegang, EU / APAC 60mm electrical box

EWM-M Wiegand Module

The “Wiegand Module” enables controller interface to one (1) Wiegand / Clock-and-Data reader interface. For use indoor or outside in weatherproof enclosure.

000 = LED normally Red, Flash Green and beep on card read

For custom Indala Prox support, add a “-D” to the end of the EHR40-K, EHR40-L or EHRP40-K part number, and specify the Indala format to be programmed into the reader.

Page 26 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Reader Accessories Part No.

Description

iCLASS Reader Accessories 6303-104-01

Mini-Mullion Reader Mounting Plate for iCLASS SE R10, RP10 and iCLASS RW100

6309-103-01

Mullion Reader Mounting Plate for iCLASS SE R15 and RP15

6402-103-01

EU/Asian Reader Mounting Plate for iCLASS RW300

6403-109-01

Wall Switch Reader Mounting Plate for iCLASS SE R40, RP40 and iCLASS RW400

6094-101-01

Wall Switch Keypad Reader Mounting Plate for iCLASS SE RK40, RPK40 and iCLASS RWK400

6132AKB

Mini-Mullion Reader Spacer for iCLASS SE R10, RP10 and iCLASS RW100, Black

6132AKC

Mullion Reader Spacer for iCLASS SE R15, RP15, Black

6132AKD

EU/Asian Reader Spacer for iCLASS RW300, Black

6132AKE

iCLASS Wall Switch Reader Spacer, Black (works with R40, RP40, RW400)

6132AK

iCLASS Wall Switch Keypad Reader Spacer, Black (works with RK40, RPK40, RWK400)

400-2D71-06

iCLASS reader security screw (Qty 1)

June 2019

Page 27 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

HID Proximity Readers ProxPoint Plus Proximity Reader - 6005 / 6008 Card Reader Description

ProxPoint® Plus Proximity Reader with Wiegand output with Clock and Data output

Base Part No.

6005 6008

Current Rev. No.*

B B

Color Options

Hardware Options

Configuration Setting Options¹

Custom²

G = Classic Charcoal Gray B = Classic Beige W = Classic White K = Classic Black 1 = Designer Black 2 = Designer Charcoal Gray 4 = Designer Wave Blue 5 = Designer White

B = Pigtail (18 inches/45.7 cm) L = Long Pigtail (9 feet/3 meters)3

00 01 02 03

XXXX Y

04 05 06 07

*Revision numbers and availability are subject to change without notice. Notes: 1 Configuration Setting Options are as follows (factory programmed): 00 = Beep on, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 01 = Beep off, LED normally red, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 02 = Beep on, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 03 = Beep off, LED normally off, reader flashes green on tag read 07 = Beep off, LED normally off, host must flash red and/or green 2 Consult Factory 3 An optional 9 foot pigtail is available through our HID European office and can also be available in the Americas and Asia Pacific regions via special order of 2,500 unit minimum order quantity. Call the HID factory for pricing and lead-times.

To order, specify the following: Card Reader Description

Page 28 of 109

Base Part No.

Current Rev. No.*

Color Options

Hardware Options

Configuration Setting Options

Custom

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

MiniProx Proximity Reader - 5365 / 5368 Card Reader Description

MiniProx® Proximity Reader with Wiegand output with Clock and Data output

Base Part No.

5365 5368

Current Rev. No.*

E E

Color Options G = Classic Charcoal Gray B = Classic Beige W = Classic White K = Classic Black 1 = Designer Black 2 = Designer Charcoal Gray 4 = Designer Wave Blue 5 = Designer White

Hardware Options

P = Pigtail (18 inches/45.7 cm) T = Terminal Strip H = Hazardous back box³

Configuration Setting Options¹

Custom²

00 01 02 03

XXXX Y

04 05 06 07

*Revision numbers and availability are subject to change without notice. Notes: 1 Configuration Setting Options are as follows (factory programmed): 00 = Beep on, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 01 = Beep off, LED normally red, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 02 = Beep on, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 03 = Beep off, LED normally off, reader flashes green on tag read 07 = Beep off, LED normally off, host must flash red and/or green 2 Consult Factory 3 The hazardous back box option MiniProx is available in gray Terminal Strip only.

To order, specify the following: Card Reader Description

June 2019

Base Part No.

Current Rev. No.*

Color Options

Hardware Options

Configuration Setting Options

Custom

Page 29 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

ProxPro Family Proximity Reader - 5455 / 5458 / 5355 / 5352 / 5358 ProxPro Family Card Reader Description

Base Part No.

ProxPro II Proximity Reader with Wiegand output with Clock & Data Output

5455 5458

ProxPro Proximity Reader5,6 with Wiegand output with Clock & Data Output

Current Rev. No.*

Color Options

B

G = Charcoal Gray B = Beige W = White K = Black

5355 5358 A

ProxPro Proximity Reader with Serial output7

G = Charcoal Gray B = Beige

Hardware Options

Configuration Setting Options¹

Custom²

N = No Keypad, Pigtail (18 inches/45.7 cm)

00 01 02 03

04 05 06 07

XXXX Y

00 10 14 20

09 11 19 21 23

XXXX Y

00 10 14 20

09 11 19 21 23

N = No Keypad, Terminal Strip K = Keypad3, Terminal Strip S = Keypad4, Terminal Strip

5352

*Revision numbers and availability are subject to change without notice. 1 ProxPro II Configuration Setting Options are as follows (factory programmed): 00 = Beep on, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 01 = Beep off, LED normally red, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 02 = Beep on, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 03 = Beep off, LED normally off, reader flashes green on tag read 07 = Beep off, LED normally off, host must flash red and/or green 2 Consult Factory 3 ProxPro Reader with Keypad (Hardware Option K Version): data is outputted over shared Wiegand cable. Reader processes keystrokes. 4 ProxPro Reader with Keypad (Hardware Option S Version): (3 x 4 Matrix) requires additional 7 conductor keypad cable. Control panel processes keystrokes 5 ProxPro Configuration Setting options are as follows (factory programmed): 00 = Buffer one key, no parity, 4 bit message 14 = Buffer one to five keys (Standard 26 bit output) 09 = Buffer one key, add compliment, 8 bit message (Dorado) 19 = Buffer four keys and add parity 10 = Buffer six keys and add parity 20 = Single Key buffering 11 = Buffer one key and add parity 21 = Supervision Mode 23 = Buffer one to 11 keys 6 ProxPro reader Configuration Settings are selected by the customer via dip switch settings. 00 = LED normally red, reader flashes green on tag reads. 7 ProxPro Serial output reads cards with up to 37-bit formats, and outputs RS232, RS422, and RS485.

Optional Glass Mount Kit for ProxPro and ProxPro II Readers = 5455AGM00. To order specify the following: Card Reader Description

Page 30 of 109

Base Part No.

Current Rev. No.*

Color Options

Hardware Options

Configuration Setting Options

Custom

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

ThinLine II Proximity Reader - 5395 / 5398 Card Reader Description

ThinLine II® Proximity Reader with Wiegand output with Clock and Data output

Base Part No.

5395 5398

Current Rev. No.*

Color Options

G = Classic Charcoal Gray B = Classic Beige W = Classic White K = Classic Black 1 = Designer Black 2 = Designer Charcoal Gray 4 = Designer Wave Blue 5 = Designer White

C

Hardware Options

1 = Pigtail (18 inches/45.7 cm)

Configuration Setting Options¹

00 01 02 03

04 05 06 07

Custom²

XXXX Y

*Revision numbers and availability are subject to change without notice. Notes: 1 Configuration Setting Options are as follows (factory programmed): 00 = Beep on, LED normally red, reader flashes green on tag read 01 = Beep off, LED normally red, reader flashes green on tag read 02 = Beep on, LED normally off, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 2 Consult Factory

04 = Beep on, LED normally red, host must flash green 05 = Beep off, LED normally red, host must flash green 06 = Beep on, LED normally off, host must flash red and/or green 07 = Beep off, LED normally off, host must flash red and/or green

To order specify the following: Card Reader Description

June 2019

Base Part No.

Current Rev. No.*

Color Options

Hardware Options

Configuration Setting Options

Custom

Page 31 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

MaxiProx Proximity Reader - 5375 Card Reader Description

MaxiProx® Proximity Reader

Base Part No.

5375

Current Rev. No.*

A

Color Options

Hardware Options

G = Charcoal Gray

N = None

Configuration Setting Options¹

00

Custom²

XXXX Y

*Revision numbers and availability are subject to change without notice. Notes: 1 Configuration Setting 00 = LED normally red, reader flashes green on tag reads. The MaxiProx reader configuration settings are selected by the customer via internal dip switch settings. 2 Consult Factory

To order specify the following: Card Reader Description

Page 32 of 109

Base Part No.

Current Rev. No.*

Color Options

Hardware Options

Configuration Setting Options

Custom

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

EntryProx Proximity Reader - 4045 Card Reader Description EntryProx™ Proximity Reader Stand-Alone Access Control Unit

Base Part No. 4045

Current Rev. No.* C

Color Options

Hardware Options

G = Charcoal Gray

N = None

Configuration Setting Options¹ U0

Custom²

XXXX Y

*Revision numbers and availability are subject to change without notice. Notes: 1 Configuration Setting U0 = LED normally red, reader flashes green on tag reads. 2 Consult

Factory

To order specify the following: Card Reader Description

June 2019

Base Part No.

Current Rev. No.*

Color Options

Hardware Options

Configuration Setting Options

Custom

Page 33 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

HID Proximity Reader Accessories Part No.

Description

ProxPro Family 5455AGM00

Glass Mount Kit, ProxPro and ProxPro II Readers

5350-113-01

Bezel, ProxPro Reader with Keypad (Rev. A) - Charcoal Gray

5350-113-02

Bezel, ProxPro Reader (Rev. A) - Charcoal Gray

5350-113-03

Bezel, ProxPro Reader with Keypad (Rev. A) - Beige

5350-113-04

Bezel, ProxPro Reader (Rev. A) - Beige

5355A-302-01

Cover, ProxPro w/Keypad Reader (Rev. A) - Charcoal Gray

5355A-302-02

Cover, ProxPro Reader (Rev. A) - Charcoal Gray

5355A-302-03

Cover, ProxPro w/Keypad Reader (Rev. A) - Beige

5355A-302-04

Cover, ProxPro Reader (Rev. A) - Beige

5350-101-01

Base, ProxPro Reader (Rev. A) - Charcoal Gray

5350-101-02

Base, ProxPro Reader (Rev. A) - Beige

5355A-306-01

ProxPro Keypad assembly upgrade, K Version, (Rev. A) - Gray Cover only

5355A-306-02

ProxPro Keypad assembly upgrade, K Version, (Rev. A) - Beige Cover only

5355A-306-03

ProxPro Keypad assembly upgrade, S Version, (Rev. A) - Gray Cover only

5355A-306-04

ProxPro Keypad assembly upgrade, S Version, (Rev. A) - Beige Cover only

5355A-306-05

ProxPro Keypad assembly upgrade, K Version, (Rev. A) - Gray Cover and Bezel

5355A-306-06

ProxPro Keypad assembly upgrade, K Version, (Rev. A) - Beige Cover and Bezel

5355A-306-07

ProxPro Keypad assembly upgrade, S Version, (Rev. A) - Gray Cover and Bezel

5355A-306-08

ProxPro Keypad assembly upgrade, S Version, (Rev. A) - Beige Cover and Bezel

5455-311-01

Cover, ProxPro II Reader (Rev. B) - Charcoal Gray (No Bezel Required)

5455-311-02

Cover, ProxPro II Reader (Rev. B) - Beige (No Bezel Required)

5455-311-03

Cover, ProxPro II Reader (Rev. B) - Black (No Bezel Required)

5455-311-04

Cover, ProxPro II Reader (Rev. B) - White (No Bezel Required)

30-0003-01

Rubber Keypad Cover, ProxPro Reader (Rev. A)

137-0005-11

Connector Feed Back Nut and Washer, ProxPro Reader (Rev. A)

MiniProx 5365-371-01

Classic cover, MiniProx Reader (Rev. E) - Charcoal Gray

5365-371-02

Classic cover, MiniProx Reader (Rev. E) - Beige

5365-371-03

Classic cover, MiniProx Reader (Rev. E) - Black

5365-371-04

Classic cover, MiniProx Reader (Rev. E) - White

New Look

1

5365-372-01

Designer cover, MiniProx Reader (Rev. E) - Black

5365-372-02

Designer cover, MiniProx Reader (Rev. E) - Charcoal Gray

5365-372-04

Designer cover, MiniProx Reader (Rev. E) - Wave Blue

5365-372-05

Designer cover, MiniProx Reader (Rev. E) - White

ThinLine II 5395-104-01

Classic cover, ThinLine II Reader (Rev. C) - White

5395-104-02

Classic cover, ThinLine II Reader (Rev. C) - Beige

5395-104-03

Classic cover, ThinLine II Reader (Rev. C) - Black

Page 34 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Part No.

Description

5395-104-04 New Look

Classic cover, ThinLine II Reader (Rev. C) - Charcoal Gray

2

5395-371-01

Designer cover, ThinLine II Reader (Rev. C) - Black

5395-371-02

Designer cover, ThinLine II Reader (Rev. C) - Charcoal Gray

5395-371-04

Designer cover, ThinLine II Reader (Rev. C) - Wave Blue

5395-371-05

Designer cover, ThinLine II Reader (Rev. C) - White

MaxiProx 5370A-305-01

Cover, MaxiProx Reader (Rev. A) - Gray

5375-303-01

Accessory Kit, MaxiProx Reader (Old wiring Diagram) (Rev. A)

5375-313-01

Accessory Kit, MaxiProx Reader (New wiring Diagram) (Rev. A)

56-0002-01

MaxiProx Reader Rubber Gasket (Rev. A)

ProxPoint Plus 6005-111-01

Classic cover, ProxPoint Plus Reader (Rev. B) - White

6005-111-02

Classic cover, ProxPoint Plus Reader (Rev. B) - Beige

6005-111-03

Classic cover, ProxPoint Plus Reader (Rev. B) - Black

6005-111-04

Classic cover, ProxPoint Plus Reader (Rev. B) - Charcoal Gray

New Look 3 6005-312-01

Designer cover, ProxPoint Plus Reader (Rev. B) - Black

6005-312-02

Designer cover, ProxPoint Plus Reader (Rev. B) - Charcoal Gray

6005-312-04

Designer cover, ProxPoint Plus Reader (Rev. B) - Wave Blue

6005-312-05

Designer cover, ProxPoint Plus Reader (Rev. B) - White

Other 4045-390-03

EntryProx Spare Parts Accessories Kit

4045-303-01

EntryProx Reader Replacement Antenna

6020-302-01

Accessory Kit, HSM

33-0001-01

RELAY, 1.00A-24VDC , SPDT-1 FO

57-0001-02

Key Ring for ProxKey (Keyfob)

1

MiniProx Covers will only fit MiniProx readers with removable covers series (Model # 5365E or later), and will NOT fit older versions with electronics potted into the cover (Model #s 5365A, 5365B, nor 5365C).

2

Thinline II Designer Covers will only fit Thinline II readers (Model # 5395C or later), and will NOT fit Thinline II readers (Model #s 5395A nor 5395B).

3

ProxPoint Plus Designer Covers will fit all ProxPoint Plus readers (Model # 6005B or later), and will NOT fit ProxPoint readers (Model # 6005A).

