Lubrication solutions for industrial applications

For further information see the Technical Data Sheets and the Material Safety Data Sheets. ... PRODUCT APPLICATIONS SPECIFIC ADVANTAGES ISO VG SPECIFI...

0 downloads 163 Views 3MB Size
Lubrication solutions for industrial applications

TOTAL Lubricants: our commitment

Specific products Each industrial sector has a specific operating environment. Our knowledge and experience of industrial applications means that our products are suited perfectly to your requirements. TOTAL lubricants offer a comprehensive range of oils, greases and special products for industries such as: chemicals, energy, iron and steel, metallurgy, metalworking, automotive, equipment manufacturers, mines, construction materials, papermaking and the food processing industry.

Innovative products

Total, a multinational energy company As the fifth largest publicly-traded integrated oil and gas company in the world* and a major actor in the chemicals business, Total has operations on five continents with approximately 97,000 employees. Total engages in all aspects of the petroleum industry, including Upstream operations (oil and gas exploration, development and production, LNG) and Downstream operations (refining, marketing and the trading and shipping of crude oil and petroleum products). Total also produces base chemicals (petrochemicals and fertilizers) and specialty chemicals for the industrial and consumer markets (rubber processing, adhesives, resins and electroplating).

Developing your productivity We are at your side to help you get the best of your machinery and to accompany your development at both local and international levels.

2

* based on market capitalization (in dollars) as of December 31, 2008.

 afe and environmentally-friendly S products We have made a commitment to safety, health and respect for the environment. Our R&D teams integrate from the initial design stage of new products parameters conducive to the reduction of toxicity risks and VOC emissions, biodegradability, recycling or elimination of the products.

High added value services

Total is helping to secure the future of energy by progressively expanding its energy offerings and developing complementary next generation energy activities (solar, biomass, nuclear). Total’s main challenges as an industrial company are to sustainably develop energy supply, ensure the safety of operations and reduce their environmental footprint, help fight against climate changes, respect and promote human rights, and contribute to the development of host countries.

Innovation is priority for us. We have several research centres, where chemical and mechanical engineers and specialists in tribology work together. Our close relations with equipment manufacturers enable the formulation and testing of tomorrow’s products, and guarantee optimal performance and protection of your machines.

Total Lubrifiants is ISO 9001:2000 and ISO/TS 16949:2002 certified. These certifications, renewable every 3 years, are the guarantee of our long-term commitment.

We bring our expertise to help you to optimize the productivity of your machinery and improve your competitiveness. You benefit from advices and high-level after-sales services that include: rationalization and organization of lubrication operations, maintenance and laboratory analyses of the fluids in service, training of your teams.

Proximity and reactivity We provide a local sales presence to answer your specific needs. In addition, our integrated organization and