June 2019

Page 35 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Indala Proximity Readers Overview Every part number consists of a base model number to indicate the type of product, and a letter or number to indicate each product option. Each product has a standard part number that includes default options, as indicated on the order guide. When an order is placed for a product, the base model number and all options must be specified. If you require any options that are different from the default options, you must also indicate those options at the time the order is placed. All part numbers must be complete to be accepted by HID’s order entry system. All reader orders must have the following information: 

BASE MODEL NUMBER



STYLE



READ RANGE



TYPE



COLOR



OUTPUT FORMAT (reader’s format or format number must also be given at time of order)

Advantage Series Reader - ASR 620 Part Number

Description

ASR-620++

Long Range Reader

ASR-620++/L

Long Range Reader

Page 36 of 109

Notes

w/10 foot (3 meter) cable

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

FlexPass™ Reader - FP Arch / Keypad FP

3 5 1 1 A /L

BASE NUMBER STYLE READ RANGE TYPE COLOR OUTPUT FORMAT CABLE LENGTH BASE NUMBER FP = FlexPass (reader format required) STYLE 3 = Arch 5 = Keypad 0 = Core Electronics Module READ RANGE 5 = 5 in. (13 cm.) - available in STYLES: Arch, TYPES: Slim and Wall switch 2 = 12 in. (30 cm.) - available in STYLES: Arch TYPE: Midrange 0 = 4 in. (10 cm.) - available only in STYLE: Keypad; TYPE: Keypad TYPE 1 = Slim - available in STYLES: Arch 2 = Wall switch - available in STYLES: Arch 3 = Midrange - available in STYLES: Arch 6 = Membrane Keypad - available only in STYLE: Keypad 0 = Module only COLOR 1 = Black - available in STYLES: Arch TYPES: Slim, Wall switch, Midrange, Classic 0 = N/A OUTPUT FORMAT Note: Aside from choosing below, specify reader’s format or format no. (e.g. 26-bit Wiegand or format no. 10022). A = Standard Wiegand - available in all STYLES and TYPES S = Serial - available in STYLES: Arch TYPE: Midrange B = Buffered or 8-Bit Burst (must be specified) - available only in Keypad STYLE and TYPE (Membrane or Heavy Duty) M = 3 X 4 Matrix CABLE LENGTH The default cable length for Indala modules is 18 inches (46 cm). No entry is needed for an 18 inch cable. For Reader Cores an optional 10 ft (3 m) pigtail is available through the HID European, America and Asia Pacific offices. Requires a minimum 2,500 unit order quantity. Place /L in the 7th position for ordering the 10 ft (3 m) cable. Note: Do not order Reader Packages with the 10 ft (3 m) cable. When ordering the 10 ft (3 m) cable, bezels must be ordered separately. Call Customer Service for assistance.

June 2019

Page 37 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

FlexPass Accessories Part Number

Description

21211-001 21212-001 FPZ1231A FPZ1234A FPZ1511A FPZ1514A FPZ1521A FPZ1524A FPZ2511A FPZ2521A FPZ3231A FPZ3235A FPZ3236A FPZ3237A FPZ3511A FPZ3515A FPZ3516A FPZ3517A FPZ3521A FPZ3521H FPZ3525A FPZ3526A FPZ3527A FPZ3527H FPZ4511A FPZ-4511A FPZ4517A FPZ4521A FPZ4525A FPZ4526A FPZ4527A FPZ4551A FPZC1511H FPZC1514H FPZC1524H XXZ112 XXZ122 XXZ321 SH-003

Enclosure Base, ASR-620 Enclosure Cover, ASR-620++ Bezel Wave Style, Midrange Type, Black Bezel Wave Style, Midrange Type, Blue Bezel Wave Style, Slim Type, Black Bezel Wave Style, Slim Type, Blue Bezel Wave Style, Wallswitch Type, Black Bezel Wave Style, Wallswitch Type, Blue Bezel Curve Style, Slim Type, Black Bezel Curve Style, Wallswitch Type, Black Bezel Arch Style, Midrange Type, Black Bezel Arch Style, Midrange Type, Grey Bezel Arch Style, Midrange Type, White Bezel Arch Style, Midrange Type, Beige Bezel Arch Style, Slim Type, Black Bezel Arch Style, Slim Type, Grey Bezel Arch Style, Slim Type, White Bezel Arch Style, Slim Type, Beige Bezel Arch Style, Wallswitch Type, Black Bezel Arch Style, Wallswitch Type, Black (HID) Bezel Arch Style, Wallswitch Type, Grey Bezel Arch Style, Wallswitch Type, White Bezel Arch Style, Wallswitch Type, Beige Bezel Arch Style, Wallswitch Type, Beige (HID) Bezel Linear Style, Slim Type, Black Bezel Linear Slim Black Cover Bezel Linear Style, Slim Type, Beige Bezel Linear Style, Wallswitch Type, Black Bezel Linear Style, Wallswitch Type, Grey Bezel Linear Style, Wallswitch Type, White Bezel Linear Style, Wallswitch Type, Beige Bezel Linear Style, Slim Type, Black Bezel, HID, Wave, Slim,5, Black Bezel, HID, Wave, Slim, 5, Blue Bezel, HID, Wave, Wallswitch, 5, Blue Bezel, Wave, Slim, 5, Blue Bezel, Wave, W/S, 5, Blue Bezel, Arch, W/S, Black Indala Credentials Special Handling, New marking label codes

Page 38 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

HID MOBILE ACCESS What Is HID Mobile Access? HID Mobile Access complements any access control solution by enabling building occupants to securely access the facility using Android and iOS mobile devices. HID Mobile Access, powered by Seos, consists of the following components: 

HID Origo Management Portal: A cloud-hosted management portal that allows administrators to manage users, devices, and securely issue/revoke Mobile IDs.



HID Mobile Access App: Easily downloaded on Google Play and Apple App Store and proven compatibility with the most popular mobile phones, tablets, and wearables.



Mobile IDs: Powered by Seos credential technology, Mobile IDs are the virtual equivalent of the traditional contactless smart card.



iCLASS SE and multiCLASS SE Readers: These flexible readers can be configured to securely authenticate with an organization’s Mobile ID’s via Bluetooth Smart and/or NFC communication standards.

Creating HID Mobile Access User Account In order to use HID Mobile Access, an account in the HID Origo Management Portal is required. Once an end-user account has been created, the organization will be able to order products from its Access Control Provider and issue Mobile IDs to its building occupants.

To set up an end-user account please go to https://managedservices.hidglobal.com/faces/maUserOnBoardingStart After user account creation, the administrator will be given organization-specific identifiers required for ordering and for secure portal access:

Reference

Description

Mobile Keyset (MOB or ICE)

Mobile Keyset is a reference number for a set of cryptographic keys loaded into a reader. Mobile IDs, Mobile Key cards, and Mobile Admin cards will securely authenticate only with readers programmed with a matching keyset. An organization is assigned a Mobile Keyset upon registration into either the HID Elite™ (ICE) or HID Mobile Access (MOB) programs. The correct Mobile Keyset must be supplied when ordering mobile-enabled readers, Mobile IDs, subscription user licenses, Mobile Key cards, and Mobile Admin cards.

Organization ID

Organization ID is a reference number for a unique account within the HID Origo Management Portal. It is assigned at the conclusion of account registration. The correct Organization ID must be supplied when ordering Mobile IDs, subscription user licenses, and Mobile Admin cards.

June 2019

Page 39 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Ordering Information – Readers for HID Mobile Access Component

Details

Part Number

Supplemental Information Needed for Order

Mobile-Ready Readers

Mobile-Ready readers are prepared to support HID Mobile Access but lack the personalized configuration (Mobile Keyset) to read an organization’s specific Mobile ID’s. These readers can be ordered at any time but will require field activation after the organization has completed registration for HID Mobile Access. To support a specific organization’s Mobile IDs, these readers need to be personalized (Mobile Keyset loaded) using a Mobile Key Card or HID Reader Manager mobile application..

See iCLASS SE Readers section of the HTOG

Mobile-Enabled Readers

Mobile-Enabled readers are fully activated and personalized to support an organization’s specific Mobile ID’s. These readers can only be ordered after the organization has completed registration for HID Mobile Access or HID Elite program. MOB or ICE Mobile Keyset will be required at time of order.

See iCLASS SE Readers. section of the HTOG

MOB or ICE: Org Name:

_______ _______

Mobile Key Card

Configuration card used to personalize and activate a Mobile-Ready reader; converting it to a Mobile-Enabled reader.

SEC9X-CRD-E-MKYD

MOB or ICE: Org Name:

_______ _______

Configuration card which enables the use of the BLE Config App used to adjust Bluetooth range settings on Mobile-Enabled Readers.

MOB or ICE:

_______

Mobile Admin Card

Org Name:

_______

Org ID:

_______

Page 40 of 109

SEC9X-CRD-MADD

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Ordering Information – Mobile Identities Service New HID Mobile Access customers have two options for how to order and pay for the service, user licenses on the new HID Origo Management Portal or Mobile IDs on the legacy Secure Identity Services Portal. Most customers will see lower, more predictable costs and better performance on the user license option. Customers on the legacy platform will have the opportunity to transfer to the new platform in 2019. Natively tracked formats (e.g. Corporate 1000) are strongly recommended. Since HID will automatically generate and replenish Mobile IDs, the user license subscription model requires a tracked credential format – a format in which HID tracks the credential number to ensure no duplicates are ever created. To guarantee no collision with credential numbers on tradional cards, the same format should be used for both Mobile IDs and cards.

Option 1 (Preferred): User License Subscription Component

Details

User Licenses – Initial

User Licenses – Renewal

Part Number

When starting a subscription for HID Origo Mobile Identities, an order for User Licenses must be placed. The service start date begins on the date the order is processed by HID. User Licenses will be valid for one year. Unlimited Mobile IDs will be automatically supplied to, and replenished in, the HID Origo Mobile Identities service as long as the subscription is active and in good standing.

MID-SUB-T100

When renewing a subscription for HID Origo Mobile Identities service, an order for User Licenses must be placed.

MID-SUB-T100

Supplemental Information Needed for Order

Org ID:

_______

Org Name:

_______

MOB or ICE:

_______

Format*:

_______

Org ID:

_______

Org Name:

_______

Contract ID: To increase the number of User Licenses within a service term, an order for Add-on licenses must be placed. These user licenses will have a prorated price based on time remaining in term. They will coterminate and expire along with previously purchased licenses on the contract.

User Licenses – Add-on

Additional Credential Types

If, after initial onboarding account creation, a new credential type is needed (new format and/or keyset), an order must be placed. Quantity should always be 1. There is no charge for this transaction as unlimited credentials are included with subscription user licenses.

MID-SUB-T100-ADD

MID-SUB-CRD

______–RENEWAL

Org ID:

_______

Org Name:

_______

Contact ID:

_______

Org ID:

_______

Org Name:

_______

MOB or ICE:

_______

Format*:

_______

Option 2: Mobile ID Credential Component

Mobile IDs

Details Mobile IDs are virtual credentials electronically delivered to the Secure Identity Services Portal account linked to the Organization ID. Mobile Keyset assures that Mobile ID’s will work with the corresponding iCLASS SE readers.

Part Number

MOBILE-ID or MOBILE-ID-TEMP7 (temporary 7-day validity)

Supplemental Information Needed for Order Org ID:

_______

Org Name:

_______

MOB or ICE:

_______

Format*:

_______

The following applies only to customers that have been issued customer specific part numbers Mobile IDs

CRD633ZZ-xxxxx (xxxxx specific to organization and issued at time of part number creation).

Format:

_______

* Some formats will require additional information with the order.

June 2019

Page 41 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

CREDENTIALS Understanding HID Credentials Can I configure my credential product online? Yes, HID Global is now offering the HID Global Product Configurator. This online tool will guide customers and partners toward the most suitable product for their needs. There are two main features available with this tool: 

Find by part number - allows customers to enter an existing part number to see the specification of this credential.



Build a credential - helps customers construct a complete part number, including keyset and formatting information; everything needed to place an order. Customers will be able to download a PDF with all specifications of the credential they build to allow for a smooth ordering process.

HID Global Product Configurator: https://www.hidglobal.com/configure

What should I know about security keysets? iCLASS SE readers and iCLASS Seos / iCLASS SE credentials offer two keyset security schemes, HID Elite and Standard. The HID Elite Security Program supports a unique keyset on a per site/company basis. The keyset governs a variety of keys, including: 

Media (credential) keys for iCLASS SE, SIO-encoded iCLASS, MIFARE Classic (SIO) and MIFARE DESFire EV1 (SIO) credentials



SIO authenticity and privacy keys (media independent)



Admin/configuration programming keys (for programming reader configuration, also media independent)

When utilizing HID’s standard key set for the above keys, all standard keyed credentials work with all standard keyed readers. Additionally, any Standard Security configuration card configures a Standard Security reader (only accomplished during the first five (5) seconds after reader powers-up). Conversely, when utilizing the HID Elite program, only site/company specific HID Elite credentials and configuration cards work with matching readers. The Standard Security Program provides universal keysets that offer maximized compatibility by keying readers and cards with matching security for use in the general population. This allows for maximized compatibility because readers and cards are not keyed on a per site/company basis but rather all keyed the same. This offers the advantage to the integrator as a standard stock of readers and cards will interoperate for a variety of sites/companies, rather than needing different stocks of readers and cards for each individual site. iCLASS SE readers provide two Standard Security Keysets that offer compatibility with the following credentials: Standard Security Keyset

Compatibility with these Credentials

Version 1

iCLASS Seos (+ Prox) iCLASS SE (+ Prox) iCLASS SIO encoded (+ Prox) iCLASS (+ Prox) MIFARE Classic (+ Prox) MIFARE DESFire EV1 (+ Prox)

Version 2

iCLASS Seos (+ Prox) iCLASS SE (+ Prox) MIFARE Classic (+ Prox) MIFARE DESFire EV1 (+ Prox)

How can I order HID Elite configured credentials? 

Direct customers of HID must be authorized to purchase components with HID Elite keys. If you are not authorized, you must have the key owner authorize you through the Authorization form. See http://www.hidglobal.com/services/secure-identity/credential-programs/iclass-elite-and-se-elite.



Ensure the HID Elite flag is set in the part number (of readers, credentials and configuration cards).



Al Purchase Orders for HID Elite components must be ordered with the HID Elite reference number (starts with ICE or MOB).

Page 42 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

How can I migrate from my current credential technology? 



iCLASS Existing Sites: When deploying credentials to an existing site with standard iCLASS credentials and readers the following steps provide a guideline to a recommended path: 1.

Purchasing iCLASS Seos + iCLASS cards along with iCLASS SE Readers - Standard profile with Maximum compatibility credential support (supporting iCLASS cards), as this provides full interoperability with HID’s latest credential and reader platform, as well as supporting installed iCLASS base.

2.

This provides options to upgrade security in the future without rip-and-replace of the newly purchased readers

3.

Once all readers on site are iCLASS SE the customer can begin ordering iCLASS Seos only cards.

4.

Once all cards in the population are iCLASS Seos, readers can be configured to support only iCLASS Seos cards.

125 kHz Existing Sites: Deploying credentials to an existing 125 kHz site with HID Prox/Indala Proximity credentials and readers (HID, Indala, AWID, and EM4102), purchase multi-technology iCLASS Seos or iCLASS SE Credentials, along with multiCLASS SE Readers for full credential and reader interoperability, and a relaxed migration timeline.

What is the difference between iCLASS Seos, iCLASS SE and iCLASS credentials? iCLASS Seos credentials deliver enhanced security, data confidentiality and stronger authentication for user data. Seos comprises a generic card edge (card command interface) to meet the growing demand for interoperability; a secure messaging protocol to protect data transmission. In addition, Seos provides an open software architecture that is portable to a range of mobile devices and microprocessors. The credential offers enhanced privacy protection by delivering data confidentiality and integrity between the smart card and the reader to prevent sensitive/personal data from being intercepted or cloned. iCLASS Seos credentials are only delivered with a single access control data payload, the SIO, and are not backwards compatible with iCLASS readers. iCLASS SE credentials come with a single access control data payload, the SIO. iCLASS SE credentials are designed to work in an installation of iCLASS SE readers only and are not backwards compatible with iCLASS readers. iCLASS credentials are offered either with or without an encoded SIO. For the SIO encoded option, this card will come with two access control data payloads: the SIO and iCLASS access control data payload. These credentials provide backward compatibility with currently deployed systems, maximizing compatibility. iCLASS credentials encoded with SIO should be purchased when the site needs legacy application support, or when the site plans to eventually migrate to SIO security. iCLASS credentials encoded with SIOs were previously marketed as iCLASS SR credentials. iCLASS credentials are designed to work in an existing installation of standard iCLASS readers. iCLASS credentials are compatible with both iCLASS readers and iCLASS SE readers.* Works with iCLASS SE Readers*

Credential Type

Works with iCLASS Readers

Advantage

iCLASS Seos

Yes

No

Best-in-class security and privacy protection, programmable card, portability, interoperability (standards based) and usability (read range).

iCLASS SE

Yes

No

Increased Security

iCLASS, SIO encoded (Previously called iCLASS SR)

Yes (reading SIO or standard iCLASS access control application)

Yes (Reading standard iCLASS access control application)

Increased Security when reading SIO, maximum compatibility - works with both iCLASS and iCLASS SE readers.

iCLASS, without SIO encoding

Yes

Yes

*Reader support depends on reader model and configuration selected.

June 2019

Page 43 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Credentials Marking For information on Card Identification Markings, please see the "Card Identification Markings Application note", available for download at https://www.hidglobal.com/node/23025

Credential Marking Technology As a part of our commitment to continuous enhancements of world-class products and solutions, HID Global is transitioning to the most innovative card marking technology available. HID Global is moving from ink jet card marking to the new laser engraving card marking technology for all Genuine HID® cards, fobs and authentication tokens. This state-of-the-art laser engraving technology will result in a more appealing look and feel and reduce the ecological footprint of card production. Key benefits: 

Marking quality and durability of the cards will be enhanced and more consistent



New engraving technology reflects HID Global’s commitment to sustainability by eliminating the use of solvents



Improved Proof of Authenticity since engraved markings cannot be removed or modified.



The enhanced design will be available at no additional charge.

Depending on the fulfillment center, customers may receive either inkjet or laser marked credentials during this transition period. Notes: 

The numbering scheme and part number for existing part numbers will not change. Please contact your sales representative to see the new design and get sample cards.



Due to the 3D nature of laser engraved markings, printing over these markings is not recommended as it may impact print quality.

Current Laser Marking Status by Region 

The Americas:

Laser marking transition complete



EMEA:

Transition in progress



APAC Region:

Transition in progress

Understanding Credential Formats The majority of physical access control credentials are programmed with an access control data “format”. The format of the credential is sent to the controller by the reader and must match the format of the access control system. In some cases the format of the credential must also match the format of the reader before an output is sent.

Format Structure Each format differs in structure by; 

Bit length (e.g. 26 bits, 37 bits)



Number of fields (for example, H10301 26-bit has two fields; ID range and facility code)



Field names (for example, facility code, site code, ID range etc.)



Field length (for example H10301 26-bit has a 16-bit ID range and 8-bit facility code)



Parity

Many formats share the same bit length but differ in structure and for this reason it is not possible to determine the required format number from the bit length alone. If an incorrect format is programmed into the card may not operate correctly with the access control system.

Page 44 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

What format do I need? Existing Systems If you are ordering cards for an existing system you must determine the format of the existing cards. The format number can be found in the original HID order acknowledgement information or card packaging. Most credentials are marked with the sales order number (see image below) allowing you to contact your local HID Global customer service team for information. Information relating to OEM/proprietary, end-user or other controlled formats will not be released to unauthorized parties.

HID Sales Order Order Number

New Systems HID Global offers a range of open, tracked, end-user (Corporate 1000) and OEM/proprietary formats. Contact your local sales or presales representative for additional guidance. Corporate 1000 HID Global’s Corporate 1000 Program offers a fully managed end-user controlled solution for RFID card formatting and card number tracking. The Corporate 1000 Program benefits end-users with multiple locations and/or decentralized decision-making for card purchases. This alternative to in-house card production offers a variety of benefits including increased security and management of issuance over multiple purchasers or locations. Key Benefits

o o o

Card and associated data is more secure when programmed with a unique format HID Global’s managed service tracks card number sequences to prevent card number duplication Choose to have one authorized source of supply or many; card numbers will not be duplicated

See: https://www.hidglobal.com/services/secure-identity/credential-programs/corporate-1000

Common Formats HID has many active Corporate 1000, OEM and open formats. A list of common formats are detailed below. Format Number

Description

Additional Fields

Number Range

H10301

Open 26-bit with Facility Code and ID Number

Facility Code (0-255 )

0-65535 (untracked)

H10302

Tracked 37-bit ID Number

N/A

0-34359738368 (tracked)

H10304

Tracked 37-bit with Facility Code & ID Number

Managed Facility Code (0-65535)

H10320

Open ABA 8 digit ID Number

N/A

0-99999999 (untracked)

Starts with “H5”

35-bit Corporate 1000

Fixed Company ID Code

0-1048575 (tracked)

Starts with “H2”

48-bit Corporate 1000

Fixed Company ID Code

0-8388607 (tracked)

Untracked formats require the customer to specify the ID range, for example, H10301 and H10320 require customers to specify the required ID range. Tracked formats allow customers to request the next unused numbers, for example HID Global tracks H10302, H10304 and all Corporate 1000 formats.

June 2019

Page 45 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Format Compatibility HID Global formats for example H10301, H10302 and Corporate 1000 are compatible across multiple credential product lines such as iCLASS Seos, iCLASS SE, CLASS, UHF, HID Prox and Mobile Access. However, some formats are product line specific. Refer to the table below for details.

Indala Formats – Label Code Indala formats may be programmed into traditional HID Prox credentials, however E code markings are not compatible; choose marking options per the selected part number. Request a custom part number to meet specific marking requirements. If a credential is encoded with an Indala format, an Indala compatible reader is required.

Example Format Numbers

Format Type

H10301,H10302, H10304, 35-bit Corporate 1000 & OEM formats

HID

Compatible Credential Product Lines – includes multi-technology credentials containing the listed technology.

Reader Compatibility

HID Prox

HID Prox/MultiCLASS SE

iCLASS, iCLASS SE, iCLASS Seos MIFARE Classic with SIO encoding MIFARE DESFire with SIO encoding

iCLASS SE iCLASS SE iCLASS SE

Mobile Access IDs

Mobile Enabled iCLASS SE

UHF

UHF (U90)

HID ABA

H10320

HID Prox

HID Prox/MultiCLASS SE

Indala Prox 125 kHz

40134, 4038X

Indala Prox, HID Prox

Indala

Indala CX (Casi 125 kHz)

C10106

Indala CX, HID Prox

Legacy Indala Casi CX (discontinued) / third party Casi compatible

EM

EM4102

Custom MIFARE DESfire EV1 or MIFARE Classic

-

Contact your local HID Global pre-sales or sales engineering representative to discuss requirements Contact your local HID Global pre-sales or sales engineering representative to discuss custom format requirements

multiCLASS SE / third party

-

Long Formats (HID Prox) Not all products support HID Prox credentials encoded with formats longer than 37-bits (including Corporate 1000 48-bit). HID Prox Format Type

Example Format Numbers

Compatible HID Prox Product Lines

Incompatible Products

Long Formats (>37-bits)

H2xxxxx 48-bit Corporate 1000, all other formats >37 bits.

6005/6008/5365/5368/5355/5358/5395/5375 (manufactured after 2001)

eProx Lock, Serial ProxPro, EntryProx, ProxPass II

Page 46 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Understanding Credential Programming How do I complete the programming section correctly? For any given credential part number where a programmed option is selected you will need to enter the format number, field names (where applicable) and programming values into the programming section. If ordering a dual or triple technology credential complete the programming section for each technology. Mandatory fields depend on the part number selected.

Mandatory Programming Information    

Format number Format field names HID Elite ICE number HID MOB number

Required for all programmed part numbers Required for formats with additional fields If required to support a matching HID Elite ICE reader If required to support a matching HID Elite MOB reader

Mandatory Marking Information 

Printed number range:

Required for all external matching or non-matching options

Examples Part Number: Quantity: Format: Facility Code: ID number range:

5006PGGAN (programmed iCLASS Seos, matching external marking) 500 H10301 125 25,001 to 25,500

Format Number H10301

Field Name(s) e.g. Facility Code Facility Code

Value 125

Quantity 500

HID Elite ICE number

Part Number: Quantity: Format: Elite Key: Site Code: Installer Code: Number range:

Encoded Start Number 25,001

Encoded Stop Number 25,500

Printed Start Number 25,001

Printed Stop Number 25,500

Encoded Start Number 1,001

Encoded Stop Number 2,000

Printed Start Number

Printed Stop Number

5006PGGNN (programmed iCLASS Seos, no external marking) 1,000 O999123 (Custom OEM format with site code and installer code) ICE999 156 21 1,001 to 2,000

Format Number O999123

Field Name(s) e.g. Facility Code Site Code

Value 156

HID Elite ICE number

Installer Code

21

Quantity 1,000

ICE999

If you have any questions relating to credential technologies, marking, key management, formats or need help to complete your purchase order please contact HID Customer Service or your local sales representative.

June 2019

Page 47 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Seos Credentials Note: See Understanding HID Credentials on page 42 for guidance.

iCLASS Seos Card - 500 Increased security and interoperability cards for installation supporting iCLASS SE platform. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

500 Composite 40% Polyester / PVC*

iCLASS Seos Memory Size and Allocation (Select one option) 5 - 16K Bytes 6 - 8K Bytes6

Secure Identity Object® Programming (Select one option) P - Programmed with Security Identity Object (SIO) V - Unprogrammed, for use with iCLASS SE Encoder

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe Specify Custom Artwork Number1

Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Slot Punch4 (Select one option) N - No Slot Punch Y = Seos Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Packing (Optional) T - Packs of 10 (shrink wrap) in standard box

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)

Enter your final card options from check boxes above. Example: 5005PGGNNT Final Part Number

500

N

-

(Options #)

iCLASS Seos Card Programming Information Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner. 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 4 Cards are not available with any slot punch option. 5 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards. 6 Available with 7 byte static UID for ISO14443A UID migration and interoperability. This feature reduces privacy and is not recommended. Contact your local sales or pre-sales representative for details. 1 2

Page 48 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Seos + iCLASS Card - 522 Migration solution from iCLASS to Seos in iCLASS SE platform. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

522 Composite 40% Polyester / PVC*

iCLASS Seos and Memory Size and Allocation 6 - 8K Bytes6

iCLASS Memory Size and Allocation (Select one option) 0 - iCLASS 2k Bits (256 Bytes) with 2 Application Areas 3 – CLASS 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 – CLASS 32k Bits (4K Bytes) Application areas 16k/16+16k/1

iCLASS Seos Programming (Select one option) P - Programmed with Security Identity Object (SIO) V - Unprogrammed, for use with iCLASS SE Encoder (Must be combined with C option below)

iCLASS Programming (Select one option) S - Programmed with Security Identity Object (SIO) and with standard iCLASS Access Control Application (recommended) P -Programmed with Security Identity Object (SIO) H - Programmed with standard iCLASS Access Control Application C - Unprogrammed, for use with iCLASS SE Encoder (Must be combined with V option above)

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

Y = Seos Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

iCLASS Seos Card Numbering3 (Select one option) N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved)5 B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)5 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)5

iCLASS Card Numbering3 (Select one option) N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved)5 B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)5 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)5

Slot Punch4 N - No Slot Punch

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)

Enter your final card options from check boxes above. Example: 52263PSGGAAN Final Part Number

June 2019

522

6

N

-

(Options #)

Page 49 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Seos Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

iCLASS Card Programming Information Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. 4 Cards are not available with any slot punch option. 5 Inkjetted option is not available for these cards. 6 Available with 7 byte static UID for ISO14443A UID migration and interoperability. This feature reduces privacy and is not recommended. Contact your local sales or pre-sales representative for details. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 1 2

Page 50 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Seos + Prox Card - 510 Migration solution from proximity to high security for support in iCLASS SE platform. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

510 Composite 40% Polyester / PVC*

iCLASS Seos Memory Size and Allocation (Select one option) 5 - 16K Bytes 6 - 8K Bytes6

Programming (Select one option) P - Programmed with Security Identity Object (SIO), HID Prox non programmed R - Both interfaces programmed: iCLASS Seos with Security Identity Object (SIO), 125 kHz programmed with HID or Indala format V – Unprogrammed Seos and HID Prox, for use with iCLASS SE Encoder

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

iCLASS Seos Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Y = Seos Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Slot Punch4 N - No Slot Punch

125 kHz Card Numbering3 (Select one option M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5

A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)

Enter your final card options from check boxes above. Example: 5105PGGNNN Final Part Number

510

N

-

(Options #)

iCLASS Seos Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

125 kHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. 4 Cards are not available with any slot punch option. 5 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. 6 Available with 7 byte static UID for ISO14443A UID migration and interoperability. This feature reduces privacy and is not recommended. Contact your local sales or pre-sales representative for details. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 1 2

June 2019

Page 51 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Seos + iCLASS + Prox Card - 520 B.6 Migration solution from proximity and/or iCLASS to high security for support in iCLASS SE platform. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

520 Composite 40% Polyester / PVC*

iCLASS Seos Memory Size and Allocation 6 - iCLASS Seos 8K Bytes6

iCLASS Memory Size and Allocation 0 - iCLASS 2k Bits (256 Bytes) with 2 Application Areas 3 – CLASS 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 – CLASS 32k Bits (4K Bytes) Application areas 16k/16+16k/1

iCLASS Seos Programming (Select one option) P - Programmed with Security Identity Object (SIO) V - Unprogrammed, for use with iCLASS SE Encoder (Must be combined with C option below)

iCLASS Programming (Select one option) S - Programmed with Security Identity Object (SIO) and with standard iCLASS Access Control Application (recommended) P -Programmed with Security Identity Object (SIO) H - Programmed with standard iCLASS Access Control Application C - Unprogrammed, for use with iCLASS SE Encoder (Must be combined with V option above)

125 kHz Programming (Select one option) P - Programmed with HID or Indala format N – HID Prox unprogrammed for use with iCLASS SE Encoder

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

Y = Seos Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

iCLASS Seos Card Numbering3 (Select one option) N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved)4 B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4

iCLASS Card Numbering3 (Select one option) N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved)4 B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4

Prox Card Numbering3 (Select one option) N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved)4 B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4

Slot Punch5 N - No Slot Punch

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)

Enter your final card options from check boxes above. Example: 52063PSPGGAAAN Final Part Number

Page 52 of 109

520

6

N

-

(Options #)

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Seos 8K with MIFARE Classic or DESFire EV1 Implementation – 5806/5906 Migration solution from MIFARE Classic 4K or MIFARE DESFire EV1 to Seos 8K in iCLASS SE platform.

Base Model 5806 Composite 40% Polyester / PVC* Seos 8K with MIFARE Classic 4K Implementation Base Model 5906 Composite 40% Polyester / PVC* Seos 8K with MIFARE DESFire EV1 8K Implementation This product requires additional qualification and test activities, please refer to PLT-04003 for full technical details, product compatibility, part numbers and order process.

Y = Seos Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

June 2019

Page 53 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Seos Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

iCLASS Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE number

125 kHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. 4 Inkjetted option is not available for these cards. 5 Cards are not available with any slot punch option. 6 Available with 7 byte static UID for ISO14443A UID migration and interoperability. This feature reduces privacy and is not recommended. Contact your local sales or pre-sales representative for details. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 1 2

Page 54 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Credentials iCLASS SE Card - 300 / 305 Added security into installations that do not contain standard iCLASS readers, these cards are not available with iCLASS programming. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

300 Standard PVC

305 Composite 40% Polyester / PVC*

iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

Secure Identity Object Programming P - Programmed with Security Identity Object (SIO) V - Unprogrammed, for use with iCLASS SE Encoder

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)7 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)7 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)7 A - Sequential Matching Encoded/Printed (Laser Engraved)4 B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4

Slot Punch5 (Select one option) N - No Slot Punch. This card can be slotted vertically, Printed Vertical Slot Indicators6 B - No Slot Punch. This card can be slotted horizontally, Printed Horizontal Slot Indicators6 V - Vertical Slot Punch H - Horizontal Slot Punch 6

Y = iCLASS Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)

Enter your final card options from check boxes above. Example: 3000PGGNN Final Part Number

-

(Options #)

iCLASS Card Programming Information Format # HID Elite ICE number

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. 4 For Laser Engraved Printed numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. 6 The ability to add a horizontal slot punch requires a different iCLASS antenna design. Users can expect a read range reduction of approximately 20% if they order options B or H for the Slot Punch. 7 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 1 2

June 2019

Page 55 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE + Prox Card - 315 Maximized compatibility with added security into installations that contain standard Prox credentials. These cards are not available with iCLASS programming, a composite fee applies to this card. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

315 Composite 40% Polyester / PVC*

iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

Secure Identity Object Programming (Select one option) P - Programmed with Security Identity Object (SIO), 125 kHz HID Prox uprogrammed R - Both interfaces programmed: iCLASS with Security Identity Object (SIO), 125 kHz programmed wth HID or Indala format

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe Specify Custom Artwork Number1

13.56 MHz iCLASS Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)7 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved) Y = iCLASS Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Slot Punch5 (Select one option) N - No Slot Punch. This card can be slotted vertically, Printed Vertical Slot Indicators V - Vertical Slot Punch

125 kHz Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)

Enter your final card options from check boxes above. Example: 3150PGGNNN Final Part Number

-

(Options #)

iCLASS Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

125 kHz Card Programming Information Format Number

Page 56 of 109

Field Name(s) e.g. Facility Code

Value

QTY

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. 4 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. 5 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. 1 2

June 2019

Page 57 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Key - 325 The iCLASS SE contactless smart Key offers read/write capability while leveraging Security Identity Object for increased security. Attach to a key ring or badge clip for convenient use. The iCLASS SE key is not available with iCLASS programming. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

325 Base Model iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

Secure Identity Object Programming (Select one option)

.24 in [6 mm]

P - Programmed with Security identity Object (SIO) V - Unprogrammed, for use with iCLASS SE Encoder

Front Packaging 1. 55 in [39.4 mm]

N - iCLASS Key II - Black with blue insert. Includes HID Standard Artwork

Back Packaging N - None

Key Numbering M - Sequential Matching Encoded/Printed (Inkjetted)4 N - No Printed Key Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4 A - Sequential Matching Encoded/Printed (Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Engraved) C - Random Encoded/Non-Matching Sequential Printed (Engraved)

1. 25 in [31.75 mm]

Shown - Front Packaging Option N

Additional Options3 N - None Enter your final card options from the above selections. Example: 3250PNNMN Final Part Number

325

N

N

N

iCLASS Key Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE number

1 2

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

The Printed key number is placed on the back of the key. Key Ring sold separately (Part Number: 57-0001-02). note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards.

4 Please

Page 58 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Tag - 330 The iCLASS SE contactless smart Tag offers read/write capability while leveraging Security Identity Object for increased security. iCLASS SE enable existing credentials or non-metallic devices such as cell phones or PDAs by adhering the iCLASS Tag. The iCLASS SE Tag is not available with iCLASS programming. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

330 Base Model iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

Secure Identity Object Programming (Select one option) P - Programmed with Secure Identity Object (SIO). V - Unprogrammed, for use with iCLASS SE Encoder

Front Packaging (Select one option) K - Black with HID Standard Artwork C - Custom Artwork - Specify Custom Artwork Number2

Back Packaging S - Adhesive Backing

Tag Numbering1(Select one option) Front Packaging

M - Sequential Matching Encoded/Printed (Inkjetted)4 N - No Printed Tag Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4

Slot Punch N - None

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final Tag options from check boxes above. Example: 3302PSSNN Final Part Number

330

S

N

-

(Options #)

iCLASS Tag Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

HID Elite ICE/MOB #

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

The Printed tag number is placed on the back of the tag. For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost. 3 The iCLASS Tag is not for use on cards that use full insertion or tractor feed type readers. 4 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. 1 2

Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does not claim that the iCLASS Tag will work in every situation. Functional and non-functional iCLASS Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering.

June 2019

Page 59 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Clamshell Card - 335 Added security into installations that do not contain standard iCLASS readers, these cards are not available with iCLASS programming. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

335 Base Model imageiCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas

Secure Identity Object Programming (Select one option) P - Programmed with Security Identity Object (SIO) V - Unprogrammed, for use with iCLASS SE Encoder

Front Packaging (Select one option) M - Plain White Vinyl with Matte Finish G - Plain White with Gloss Finish C - Custom Artwork - Specify Custom Artwork Number1

Back Packaging (Select one option) S - Base with Molded HID Logo C - Custom Artwork - Specify Custom Artwork Number1

Card Numbering2 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)4 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)3 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)3

Y = iCLASS Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Slot Punch V - Vertical Slot Punch

Option - Custom Artwork2 (Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork) Enter your final card options from check boxes above. Example: 3350PMSMV Final Part Number

335

V

-

(Options #)

iCLASS Card Programming Information Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. The Printed card number is placed in the top left-hand corner on the back of the card. HID logo molded into base on back. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 3 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. 1 2

Page 60 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE + Other HF Card - 391 The SIO-Enabled iCLASS with MIFARE Classic or MIFARE DESFire EV1 contactless smart card offers multiple High Frequency technologies to simplify card issuance for diverse systems or migration projects. This card offers maximized compatibility installations that contain iCLASS SE or MIFARE Classic / MIFARE DESFire EV1 credentials. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

391 Composite 40% Polyester / PVC *

iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE Classic 1K) 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

Front Packaging

Card Programming (Select one option) R - iCLASS programmed with Secure Identity Object (SIO), 2nd Technology programmed with Secure Identity Object (SIO) P - iCLASS programmed with Secure Identity Object (SIO), 2nd Technology unprogrammed for use with iCLASS SE encoder (HID MIFARE or custom encoding) K - iCLASS programmed with Secure Identity Object (SIO), 2nd Technology programmed with HID MIFARE Classic or custom MIFARE Classic (option M or N 2nd HF only). A - iCLASS unprogrammed for use with iCLASS SE Encoder, 2nd Technology programmed with Secure Identity Object (SIO) B - iCLASS unprogrammed for use with iCLASS SE Encoder, 2nd Technology unprogrammed for use With iCLASS SE encoder (HID MIFARE or custom encoding) V - iCLASS unprogrammed for use with iCLASS SE Encoder, 2nd Technology unprogrammed for use with iCLASS SE encoder (SIO, HID MIFARE or custom encoding)

2nd High Frequency Technology (Select one option) M - MIFARE Classic 1K Bytes (only available with iCLASS 2k bits) N - MIFARE Classic 4K Bytes K - MIFARE DESFire EV1 8K Bytes

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

iCLASS SE Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)6 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Slot Punch IMPORTANT - Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge holder to attach this card to a lanyard or badge clip. N - No Slot Punch

2nd High Frequency Technology Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final card options from the above selections. Example: 3914RNGCMNM Final Part Number

June 2019

N

-

(Options #)

Page 61 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

2nd 13.56 MHz technology Card Programming Information Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 5 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 1 2

Page 62 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS SE + Other 13.56 MHz + Prox Card - 396 The SIO-enabled card with MIFARE Classic or MIFARE DESFire EV1 contactless smart card as well as HID Proximity offers multiple High Frequency technologies to simplify card issuance for diverse systems or migration projects. This card offers maximized compatibility into installations that contain iCLASS SE or MIFARE Classic / MIFARE DESFire EV1 credentials. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

396 Composite 40% Polyester / PVC *

iCLASS SE Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE Classic 1K) 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

13.56 MHz Technology Card Programming (Select one option) R - iCLASS programmed with Secure Identity Object (SIO), 2nd Technology programmed with Secure Identity Object (SIO) P - CLASS programmed with Secure Identity Object (SIO), 2nd Technology unprogrammed for Use with iCLASS SE encoder (HID MIFARE or custom encoding) A - iCLASS unprogrammed for use with iCLASS SE Encoder, 2nd Technology programmed with Secure Identity Object (SIO) V - iCLASS unprogrammed for use with iCLASS SE Encoder, 2nd Technology unprogrammed for use with iCLASS SE encoder (SIO, HID MIFARE or custom encoding)

Front Packaging

2nd High Frequency (13.56 MHz) Technology (Select one option) M - MIFARE Classic 1K Bytes (only available with iCLASS 2k bits) N - MIFARE Classic 4K Bytes K - MIFARE DESFire EV1 8K Bytes

125 kHz Technology Card Programming (Select one option) P - Programmed with HID Prox or Indala format. C - Programmed with CASI Prox. N - Unprogrammed HID Prox.

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

iCLASS SE Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Slot Punch IMPORTANT - Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge holder to attach this card to a lanyard or badge clip. N - No Slot Punch

2nd 13.56 MHz Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

June 2019

Page 63 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

125 kHz Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final card options from the above selections. Example: 3964PNPGGNNM Final Part Number

N

-

(Options #)

iCLASS SE Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

2nd 13.56 MHz Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

125 kHz Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 3 The Printed card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card. 4 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 1 2

Page 64 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Credentials iCLASS Card - 200 / 210 iCLASS cards can be ordered either with both SIO and iCLASS programming or iCLASS programming only. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model:

200 Standard PVC

210 Composite 40% Polyester / PVC*

iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

iCLASS Programming (Select one option) HP - Programmed with Security Identity Object (SIO) and standard iCLASS Access Control Application (Recommended)1 P - Programmed with standard iCLASS Access Control Application C - Unprogrammed, for use with iCLASS SE Encoder

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number2

Back Packaging (Select one option) G - Plain White with Gloss Finish3 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number2 1 - Plain White with Gloss Finish with Magnetic Stripe3 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number2

Card Numbering4 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)8 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)7 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)7 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Slot Punch5 (Select one option) N - No slot punch, This card can be slotted vertically, Printed Vertical Slot Indicators B - No Slot Punch, This card can be slotted horizontally, Printed Horizontal Slot Indicators7 V - Vertical Slot Punch H - Horizontal Slot Punch6

Y = iCLASS Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Option - Custom Artwork2 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final card options from check boxes above. Example: 2000HPGGNN Final Part Number

-

(Options #)

iCLASS Card Programming Information Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Secure Identity Object (SIO) Programming is not mandatory but highly recommended. If SIO programming is not selected the letter H should be left out from Final Part Number, for example: 2000PGGNN 2 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 3 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 4 The Printed card number is placed in the bottom right-hand corner on the back of the card. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. 6 The ability to add a horizontal slot punch requires a different iCLASS antenna design. Users can expect a read range reduction of approximately 20% if they order option H for the Slot Punch. 7 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 1

June 2019

Page 65 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS + Prox card - 212 iCLASS + Prox cards can be ordered either with both SIO and iCLASS programming or iCLASS programming only, a composite fee applies to this card. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

212 Composite 40% Polyester / PVC*

iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

Programming (Select one option)

Front Packaging

HP - Programmed with Security Identity Object (SIO), and standard iCLASS access control application, 125 kHz Unprogrammed.1 HB - Programmed with Security Identity Object (SIO), and standard iCLASS access control application, 125 kHz programmed with HID Prox or Indala format P - Programmed with standard iCLASS access control application, 125 kHz HID Prox unprogrammed for use with iCLASS SE Encoder B – 125 kHz Programmed with HID Prox or Indala format, iCLASS programmed with standard access control application C - iCLASS Unprogrammed, for use with iCLASS SE Encoder, HID Prox unprogrammed for use with iCLASS SE Encoder A - iCLASS Unprogrammed, for use with iCLASS SE Encoder, 125 kHz programmed with HID Prox or Indala format M - iCLASS Programmed, HITAG2 blank. I - iCLASS configured field programmable, HITAG2 blank.

125 kHz

Front Packaging (Select one option)

Back Packaging

G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number2

Back Packaging (Select one option) G - Plain White with Gloss Finish3 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number2 1 - Plain White with Gloss Finish with Magnetic Stripe3 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number2

iCLASS Card Numbering4 (Select one option)

12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

M - Sequential Matching Encoded/Printed (Inkjetted)7 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)6 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)6 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Slot Punch5 (Select one option) V - Vertical Slot Punch N - No slot punch, This card can be slotted vertically, Printed Vertical Slot Indicators

125 kHz Card Numbering4 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)7 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)6 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)6 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Option - Custom Artwork2 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final card options from the above selections. Example: 2120HPGGNNN Final Part Number

Page 66 of 109

-

(Options #)

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

125 kHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

Secure Identity Object (SIO) Programming is not mandatory but highly recommended. If SIO programming is not selected the letter H should be left out from Final Part Number, for example: 2120PGGNNN 2 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 3 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 4 The Printed card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. 6 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards. 1

* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.

June 2019

Page 67 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Key - 205 The iCLASS Key can be ordered either with both SIO and iCLASS programming or iCLASS programming only. Attach to a key ring or badge clip for convenient use. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

205 Base Model

iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

Programming (Select one option) H - Programmed with Security Identity Object (SIO) and standard iCLASS access control application (Recommended) P - Programmed iCLASS standard access control application only C - iCLASS Unprogrammed, for use with iCLASS SE Encoder

.24 in [6 mm]

1. 55 in [39.4 mm]

Front Packaging N - iCLASS Key II - Black with blue insert. Includes HID Standard Artwork

Back Packaging N - None

Key Numbering1 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)4 N - No Printed Key Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)3 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)3 A - Sequential Matching Encoded/Printed (Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Engraved) C - Random Encoded/Non-Matching Sequential Printed (Engraved)

1. 25 in [31.75 mm]

Additional Options3 N - None Enter your final card options from the above selections. Example: 2050HNNMN Final Part Number

205

N

N

N

iCLASS Key Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

1 The 2 3

Printed key number is placed on the back of the key. Key Ring sold separately (Part Number: 57-0001-02) . Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards.

Page 68 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Tag - 206 The iCLASS contactless smart Tag can be ordered either with both SIO and iCLASS programming or iCLASS programming only. iCLASS enable existing credentials or non-metallic devices such as cell phones or PDAs by adhering the iCLASS Tag. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

206 Base Model iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

iCLASS Programming information (Select one option) H - Programmed with Security Identity Object (SIO) and standard iCLASS access control application. (Recommended) P - Programmed with iCLASS access control application only C - iCLASS Unprogrammed, for use with iCLASS SE Encoder

Front Packaging (Select one option) K - Black with HID Standard Artwork C - Custom Artwork - Specify Custom Artwork Number2

Back Packaging S - Adhesive Backing

Tag Numbering1(Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)4 N - No Printed Tag Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4

Front Packaging

Slot Punch N - None

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final Tag options from check boxes above. Example: 2060HSSNN Final Part Number

206

S

N

-

(Options #)

iCLASS Tag Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

The Printed tag number is placed on the back of the tag. For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost. The iCLASS Tag is not for use on cards that use full insertion or tractor feed type readers. 4 Please note that cards shipped out of the Americas are always laser-engraved. Inkjetted option is not available for these cards. 1 2 3

Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does not claim that the iCLASS Tag will work in every situation. Functional and non-functional iCLASS Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering.

June 2019

Page 69 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Clamshell Card - 208 Can be ordered either with both SIO and iCLASS programming or iCLASS programming only. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

208 Base Model iCLASS Memory Size and Allocation 0 - 2k Bits (256 Bytes) with 2 Application Areas

iCLASS Programming (Select one option) HP - Programmed with Security Identity Object (SIO) and standard iCLASS access control application. (Recommended)1 P - Programmed with standard iCLASS access control application only C - iCLASS Unprogrammed, for use with iCLASS SE Encoder

Front Packaging (Select one option) M - Plain White Vinyl with Matte Finish G - Plain White with Gloss Finish C - Custom Artwork - Specify Custom Artwork Number2

Back Packaging (Select one option) S - Base with Molded HID Logo C - Custom Artwork - Specify Custom Artwork Number2

Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)3 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)3 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)3

Y = iCLASS Programming 12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Slot Punch V - Vertical Slot Punch

Option - Custom Artwork2 (Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork) Enter your final card options from check boxes above. Example: 2080HPGSNV Final Part Number

208

V

-

(Options #)

iCLASS Card Programming Information Format # HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Secure Identity Object (SIO) Programming is not mandatory but highly recommended. If SIO programming is not selected the letter H should be left out from Final Part Number, for example: 2080PGSNV 2 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 3 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. The majority of part numbers include a printed Sales Order number, contact your local support representative for full details. 1

Page 70 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS + Other HF Card - 242 iCLASS with MIFARE Classic or MIFARE DESFire EV1 contactless smart card offers multiple High Frequency technologies to simplify card issuance for diverse systems or migration projects. For MIFARE Classic: This credential is only delivered with MIFARE Classic UID 4 Bytes long only (32 Bit). It is not available with 7 bytes UID for MIFARE Classic, only for MIFARE DESFire EV1. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

242 Composite 40% Polyester / PVC *

iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE Classic 1K) 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

Front Packaging

Card Programming (Select one option) J – iCLASS programmed with Security Identity Object (SIO) and iCLASS standard access control application, 2nd technology programmed with Security Identity Object (SIO) H – iCLASS programmed with Security Identity Object (SIO) and iCLASS standard access control application, 2nd technology unprogrammed B – iCLASS programmed with iCLASS standard access control application, 2nd Technology programmed with HID MIFARE (MIFARE Classic) or custom (MIFARE DESfire) P - iCLASS programmed with iCLASS standard access control application, 2nd Technology unprogrammed C - Unprogrammed iCLASS, for use with iCLASS SE Encoder, Non-programmed 2nd Technology A – iCLASS unprogrammed, for use with iCLASS SE Encoder, 2nd Technology programmed with HID MIFARE (MIFARE Classic) or custom (MIFARE DESfire)

2nd High Frequency Technology (Select one option) M - MIFARE Classic 1K Bytes (only available with iCLASS 2k bits) N - MIFARE Classic 4K Bytes K - MIFARE DESFire EV1 8K Bytes

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

iCLASS Card Numbering3 (Select one option)

12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Slot Punch IMPORTANT - Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge holder to attach this card to a lanyard or badge clip. N - No Slot Punch

2nd

High Frequency Technology Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)6 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final card options from the above selections. Example: 2420HNGGNNN Final Part Number

June 2019

N

-

(Options #)

Page 71 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

2nd 13.56 MHz Technology Card Programming Information Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 3 The Printed card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card. 4 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. 5 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 1 2

Page 72 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

iCLASS + Other 13.56 MHz + Prox Card - 262 The iCLASS with MIFARE Classic or MIFARE DESFire EV1 contactless smart card as well as HID Proximity offers multiple High Frequency technologies to simplify card issuance for diverse systems or migration projects. For MIFARE Classic: This credential is only delivered with MIFARE Classic UID on 4 Bytes long only (32 Bit). It is not available with 7 bytes UID for MIFARE Classic, only for MIFARE DESFire EV1. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

262 Composite 40% Polyester / PVC *

iCLASS Memory Size and Allocation (Select one option) 0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE Classic 1K) 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1

iCLASS / 2nd 13.56 MHz Programming J - iCLASS programmed with Security Identity Object (SIO) and iCLASS standard access control application, 2nd technology programmed with Security Identity Object (SIO) H - iCLASS programmed with Security Identity Object (SIO) and iCLASS standard access control application, 2nd technology unprogrammed K - iCLASS programmed with Secure Identity Object (SIO) and iCLASS standard access control application, 2nd Technology programmed with HID MIFARE (MIFARE Classic) or custom (MIFARE DESfire) B - iCLASS programmed with iCLASS standard access control application, 2nd Technology programmed with HID MIFARE (MIFARE Classic) or custom (MIFARE DESfire) P - iCLASS programmed with iCLASS standard access control application, 2nd Technology unprogrammed C - iCLASS unprogrammed, for use with iCLASS SE Encoder, 2nd Technology unprogrammed A - iCLASS unprogrammed, for use with iCLASS SE Encoder, 2nd Technology programmed with HID MIFARE (MIFARE Classic) or custom (MIFARE DESfire).

Other 13.56 MHz Technology (Select one option) M - MIFARE Classic 1K Bytes (only available with iCLASS 2k bits) N - MIFARE Classic 4K Bytes K - MIFARE DESFire EV1 8K Bytes

125 kHz Technology Card Programming (Select one option) P - Programmed with HID Prox or Indala format. C – Programmed with Indala CX (Casi Prox) N – Unprogrammed HID Prox, for use with iCLASS SE Encoder

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish Specify Custom Artwork Number1

1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe – Specify Custom Artwork Number1

iCLASS Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved)4

B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4

Slot Punch

IMPORTANT - Dual High Frequency credentials do not allow a slot punch due to the antenna design.

HID recommends using a

badge holder to attach this card to a lanyard or badge clip. N - No Slot Punch

2nd 13.56 MHz Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4 A - Sequential Matching Encoded/Printed (Laser Engraved)

B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

125 kHz Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)4 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4 A - Sequential Matching Encoded/Printed (Laser Engraved)

June 2019

B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Page 73 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final card options from the above selections. Example: 2624JNGGNNN Final Part Number

N

-

(Options #)

iCLASS Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

2nd 13.56 MHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

125 kHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

1 For

new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 3 The Printed card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card. 4 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 2

Page 74 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

UHF Credentials UHF Card - 600 The SIO Enabled UHF (Ultra High Frequency: 860-960 MHz) contactless smart card is designed for long read range (parking, gate, healthcare…) while leveraging your investment in existing access control systems. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element. Direct to Card printing on these cards is not recommended. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

600 Composite 40% Polyester / PVC *

Secure Identity Object Programming T - UHF Programmed with Secure Identity Object (SIO)

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

UHF Card Numbering3 (Select one option) N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Slot Punch N - No Slot Punch

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final card options from the above selections. Example: 600TGGNN Final Part Number

600

T

N

-

(Options #)

UHF Programming Information5 Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

1 For

new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand on the back of the card and include the sales order number . The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 3 The Printed card number is placed in the bottom right-hand corner for UHF 5 Number of bits should remain below 120 bits * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 2

June 2019

Page 75 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

UHF + iCLASS Card - 601 The SIO enabled UHF/iCLASS smart card provides a secure long range parking and gate control solution that can be used in conjunction with existing access control technologies. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element. Direct to Card printing on these cards is not recommended. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

601 Composite 40% Polyester / PVC *

iCLASS Memory Size and Allocation 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1 S - UHF Programmed with Secure Identity Object (SIO). iCLASS programmed with standard iCLASS standard access control application and Secure Identity Object (SIO) T - UHF Programmed with Secure Identity Object (SIO). iCLASS programmed with Secure Identity Object (SIO) H - UHF Programmed with Secure Identity Object (SIO). iCLASS programmed with standard iCLASS access control appliation C - UHF Programmed with Secure Identity Object (SIO). iCLASS unprogrammed for use with iCLASS SE Encoder

2.125" (5.4 cm)

Card Programming

3.370" (8.57) cm

Front Packaging (Select one option) 0.033" (0.084 cm)

G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

UHF Card Numbering3 (Select one option) N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

OPTIONAL MAGNETIC STRIPE ½" ‘(HICO/HIGH ENERGY -4000OE)

©

iCLASS UHF

iCLASS Card Numbering3 (Select one option)

4*12345 ICLASS

N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

12345 YYYYYYYY-YY SR UHF

YYYYYYYY – YY = Sales Order Number

Slot Punch N - No Slot Punch

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final card options from the above selections. Example: 6013TGGNNN Final Part Number

601

N

(Options #)

UHF Programming Information5 Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB #

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

iCLASS Programming Information Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

1 For

new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 3 The Printed card number is placed in the bottom right-hand corner for UHF 5 Number of bits should remain below 120 bits * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 2

Page 76 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

UHF + MIFARE Classic Card - 603 The SIO enabled UHF/MIFARE Classic smart card provides a secure long range parking and gate control solution that can be used in conjunction with existing access control technologies. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element. Direct to Card printing on these cards is not recommended. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

603 Composite 40% Polyester / PVC *

Card Programming J - UHF Programmed with Secure Identity Object (SIO), MIFARE programmed with Secure Identity Object (SIO) P - UHF Programmed with Secure Identity Object (SIO), MIFARE non-programmed H - UHF Programmed with Secure Identity Object (SIO), MIFARE programmed with HID MIFARE access control application K - UHF Programmed with Secure Identity Object (SIO), MIFARE custom programmed (custom part suffix required)

MIFARE Memory Size and Allocation M – 4K Bytes

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1 1 - Plain White with Gloss Finish with Magnetic Stripe2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1

UHF Card Numbering3 (Select one option) N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Slot Punch N - No Slot Punch

MIFARE Card Numbering3 (Select one option) N - No Printed Card Numbering A - Sequential Matching Encoded/Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork) Enter your final card options from the above selections. Example: 603JMGGANA Final Part Number

603

N

(Options #)

UHF Programming Information5 Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

June 2019 ©2016 - 2019 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation. Page 77 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

MIFARE Programming Information Format Number HID Elite ICE/MOB #

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

1 For

new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 3 The Printed card number is placed in the bottom right-hand corner for UHF 5 Number of bits should remain below 120 bits * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering. 2

Page 78 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

HID Proximity Credentials ProxCard II Card - 1326 Ensure each required option has been checked with the appropriate choice to fulfill a completed order form. 1326 Base Model 125 kHz Programming (Select one option) L – Programmed with HID or Indala format N – HID Prox unprogrammed, for use with iCLASS SE Encoder

Front Packaging (Select one option) S - ProxCard II Artwork - Vinyl with Matte Finish M - Plain White Vinyl with Matte Finish G - Plain White PVC with Gloss Finish C - Custom Artwork - Specify Custom Artwork Number1

Back Packaging (Select one option) S - Base with Molded HID Logo C - Custom Artwork - Specify Custom Artwork Number1

Card Numbering2 (Select one option)

(Cover) Front Packaging

M - Sequential Matching Encoded/Printed (Inkjetted) 3 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted) 3 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)3

(Base) Back Packaging

12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Slot Punch V - Vertical Slot Punch

Option - Custom Artwork2 (Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork) Enter your final card options from check boxes above. Example: 1326LSSMV Final Part Number

1326

V

-

(Options #)

125 kHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. The Printed card number is placed in the top left-hand corner on the back of the card. HID logo molded into base on back. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 3 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. 1 2

June 2019

Page 79 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

DuoProx® II Card - 1336 / 1536 Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

1336 Standard PVC

1536 Composite 40% Polyester / PVC *

125 kHz Programming (Select one option) L - Programmed with HID Prox or Indala format N - Unprogrammed HID Prox, for use with iCLASS SE Encoder

Front Packaging (Select one option) G - Plain White PVC w/ Gloss Finish C - Custom Artwork w/ Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White PVC w/ Gloss Finish2 S - Standard DuoProx II Artwork Gloss Finish2 C - Custom Artwork w/ Gloss Finish - Specify Custom Artwork Number1, 2

Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Engraved) C - Random Encoded/Non-Matching Sequential Printed (Engraved)

Back Packaging

Slot Punch4 (Select one option)

12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

N - No slot punch, Printed Vertical and Horizontal Slot Indicators V - Vertical Slot Punch, Printed Horizontal Slot Indicators H - Horizontal Slot Punch, Printed Vertical Slot Indicators

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork) Enter your final card options from check boxes above. Example: 1336LGGMN Final Part Number

-

(Options #)

125 kHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. 4 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering. 5 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. 6 Programmed as a sequential 12 digit number. * The composite construction is recommended for all cards that will have an over-laminate applied. 1 2

Page 80 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

ProxKey III Keyfob - 1346 Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

1346 Base Model Programming (Select one option) L – Programmed with HID Prox or Indala format N – Unprogrammed HID Prox, for use with iCLASS SE Encoder

Front Packaging

Back Packaging S - Standard

Keyfob Numbering2 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted) 3 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted) 3 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)3 A - Sequential Matching Encoded/Printed (Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Engraved) C - Random Encoded/Non-Matching Sequential Printed (Engraved)

Additional

Back Packaging

1. 25 in [31.75 mm]

Front Packaging

Options4

Shown - Front Packaging Option “N”

N - No Option Enter your final ProxKey options from check boxes above. Example: 1346LNSMN Final Part Number

1. 55 in [39.4 mm]

.24 in [6 mm]

N - ProxKey III - Black with grey insert. Includes HID Standard Artwork C - ProxKey III - Custom Artwork - Specify Custom Artwork Number1

1346

S

12345 = Keyfob ID Number YYYYYYYY-YY = Sales Order Number

N

125 kHz ProxKey Programming Information Format #

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. The Printed number is placed on the back of the Keyfob. 3 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. 4 Key Ring sold separately (Part Number: 57-0001-02) 1 2

June 2019

Page 81 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

ISOProx® II Card - 1386 / 1586 Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

1386 Standard PVC

1586 Composite 40% Polyester / PVC *

125 kHz Programming (Select one option) L – Programmed with HID Prox or Indala format N – Unprogrammed HID Prox, for use with iCLASS SE Encoder.

Front Packaging (Select one option)

Front Packaging

G - Plain White PVC w/ Gloss Finish C - Custom Artwork w/ Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White PVC w/ Gloss Finish2 C - Custom Artwork w/ Gloss Finish - Specify Custom Artwork Number1, 2

Card Numbering (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Engraved) C - Random Encoded/Non-Matching Sequential Printed (Engraved)

Back Packaging

Slot Punch4 (Select one option) N - No slot punch, Printed Vertical and Horizontal Slot Indicators V - Vertical Slot Punch, Printed Horizontal Slot Indicators H - Horizontal Slot Punch, Printed Vertical Slot Indicators

12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Option - Custom Artwork1

(Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork) Enter your final card options from check boxes above. Example: 1386LGGMN Final Part Number

-

(Options #)

125 kHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. 4 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering. 5 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. * The composite construction is recommended for all cards that will have an over-laminate applied. 1 2

Page 82 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

ProxPass® II Active Vehicle Identification Tag - 1351 (Compatible with MaxiProx 5375) Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

1351 Base Model Programming1 L – Programmed with HID Prox format

Color B - Standard beige finish

Back Packaging S - Standard HID logo

Tag Numbering (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted) N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted) R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)

Front Packaging

Back Packaging

12345 = Tag ID Number YYYYYYYY-YY = Sales Order Number

Hardware Option N - None

Enter your final Tag options from check boxes above. Example: 1351LBSMN Final Part Number

1351

L

B

S

N

-

(Optional Artwork #)

125 kHz Tag Programming Information1 Format Number

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

1

The ProxPass II does not support formats longer than 37-bits (including 48-bit Corporate 1000)

The ProxPass II Tag includes two replaceable Encoded batteries and Velcro strips for a complete and simple installation.

Battery Part # BR2330 is available at most electronic stores (not sold by HID).

June 2019

Page 83 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

MicroProx® Tag Proximity - 1391 Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

1391 Base Model Programming (Select one option) L – Programmed with HID Prox or Indala format N – Unprogrammed HID Prox for use with iCLASS SE Encoder

Front Packaging (Select one option) S - Gray with HID Standard Artwork G - Plain Gray Finish, (No Artwork) C - Custom Artwork - Specify Custom Artwork Number1

Back Packaging3 S - Adhesive Backing

Tag Numbering2 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)3 N - No Printed Tag Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted) 3 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted) 3

Slot Punch N - None

Optional Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork) Enter your final Tag options from check boxes above. Example: 1391LSSMN Final Part Number

1391

S

N

-

(Optional Artwork #)

125 kHz Tag Programming Information Format #

1 2 3

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost. The Printed tag number is placed on the back of the tag. Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards.

The MicroProx Tag is not for use on cards that use full insertion or tractor feed type readers. Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does not claim that the MicroProx Tag will work in every situation. Functional and non-functional MicroProx Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering.

MicroProx Placement

Page 84 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Direct Image PVC Glossy Label Part Numbers Part #

Description

Thickness

Dimensions

1324GAV11

ProxCard II size with slot punch, white adhesive back

10 mil PVC

3.310” x 2.060"

1324GAN11

ProxCard II size, no slot punch, white adhesive back

10 mil PVC

3.310” x 2.060"

1324GAV21

ProxCard II size with slot punch, white adhesive back

20 mil PVC

3.310” x 2.060"

1324GAN21

ProxCard II size, no slot punch, white adhesive back

20 mil PVC

3.310” x 2.060"

1324GBV22

ISOProx II and ProxCard II size with slot punch, brown (3M) adhesive back

20 mil PVC

3.370” x 2.125”

1324GBN22

ISOProx II and ProxCard II size, no slot punch, brown (3M) adhesive back

20 mil PVC

3.370” x 2.125”

1324GAV22

ISOProx II and ProxCard II size, with slot punch, white adhesive back

20 mil PVC

3.370” x 2.125”

1324GAN22

ISOProx II and ProxCard II size, no slot punch, white adhesive back

20 mil PVC

3.370” x 2.125”

Notes: 

Some dye sublimation printers cannot accommodate pre-slot punched labels; consult with the printer manufacturer prior to ordering.



Labels are packaged in multiples of 100 pieces. Minimum order quantity is 100 pieces. Orders will be accepted in multiples of 100 pieces per label Model.



Make sure to adjust your dye sublimation printer setting to the proper PVC label thickness and dimension.

June 2019

Page 85 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Indala 125 kHz Credential Every part number consists of a base model number to indicate the type of product, and a letter or number to indicate each product option. Each Indala product has a standard part number that includes default options, as indicated on the order guide. When an order is placed for a product, the base model number and all options must be specified. If you require any options that are different from the default options, you must also indicate those options at the time the order is placed. All part numbers must be complete to be accepted by HID’s order entry system. All card orders must have the following information: 

BASE MODEL NUMBER - Specifies card or type



PROGRAMMING - Specifies if card is factory or field programmed (format or format number, facility code, and ID number range must be given at time of order)



FRONT or FLAT SIDE GRAPHICS - Specifies standard or custom artwork, and smart chip placement



BACK or EMBOSSED SIDE GRAPHICS - Specifies standard or custom artwork, and smart chip placement



MARKING POSITION - Specifies location of card marking.

Note: Card marking is surface printed and, therefore is not to be considered permanent. In certain cases Laser etching may be used instead of inkjet marking. Laser etching is permanent marking but is not used on all products. 

SLOT PUNCH - Specifies slot location if available



CARD OPTIONS - Applies to FlexCard® (Base Model FPCRD/CXCRD) only



MAGNETIC STRIPE OPTION - Specifies if card is to have a magstripe and which type (ISO Imageable Cards only)



CUSTOM FILE NUMBER - Specifies the artwork number to be used

Page 86 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

FPISO - FlexPass Imageable Card Standard Part No.: Description:

FPISO-SSSCNA-0000 125 kHz, white glossy finish front, white glossy finish with Indala logo back, marking on standard location, no slot punch, no magstripe, no artwork

FPISO S S S

C

N

A

0000

BASE MODEL NUMBERS PROGRAMMING FRONT GRAPHICS BACK GRAPHICS MARKING POSITION SLOT PUNCH MAGNETIC STRIPE OPTION CUSTOM FILE NO BASE MODEL NUMBERS FPISO FlexISO® Proximity Card FPWGD FlexISO Proximity and Wiegand Combination Card FPIXT FlexISO XT Composite Proximity Card PROGRAMMING S = Standard, Programmed, Low Frequency 125 kHz - exact coding standard, with no gaps or over-runs (Specify Format Number, Facility Code, and ID Range) N = Not Programmed, Low Frequency 125 kHz (Blank/Programmable) FRONT GRAPHICS S = Standard white glossy finish, suitable for video imaging C = Custom (Artwork on file or new) BACK GRAPHICS S = Standard white glossy finish with Indala logo, card marking (Sales Order & matching internal ID number), suitable for dye sublimation imaging in most areas C = Custom (Artwork on file or new) MARKING POSITION Note: Standard Marking is Label Code E153, which is Sales Order number & matching 5 digit internal ID number, is used unless otherwise specified. E153 marking is not compatible with programming option N. C = Position 3/Standard Location (Back Side/Lower Right Corner) Note: Inkjet marking is surface printed and, therefore is not to be considered permanent. In some cases Laser etching will replace inkjet marking. Laser etching is permanent in most applications. SLOT PUNCH N = None V = Vertical (portrait orientation) - Unavailable for FPWGD H = Horizontal (landscape orientation) MAGNETIC STRIPE OPTION A = No Magstripe B = Standard Magstripe (3-track, high coercivity, 4000 oersted) CUSTOM FILE NUMBER (4 Characters - Factory Assigned) 0000 = No Artwork (Call your Customer Service Representative for new artwork)

June 2019

Optional Magnetic Stripe 14098765 12345

Position C

Page 87 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

FPCRD - FlexCard Standard Card Standard Part No.: Description:

FPCRD-SSSMW-0000 125 kHz, printed Indala logo on front, embossed Indala logo on back, card marking on flat side (lower right corner with slot to the right), white color (not printable), no artwork. Vertical slot punch only.

FPCRD

S

S

S

M

W

0000

BASE NUMBER PROGRAMMING FLAT SIDE GRAPHICS EMBOSSED SIDE GRAPHICS MARKING POSITION CARD OPTION CUSTOM FILE NO BASE NUMBER FPCRD - 125 kHz Clamshell type Proximity Card PROGRAMMING S = Standard, Programmed, Low Frequency 125 kHz - exact coding standard, with no gaps or over-runs (Specify Format or Format Number, Facility Code, and ID Range) N = Not Programmed, Low Frequency 125 kHz (Blank/Programmable) FLAT SIDE GRAPHICS S = Standard (Flat Side with printed Indala logo) C = Custom (Artwork on file or new) EMBOSSED SIDE GRAPHICS S = Standard (Embossed Side with embossed Indala logo) C = Custom (Artwork on file or new, still with embossed Indala logo) MARKING POSITION Notes:   

Standard Marking or Label Code E153, which is Sales Order number & matching internal ID number, is used unless otherwise specified. Inkjet marking is surface printed and, therefore is not to be considered permanent. In some cases Laser etching will replace inkjet marking. Laser etching is permanent in most applications. E153 marking is not compatible with programming option N

A = Position 1/Flat Side (with slot punch to the right, lower left corner) - available with Printable Option only C = Position 3/Flat Side (with slot punch to the right, lower right corner) - available with Printable Option only K = Position 1/Embossed Side (with slot punch to the right, lower left corner) M = (Standard) = Position 3/Embossed Side (with slot punch to the right, lower right corner) CARD OPTION W = White (standard color) - surface treated with UV protection - may not accept printing P = Printable, matt finish - No varnish, no logo, surface will accept post printing Flat side

CUSTOM FILE NUMBER (4 Characters - Factory Assigned) 0000 = No Artwork Call your Customer Service Representative for new artwork A (1)

C (3) position(s)

Page 88 of 109

Embose side

K

M (3)

(1) position(s)

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

FPTAG - FlexTag Standard Part No.: FPTAG-SSSS-XXXX Description: 125 kHz, printed Indala logo on front side

FPTAG

S

S

S

S

XXXX

BASE NUMBER PROGRAMMING FRONT GRAPHICS BACK GRAPHICS MARKING POSITION CUSTOM FILE NO BASE NUMBER FPTAG - 125 kHz Keytag Type Proximity Card PROGRAMMING S = Standard Programmed, Low Frequency 125 kHz - exact coding standard, with no gaps or over-runs. (Specify Format or Format Number, Facility Code, and ID Range) N = Not Programmed FRONT GRAPHICS S = Standard (printed Indala logo) BACK GRAPHICS S = Standard (no logo, printed strip for marking) MARKING POSITION Notes:   

Standard Marking or Label Code E201, which is a shortened version of the Sales Order number & matching internal ID number, is used unless otherwise specified. Inkjet marking is surface printed and, therefore is not to be considered permanent. Most Keytag marking will be with Laser etching which is permanent in most applications. E201 marking is not compatible with programming option N

S = Standard (back side on printed strip) CUSTOM FILE NUMBER XXXX (4 Characters - Factory Assigned) 0002 = No Artwork AAAA = Custom Artwork. Contact your Customer Service Representative for new artwork.

June 2019

Page 89 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

FPKEY - FlexKey Keytag Standard Part No.: FPKEY-SSSS-0000 Description:125 kHz, printed Indala logo on front side, printed strip for marking on back side

FPKEY

S

S

S

S

0000

BASE NUMBER PROGRAMMING FRONT GRAPHICS BACK GRAPHICS MARKING POSITION CUSTOM FILE NO BASE NUMBER FPKEY - 125 kHz Keytag Type Proximity Card PROGRAMMING S = Standard, Programmed, Low Frequency 125 kHz - exact coding standard, with no gaps or over-runs (Specify Format or Format Number, Facility Code, and ID Range) N = Not Programmed, Low Frequency 125 kHz (Blank/Programmable) FRONT GRAPHICS S = Standard (printed Indala logo) C = Custom (Artwork on file or new) BACK GRAPHICS S = Standard (no logo, printed strip for marking) C = Custom (Artwork on file or new) MARKING POSITION Notes:   

Standard Marking or Label Code E201, which is a shortened version of the Sales Order number & matching internal ID number, is used unless otherwise specified. Inkjet marking is surface printed and, therefore is not to be considered permanent. Most Keytag marking will be with Laser etching which is permanent in most applications. E201 marking is not compatible with programming option N

S = Standard (back side on printed strip) CUSTOM FILE NUMBER (4 Characters - Factory Assigned) 0000 = No Artwork Call your Customer Service Representative for new artwork.

Page 90 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

FlexPass Formats The following formats are non-proprietary and are available to all customers. Format Name: 26-BIT WIEGAND Card Format Number Facility Code Range 40134 0 to 255 ASP 10022 0 to 255

ID Number Range 0 to 65,535 (Systems installed prior to June 2003) 0 to 65,535 (All new Systems except FP Lite)

Reader Format Numbers 10022 (1L = 1x Wire for LED control) 10200 (2L = 2x Wires for LED control) Format Name: 27-BIT INDALA Card Format Number Facility Code Range 4010X 0 to 8,191

ID Number Range 0 to 16,383

Reader Format Numbers 10251 (1L = 1x Wire for LED control) 1026X (2L = 2x Wires for LED control) Format Name: ABA TRACK 2 Card Format Numbers Facility Code Range 4038X (ASP) 0 to 255 17256 (ASP+) 0 to 99,999

ID Number Range 0 to 99,999 0 to 99,999

Reader Format Numbers 11037 OC (Open Collector) 11738 PUR (Pull Up Resistor) Format Name: RS232 Serial Data Card Format Number Card Programming Range 16144 up to 24 characters in total length, i.e. ABCD12345678901234567890 Reader Format Number 16144 Format Options for FP506B/FP507B Proximity & Keypad Readers (e.g. Format 10022K01) CFG. Number

Buf/Unbuf

Data Type

K01

UnBuffered

8-bit burst

K02

UnBuffered

8-bit burst

K03

Buffered

Wiegand

facility code xx

K04

Buffered

Wiegand

facility code xx

K05

Buffered

Magstripe

LSB First

4 digit PIN

*/# keys enabled

ARK-501 BUFFERED

K06

Buffered

Magstripe

LSB First

4 digit PIN

*/# keys disabled

ARK-501 BUFFERED PINKERTON

K07

Buffered

Magstripe

LSB First

5 digit PIN

*/# keys enabled

K08

Buffered

Magstripe

LSB First

5 digit PIN

*/# keys disabled

K09

Buffered

Magstripe

MSB First

4 digit PIN

*/# keys enabled

K10

Buffered

Magstripe

MSB First

4 digit PIN

*/# keys disabled

K11

Buffered

Magstripe

MSB First

5 digit PIN

*/# keys enabled

K12

Buffered

Magstripe

MSB First

5 digit PIN

*/# keys disabled

K13

Unbuffered

4 bit burst

*/# keys enabled

K14

Unbuffered

4 bit burst

*/# keys disabled

June 2019

Options

Pin Size

Special Keys

Emulates

*/# keys enabled

ARK-501

*/# keys disabled */# keys enabled */# keys disabled

Page 91 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

MIFARE Credentials MIFARE Classic Card - 340 / 345 / 1430 / 1440 / 1436 / 1446 Encompasses the industry’s broadest range of open standard contactless smart card products. Provides the memory structure and capacity to store multiple applications on a single credential. All MIFARE Classic cards can be ordered with or without SIO encoding. Use of a 1430, 1440, 1436, or 1446 for SIO encoding using the CP1000 will consume a chargeable credit. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

MIFARE Classic cards with SIO encoding (Recommended)

OR

MIFARE Classic Cards without SIO encoding

3400 (1K) Standard PVC 3406 (4K) Standard PVC 3450 (1K) Composite 40% Polyester/PVC* 3456 (4K) Composite Polyester 40%/PVC* Programming* (Select one option) P

1430 (1K) Standard PVC 1440 (4K) Standard PVC 1436 (1K) Composite 40% Polyester / PVC * 1446 (4K) Composite Polyester 40% / PVC* Programming (Select one option)

– Programmed with Security Identity Object (SIO) for

MIFARE Classic V - Unprogrammed Secure Identity object (SIO), for MIFARE Classic, for use with iCLASS SE Encoder.

M - Programmed HID MIFARE6 access control application N – Unprogrammed MIFARE Classic for use with iCLASS SE Encoder (custom or HID) S - Custom programmed MIFARE Classic, requires custom part number

* A marker is placed in sector 6 and will not be available for other data

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 1 - Plain White with Gloss Finish with Magnetic Stripe2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2

Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)7 N - No Printed Card Numbering U - UID (CSN) HEX card numbering only (Inkjetted) 4,7 V - UID (CSN) Decimal card numbering only (Inkjetted) 4,7 S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)7 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)7 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved) Z - Reversed UID (CSN) Decimal card numbering only (Laser Engraved)

Slot Punch5 (Select one option) N - No slot punch, Printed Vertical Slot Indicators V - Vertical Slot Punch

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork forms for new artwork)

12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Enter your final card options from check boxes above. Example: 3400PGGNN Final Part Number

Page 92 of 109

-

(Options #)

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

13.56 MHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

HID Elite ICE/MOB # *

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

*HID Elite key not applicable to base parts 1430, 1440, 1436, or 1446 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. 4 When printed, by default the number is encoded MSB (most significant byte) -> LSB (least significant byte). 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering. 6 Includes a permanent Unique MIFARE 32 Bit Serial number. 7 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. * The composite construction is recommended for all cards with over-laminate applied. 1 2

June 2019

Page 93 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

MIFARE Classic + Prox card - 350 / 355 / 1431 / 1441 / 1437 / 1447 Encompasses the industry’s broadest range of open standard contactless smart card products. Provides the memory structure and capacity to store multiple applications on a single credential with the addition of Proximity technology for easier migration. All MIFARE Classic + Prox cards can be ordered with or without SIO encoding. Use of a 1431, 1441, 1437, or 1447 for SIO encoding using the CP1000 will consume a chargeable credit. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

MIFARE Classic + Prox card with SIO encoding (Recommended)

OR

MIFARE Classic + Prox card without SIO encoding

3500 (1K) Standard PVC 3506 (4K) Standard PVC 3550 (1K) Composite 40% Polyester/PVC* 3556 (4K) Composite 40% Polyester/PVC* Programming* (Select one option) P

- Programmed 13.56 MHz with Security Identity Object (SIO) for

MIFARE Classic, unprogrammed 125 kHz HID Prox for use with iCLASS SE Encoder R - Programmed 13.56 MHz Security Identity Object (SIO) for MIFARE Classic, programmed 125 kHz with HID Prox or Indala format V - Unprogrammed 13.56 MHz SIO for MIFARE (for use with iCLASS SE Encoder (SIO), unprogrammed 125 kHz HID Prox for use with iCLASS SE Encoder * A marker is placed in sector 6 and will not be available for other data

1431 (1K) Standard PVC 1441 (4K) Standard PVC 1437 (1K) Composite 40% Polyester / PVC* 1447 (4K) Composite 40% Polyester / PVC* Programming (Select one option) L – Programmed 125 kHz with HID Prox or Indala Format6, unprogrammed 13.56 MHz MIFARE Classic (for use with iCLASS SE Encoder custom or HID) M – Programmed 13.56 MHz HID MIFARE6 access control application, unprogrammed 125 kHz HID Prox for use with iCLASS SE Encoder B – Programmed 13.MHz with HID MIFARE6 access control application, programmed 125 kHz with HID Prox or Indala format N - Unprogrammed 13.56 MHz MIFARE (for use with SE Encoder custom or HID), unprogrammed 125 kHz HID Prox for use with iCLASS SE Encoder S - Custom Programmed 13.56 MHz MIFARE Classic, unprogrammed 125 kHz HID Prox for use with iCLASS SE Encoder, requires custom part number

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 1 - Plain White with Gloss Finish with Magnetic Stripe2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2

13.56 MHz MIFARE Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering U - UID (CSN) HEX card numbering only (Inkjetted) 4,5 V - UID (CSN) Decimal card numbering only (Inkjetted)4,5 S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved) Z - Reversed UID (CSN) Decimal card numbering only (Laser Engraved)

Note: 350 credential may vary.

Slot Punch (Select one option) N - No slot punch. This card can be slotted vertically, Printed Vertical Slot Indicators V - Vertical Slot Punch

125 kHz Proximity Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted) N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted) R - Random Encoded/Non-Matching Sequential Printed (Inkjetted) A - Sequential Matching Encoded/Printed (Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Engraved) C - Random Encoded/Non-Matching Sequential Printed (Engraved)

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork forms for new artwork) Enter your final card options from check boxes above. Example: 3506PGGMNS

Page 94 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Final Part Number

N

-

(Options #)

13.56 MHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB # *

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

*HID Elite key not applicable to base parts 1431, 1441, 1437, or 1447 125 kHz Card Programming Information Format #

Field Name(s) e.g. Facility Code

Value

QTY

For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 3 The Printed card number is placed in the bottom right-hand corner on the back of the card 4 When printed, by default the number is encoded MSB (most significant byte) -> LSB (least significant byte). 5 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. 6 Includes a permanent Unique MIFARE 32 Bit Serial number. * The composite construction is recommended for all cards with over-laminate applied. 1 2

June 2019

Page 95 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

MIFARE Classic Keyfob - 1434 / 1444 Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

1434 (1K)

1444 (4K)

Programming (Select one option) M – Programmed with HID MIFARE3 access control application N – Unprogrammed MIFARE Classic. S - Custom Programmed MIFARE Classic, requires custom part number

Front Packaging (Select one option) S - Standard HID Artwork C - Custom Artwork - Specify Custom Artwork Number1

Back Packaging S - Standard

Key Numbering1 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted) 4 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted) 4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted) 4 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Slot Punch2 N - None Enter your final Key options from check boxes above. Example: 1434NSSNN Final Part Number

S

N

13.56 MHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

The Printed key number is placed on the back of the key. Key Ring sold separately (Part Number: 57-0001-02). Includes a permanent Unique MIFARE 32 Bit Serial number. 4 Please note that cards shipped within the Americas are always laser-engraved. Inkjetted option is not available for these cards. 1 2 3

Page 96 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

MIFARE Classic Adhesive Tag - 1435 Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Base Model

1435 (1K)

Programming (Select one option) M – Programmed with HID MIFARE 6 access control application N – Unprogrammed MIFARE Classic S - Custom programmed MIFARE Classic, custom part number required

Front Packaging (Select one option) S - Standard HID Artwork C - Custom Artwork - Specify Custom Artwork Number1

Back Packaging S - Standard

Tag Numbering1 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted) N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted) R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)

Slot Punch2 N - None Enter your final Tag options from check boxes above. Example: 1435NSSNN Final Part Number

S

N

13.56 MHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

The Printed tag number is placed on the back of the tag. For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost. 3 The Tag is not for use on cards that use full insertion or tractor feed type readers. 4 Includes a permanent Unique MIFARE 32 Bit Serial number. * Up to 1.14in (29mm) read range in free air. 1 2

Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does not claim that the Tag will work in every situation. Functional and non-functional Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering. * = Actual read range performance affected by mounting location, environment and the tags tuned resonant frequency.

June 2019

Page 97 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

MIFARE DESFire EV1 Card - 370 / 375 / 1450 / 1456 Based on open global standards for security, and is interoperable with existing MIFARE DESFire EV1 infrastructures. All MIFARE DESFire EV1 cards can be order either with or without SIO encoding. Use of a 1450 or 1456 for SIO encoding using the CP1000 will consume a chargeable credit. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

OR

Card with SIO encoding 3700 Standard PVC 3750 Composite 40% Polyester/PVC*

1450 Standard PVC 1456 Composite 40% Polyester/PVC*

MIFARE DESFire EV1 Memory Size

MIFARE DESFire EV1 Memory Size

C - 8K Bytes MIFARE DESFire EV1

C - 8K Bytes MIFARE DESFire EV1

Programming P

Card without SIO encoding

Programming (Select one option) N - Unprogrammed 13.56 MHz DESFire EV1 for use with iCLASS SE Encoder (custom) S - Custom MIFARE DESfire EV1 programming – requires custom part number

- Programmed Security Identity Object (SIO) for

MIFARE DESFire EV1 V - Unprogrammed Secure Identity object (SIO) for DESFire EV1, for use with iCLASS SE Encoder (SIO)

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 1 - Plain White with Gloss Finish with Magnetic Stripe2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2

Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)4 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4 A - Sequential Matching Encoded/Printed (Laser Engraved) B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved) C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved) Z - Reversed UID (CSN) Decimal card numbering only (Laser Engraved)

Slot Punch5 N - No Slot Punch. IMPORTANT – 3700, 3750, 1450, and 1456 credentials do not allow a slot punch due to the antenna design, use a badge holder to attach this card to a lanyard or badge clip.

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork) Enter your final card options from check boxes above. Example: 3750CPGGNN Final Part Number

C

-

(Options #)

13.56 MHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

HID Elite* ICE/MOB #

Value

QTY

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

*HID Elite key not applicable to base parts 1431, 1441, 1437, or 1447 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. 3 The Printed card number is placed in the bottom right-hand corner on the back of the card. Permanent Unique MIFARE 56 Bit serial # cannot be printed on cards. 4 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering. * The composite construction is recommended for all cards with over-laminate applied. 1 2

Page 98 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

MIFARE DESFire EV1 + Prox Card - 380 / 385 / 1451 / 1457 Based on open global standards for security, and is interoperable with existing MIFARE DESFire® infrastructures with the addition of Proximity technology for easier migration. All MIFARE DESFire EV1 cards can be order either with or without SIO encoding. Use of a 1451 or 1457 for SIO encoding using the CP1000 will consume a chargeable credit. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.

Card with SIO encoding + Prox (Recommended)

OR

Card without SIO encoding + Prox

3800 Standard PVC 3850 Composite 40% Polyester/PVC*

1451 Standard PVC 1457 Composite 40% Polyester/PVC* *HITAG based cards are not available with composite

MIFARE DESFire EV1 Memory Size C - 8K Bytes DESFire EV1

Programming (Select one option)

MIFARE DESFire EV1 Memory Size C - 8K Bytes DESFire EV1

Programming (Select one option)

P - Programmed 13.56 MHz with Security Identity Object (SIO) for MIFARE DESFire EV1, unprogrammed 125 kHz HID Prox (for use with iCLASS SE Encoder)

L

- Programmed 125 kHz HID Prox or Indala, unprogrammed 13.56

N

- Unprogrammed 13.56 MHz DESFire EV1 for iCLASS SE Encoder

R - Programmed 13.56 MHz with Security Identity Object (SIO) for MIFARE DESFire EV1, programmed 125 kHz HID Prox or Indala

(custom), unprogrammed 125 kHz HID Prox for iCLASS SE Encoder. S - Custom programmed 13.56 MHz DESFire EV1, unprogrammed HID Prox for iCLASS SE Encoder, custom part number required R - Custom programmed 13.56 MHz, programmed 125 kHz HID Prox or Indala, custom part number required F – Unprogrammed 13.56 MHz DESFire EV1 for use with iCLASS SE Encoder (custom), unprogrammed HITAG 1 G - Custom programmed 13.56 MHz DESFire EV1, unprogrammed HITAG 1, custom part number required

V - Unprogrammed 13.56 MHz with Secure Identity object (SIO) for MIFARE DESFire EV1 for use with iCLASS SE Encoder (SIO), unprogrammed 125 kHz HIDProx for use with iCLASS SE Encoder.

MHz DESFire EV1 for SE Encoder (custom).

Front Packaging (Select one option) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1

Back Packaging (Select one option) G - Plain White with Gloss Finish2 1 - Plain White with Gloss Finish with Magnetic Stripe2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2

13.56 MHz DESFire Card Numbering3 (Select one option) M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved)4 B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4

Slot Punch IMPORTANT - MIFARE DESFire EV1 + prox credentials do not allow a slot punch due to the antenna design, use a badge holder to attach this card to a lanyard or badge clip. N - No Slot Punch

125 kHz Card Numbering3 M - Sequential Matching Encoded/Printed (Inkjetted)5 N - No Printed Card Numbering S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5 R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5 A - Sequential Matching Encoded/Printed (Laser Engraved)4 B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4 C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4

June 2019

12345 = Card ID Number YYYYYYYY-YY = Sales Order Number

Page 99 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Option - Custom Artwork1 (Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork) Enter your final card options from check boxes above. Example: 3850CPGGNNN Final Part Number

C

N

-

(Options #)

13.56 MHz Card Programming Information Format Number

Field Name(s) e.g. Facility Code

Value

QTY

HID Elite ICE/MOB # *

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

Encoded Start Number

Encoded Stop Number

Printed Start Number

Printed Stop Number

125 kHz Card Programming Information Format #

Field Name(s) e.g. Facility Code

Value

QTY

For Contact Smart Chip selection, refer to the Logical Access How to Order guide. Standard configuration does not include a contact smart chip module. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The Printed card number is placed in the bottom left-hand corner (125 kHz) and in the bottom right-hand corner (13.56 MHz) on the back of the card on Proximity Programming only. Permanent unique MIFARE DESFire 56 Bit serial # cannot be printed on cards. 4 For Laser Engraved Printed numbers, consult factory for lead times and cost. * The composite construction is recommended for all cards with over-laminate applied 1 2

Page 100 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

CP1000 ICLASS SE ENCODER iCLASS SE Encoder Summary The iCLASS SE Encoder Platform for encoding contactless credentials is: 

Dynamic - Support for a wide range of credential technologies, including iCLASS Seos, iCLASS SE, iCLASS, HID Prox, MIFARE Classic, and MIFARE DESFire EV1 from single encoder.



Flexible - Manage custom keys locally or leverage HID standard and Elite keys.



Convenient - On-site programming of card stock speeds up the delivery time to obtain and issue cards.



Seamless - Encode multi-tech credentials in a single pass, saving time and resources.

HID Global’s iCLASS SE Encoder is an ideal solution for organizations to encode credentials and configure readers. Highly versatile, the encoder can locally manage HID Global standard Keys, Elite Keys or securely define and manage custom keys. The dynamic iCLASS SE Encoder has the capability to encode and manage a wide variety of credential technologies, interoperable with iCLASS SE readers. The solution allows users to upgrade existing card populations for use with higher security iCLASS SE Platform readers. That same flexibility also supports new credential technologies as they arise. The iCLASS SE Encoder is available either as a desktop device as the CP1000D, or as an in-line encoder within a FARGO card printer. The in-line encoder enables organizations to graphically and electronically personalize 13.56 MHz and 125 kHz HID Prox cards in one seamless process, saving time and energy. This How to Order Guide will provide details for ordering credential credits, formats, and key for both the desktop and in-line encoder. Contact your local Fargo sales representative for in-line encoder information.

iCLASS SE Encoder - How Does it Work? The iCLASS SE Encoder solution is made up of following components: 

Hardware - Encoder is available in either a desktop or in-line printer form factor



Software - The encoder solution is compatible with two editions of Asure ID: 

Asure ID CP1000 Edition - This edition is included with the purchase of a desktop encoder (CP1000D) and is suitable for standalone desktop encoding. The solution enables data to be manually entered or to have it automatically increment after each encoded card.



Asure ID Exchange Edition - This edition is purchased separately and in addition to supporting the desktop encoder is the only edition which supports the in-line encoder. This solution can also connect to external databases in real-time when reading/encoding contactless cards.



Credential Credits - The encoder utilizes credential credits to enable the encoding of contactless cards. The solution will decrement a credential credit each time a card has been encoded. Each credential technology and security combination will utilize a specific credential credit type (i.e. iCLASS Seos card secured with an Elite key). Credential credit part numbers are allocated for Genuine HID or Third Party Credentials. The iCLASS SE Encoder is able to determine the source of the credential during the encoding cycle and will decrement the appropriate counter accordingly. Select encoder ready MIFARE Classic and MIFARE DESFire EV1 part numbers to avoid consuming a chargeable credit.



Formats - Utilizes pre-defined format templates, eliminating the need to understand access control formatting and card numbering schemes. HID formats can be ordered using this HTOG but approval may be needed for proprietary formats.



Keysets - Supports HID Elite, Standard, or Custom keys. Standard and HID Elite keys can be ordered using this HTOG but approval will be needed for HID Elite keys.

iCLASS SE Encoder Ordering Basics The iCLASS SE Encoder is available for sale without a renewable lease agreement since it utilizes a credential credit process to encode cards. Follow the 5 steps below to ensure the correct hardware,encoding and configuration card credits, programming format and keys are ordered. If at any time you require assistance, contact your local HID Global sales or pre-sales representative.

Step 1 Hardware

June 2019

Step 2

Step 3

Step 4

Step 5

Select Additional Credits

Select Additional Formats

Select Additional Keys

Complete Order Form

Page 101 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Step 1: Hardware Part Number: CP1000D Contains: 

USB Desktop Encoder



Installation Guide



USB Flash Drive containing: o Asure ID CP1000 Desktop Application o Configuration package (*.ise file) that contatins default credits, format H10301 (26-bit) and standard keys listed in the table below o User documentation The following credits, formats, and sample cards (included by default with every CP1000D) – if additional credits are needed, refer to Step 2 and add the required part numbers to the order form.



Credits Included Quantity

Part Number

Description

100,000

CRDT-K0

HID Prox Credential - Access Control

100,000

CRDT-A0

iCLASS Credential - Access Control

100,000

CRDT-A3

iCLASS SE Credential - Access Control

500,000

CRDT-A5

iCLASS (SE) Credential - Custom Data

30

CRDT-D3

iCLASS Seos Credential - Access Control

30

CRDT-D5

iCLASS Seos Credential - Custom Data

100,000

CRDT-B0

HID MIFARE Classic Credential - Access Control

100,000

CRDT-B3

HID MIFARE Classic Credential - Access Control (SIO)

500,000

CRDT-B5

HID MIFARE Classic Credential - Custom Data

100,000

CRDT-F5

Third Party MIFARE Classic Credential - Custom Data

100,000

CRDT-C3

HID MIFARE DESFire EV1 Credential - Access Control (SIO)

500,000

CRDT-C5

HID MIFARE DESFire EV1 Credential - Custom Data

100,000

CRDT-G5

Third Party MIFARE DESFire EV1 Credential - Custom Data

30

CRDT-J0

Configuration Card Generation

Formats Included Format H10301

Description 26-bit (Facility code range 0-255, ID range 0-65535)

Sample Cards Included Quantity

Part Number

Description

2

1386NGGNB

HID Prox

2

2000CGGNN and 2003CGGNN

iCLASS 2k and 32k

2

3000VGGNN and 3003VGGNN

iCLASS SE 2k and 32k

3

5005VGGNN

iCLASS Seos 16K

2

1430NGGNN and 1440NGGNN

MIFARE Classic 1K and 4k

2

1450CNGGNN

MIFARE DESFire EV1 8K

1

0501500295-READER

Reader Data Configuration Card (compatible with iCLASS SE Rev E)

1

0501500295-ELITE

HID Elite Prep Transport

1

2000PCCNN-LEGACY

iCLASS LegacyTransport

Page 102 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Step 2: Select Additional Credential Credits The iCLASS SE Encoder utilizes credential credits to enable the encoding of contactless credentials. Each credential technology, security combination and programming data will utilize a specific credential credit. Credits are loaded and strored in the CP1000D USB desktop encoder hardware. The iCLASS SE Encoder is able to determine the source of the credential during the encoding cycle and will decrement the appropriate credit counter accordingly. A reader compatibility list is provided for each credential credit table. Select encoder ready MIFARE Classic and MIFARE DESFire EV1 part numbers to avoid consuming a chargeable credit.

Genuine HID Technology Credential Credits – Part Tables What Credential Credits do I need? Select credits based on HID technology type and required programming. Some credits are chargeable, please refer to the current price list for details. Add the required part numbers to the order form.

Seos Technology

Key Type

Programming

Credit Part Number

Chargeable?

Seos

Standard

SIO

CRDT-D3

NO

Seos Seos

HID Elite1 Key Rolling

SIO N/A

CRDT-D4 CRDT-D6

YES NO

iCLASS Technology

Key Type

Programming

Credit Part Number

Chargeable?

iCLASS SE (V type) iCLASS SE (V type) iCLASS iCLASS iCLASS iCLASS /iCLASS SE

Standard HID Elite1 Standard HID Elite1 N/A Key Rolling

SIO SIO Standard Standard Custom Data N/A

CRDT-A3 CRDT-A4 CRDT-A0 CRDT-A1 CRDT-A5 CRDT-A6

NO YES NO YES NO NO

MIFARE CLASSIC Technology

Key Type

Programming

Credit Part Number

Chargeable?

MIFARE CLASSIC (V Type) Standard SIO* CRDT-B3 NO MIFARE CLASSIC (V Type) HID Elite1 SIO* CRDT-B4 YES MIFARE CLASSIC (V Type) Standard HID MIFARE CRDT-B0 NO MIFARE CLASSIC (V Type) N/A Custom Data CRDT-B5 NO MIFARE CLASSIC/ SIO for MIFARE Key Rolling N/A CRDT-B6 NO CLASSIC * Use encoder reader “V” type credentials only for SIO programming. Use of HID unprogrammed MIFARE CLASSIC cards will consume a chargeable third party credit. 125 kHz Technology HID Prox

Key Type N/A

Programming Standard

Credit Part Number CRDT-K0

Chargeable? NO

MIFARE DESFire Technology

Key Type

Programming

Credit Part Number

Chargeable?

MIFARE DESFire (V Type) Standard SIO* CRDT-C3 NO MIFARE DESFire (V Type) HID Elite1 SIO* CRDT-C4 YES MIFARE DESFire (V Type) N/A Custom Data CRDT-C5 NO MIFARE DESFire/ SIO for MIFARE Key Rolling N/A CRDT-C6 NO DESFire * Use encoder reader “V” type credentials only for SIO programming. Use of HID non-programmed MIFARE DESfire cards will consume a chargeable third party credit.

Configuration Card

Key Type

Programming

Credit Part Number

Chargeable?

SE Reader Configuration

N/A

Configuration Data

CRDT-J0

NO

1 Authorization

process.

June 2019

is required by the end user or owner of the HID Elite (formerly iCLASS Elite) keys before these can be released. Contact customer services for information on the authorization

Page 103 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Third Party HID Technology Credential Credits – Part Tables What Credential Credits do I need? Select credits based on the third party card technology. Most credits are chargeable but regional variations exist, , please refer to the current price list for details. Add the required part numbers to the order form. Note: Use of standard “N type” HID MIFARE Classic and MIFARE DESFire EV1 supplied cards will consume a chargeable credit. Order “V type” HID MIFARE Classic and MIFARE DESFire EV1 cards to avoid consuming a chargeable credit.

MIFARE CLASSIC Technology

Key Type

Programming

Credit Part Number

Chargeable?

MIFARE Classic

Standard

SIO

CRDT-F3

YES

MIFARE Classic

HID Elite1

SIO

CRDT-F4

YES

MIFARE Classic

Standard

HID MIFARE

CRDT-F0

See Price List

MIFARE Classic

N/A

Custom Data

CRDT-F5

See Price List

MIFARE DESFire Technology

Key Type

Programming

Credit Part Number

Chargeable?

MIFARE DESFire

Standard

SIO

CRDT-G3

YES

MIFARE DESFire

HID

Elite1

SIO

CRDT-G4

YES

MIFARE DESfire

N/A

Custom Data

CRDT-C5

YES

Reader Compatibility Table Credential Part Number

Reader Compatibility

CRDT-A0

iCLASS Rev A, B, C & iCLASS SE interpreter type “T” with keyset “0”

CRDT-A1

iCLASS Rev A, B, C & iCLASS SE interpreter type “T” and matching Elite ICE keyset

CRDT-A3, CRDT-B3, CRDT-C3, CRDT-D3, CRDT-F3, CRDT-G3, CRDT-H3

iCLASS SE readers only interpreter type “T” or “N” with keyset “0” or “2”

CRDT-A4, CRDT-B4, CRDT-C4, CRDT-D4, CRDT-F4, CRDT-G4, CRDT-H4

iCLASS SE readers only interpreter type “T” or “N” with matching Elite ICE keyset

CRDT-A5

iCLASS Rev A, B, C & iCLASS SE

CRDT-F0 CRDT-B0

HID 6055B, FlexSmart® 6071/6072, Smart ID 8030DSHM/8031DSHM (HID MIFARE Only) and specific models of iCLASS SE.

CRDT-B5, CRD-C5, CRDT-F5, CRDT-G5

iCLASS SE Migration readers only with matching custom key and mapper profile

CRDT-K0

HID Prox compatible readers including multiCLASS

1 Authorization

process.

is required by the end user or owner of the HID Elite (formerly iCLASS Elite) keys before these can be released. Contact customer services for information on the authorization

Page 104 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Step 3: Select Additional Formats The iCLASS SE Encoder supports a wide range of HID formats; by default every encoder is supplied with H10301, the HID open 26-bit format with full facility code and ID range. Use this section as a guide to order additional HID open/tracked, Corporate 1000 or OEM formats. Add the required part number and details to the order form.

Format Part Number

Format Type

FRMT-J1

HID open/tracked or OEM formats

FRMT-J2

HID Corporate 1000 formats

Tracked ID Number Ranges If you order a tracked format for example Corporate 1000, H10302 or H10304 the next available number range is automatically assigned. A limit of 10,000 ID numbers per order applies to H10302. Read Only If you have a requirement for format read-only functionality for example, to read the encoded format as part of the printing process, order the required format with a card ID range of one number. The availability of the format on the encoder provides read-only functionality for the entire format ID range and variable field values.

How to order FRMT-J1 (HID open, tracked or OEM format) Example 1: 

I want to order H10301 (HID open 26-bit with facility code and number range)



I want facility code 99



I want 500 numbers starting at 1,001 Part Number

Format Number

Field Name(s) e.g. Facility Code

Value

Start Number

Quantity

FRMT-J1

H10301

Facility Code

99

1,001

500

Example 2: 

I want to order H10304 (HID tracked 37-bit with reserved facility code)



I want facility code 99



I want 1,000 numbers (since H10304 is tracked, the next available numbers will be allocated) Part Number

Format Number

Field Name(s) e.g. Facility Code

Value

Start Number

Quantity

FRMT-J1

H10304

Facility Code

99

N/A

500

How to order FRMT-J2 (Corporate 1000 format) Example 

I want to order a Corporate 1000 format



I want 10,000 numbers (since Corporate 1000 formats are tracked, the next available numbers will be allocated)

Part Number

Format Number

FRMT-J2

H2004095

June 2019

Company ID Code Value 4095

Start Number N/A

Quantity 10,000

Page 105 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Step 4: Select Additional Keysets Key Management is a complex subject that requires some understanding of the various technologies and how smart card applications are managed. For example, encoding data on an iCLASS or MIFARE Classic card requires, at a minimum, a single authentication key to gain access to the application area or sector. The application data may have additional security enhancements requiring additional keys. The HID Application for example, requires two DES keys, one key for authentication to the app area and another key for encryption of the application data, while the Secure Identity Object (SIO) requires AES keys for encryption and signing the credential. Each technology will differ in terms of the keys that need to be created and managed. The iCLASS SE Encoder includes utilities for managing individual keys as well as grouping those keys into key sets for ease of deployment. To ensure your iCLASS SE Encoder is equipped with the correct keys it is necessary to order keysets appropriately. There are three classes of keysets available which are explained below.

Media Keyset Media keysets provide all the cryptographic keys necessary to set up and encode cards. The keys delivered with each part number will vary depending on the needs of the technology. For instance part number CKEYMED-ICL-0 will deliver the iCLASS media Keyset for accessing the HID application area, the encryption key for the PACS data, and the key for accessing the SE application area. If you are using HID Elite Credentials, the part number will be CKEYMED-ICL-1. Part number CKEYMED-MIF-n will deliver Key A and Key B for accessing the HID application on a MIFARE Classic card as well as transport keys for the MAD (MIFARE Application Directory). Part number CKEYMED-DES-n will deliver keys for accessing the HID application on a MIFARE DESFire EV1 card including the PICC master key, the application master key and the application read and write keys.

Reader Configuration Keyset The Reader configuration keyset provides the privacy and authentication keys necessary to create configuration cards. Typically, configuration cards are needed to push new keys and/or configuration data to the reader. In order to utilize this solution, programmable configuration card are needed to be ordered. Part numbers for these cards are: 

0501500295-READER - used for reader configuration



0501500295-ELITE - used for HID Elite key preparation.

SIO Keyset The SIO Keyset provides the privacy and authentication keys for HID's Secure Identity Objects. Because SIOs are independent of card technology, their keys are ordered separately.

Default Keysets The iCLASS SE Encoder is delivered with the following standard Keysets:

Keysets

Security

Credit Part Number

Seos Media Keyset

HID Standard

CKEYMED-SEOS-0

iCLASS Media Keyset

HID Standard

CKEYMED-ICL-0

MIFARE Classic Media Keyset

HID Standard

CKEYMED-MIF-0

MIFARE DESFire Media Keyset

HID Standard

CKEYMED-DES-0

Reader Configuration Keyset

HID Standard

CKEYCFG-0

SIO Keyset

HID Standard

CKEYSIO-0

Page 106 of 109

June 2019

Readers and Credentials How to Order Guide, PLT-02630, B.6

Additional HID Elite Keysets Select the appropriate additional HID Elite keyset to encode HID or third party credentials or generate configuration cards with an HID Elite key. All HID Elite keysets are free of charge, however a suitable HID Elite credential credit is required to encode credentials with an HID Elite key. Add the required part number to the order form.

Keysets

Security

Keyset Part Number

Chargeable?

Seos Media Keyset

HID Elite

CKEYMED-SEOS-1

NO

iCLASS Media Keyset

HID Elite

CKEYMED-ICL-1

NO

MIFARE Classic Media Keyset

HID Elite

CKEYMED-MIF-1

NO

MIFARE DESFire Media Keyset

HID Elite

CKEYMED-DES-1

NO

Reader Configuration Keyset

HID Elite

CKEYCFG-1

NO

June 2019

Page 107 of 109

Readers and Credentials How to Order Guide, PLT-02630, B.6

Step 5: Encoder Order Form Complete the order form and submit it to your local HID Global order processing team Hardware Part Number CP1000D

Description CP1000D USB encoder with H10301, standard keys and default credits

QTY

Existing CP1000 Serial Number – [Only required to order formats, credits and keysets for an existing encoder] Serial Number (found on underside of USB device or CP inside door/bottom of printer):

Additional Credits Part Number CRDTCRDTCRDTCRDTCRDT-

QTY

Additional Open, Tracked of OEM Formats1,2

Note: A limit of 10,000 numbers per order applies to format H10302

Part Number FRMT-J1

Format Number

Field Names

Value

ID Start Number

QTY

Part Number FRMT-J1

Format Number

Field Names

Value

ID Start Number

QTY

Part Number FRMT-J1

Format Number

Field Names

Value

ID Start Number

QTY

Additional Corporate 1000 Formats3,4 Part Number FRMT-J2 FRMT-J2 FRMT-J2

Format Number

Company ID Code

QTY

Additional HID Elite Media Keysets5 Part Number CKEYMEDCKEYMEDCKEYMED-

ICE Key # -1 -1 -1

QTY 1 1 1

Additional HID Elite Reader Configuration Keyset 6,7 Part Number CKCFGCKCFGCKCFG-

ICE Key # -1 -1 -1

QTY 1 1 1

1 OEM

formats required owner authorization, H10304 facility codes are registered to a specific account. Contact customer services for information on the authorization process. open formats such as H10301 and H10320 requires the customer to specify the required number range. HID does not track open formats. open, tracked formats such as H10302 and H10304 are tracked by HID, duplicates are not allowed. 4Authorization is required by the end user authorized contacts. Contact customer services for information on the authorization process. 5 Corporate 1000 number ranges ordered for the CP1000 will not be available for future physical card orders. 6,7 Authorization is required by the end user or owner of the HID Elite (formerly iCLASS Elite) keys before these can be released. Contact customer services for information on the authorization process. 2 HID 3 HID

Page 108 of 109

June 2019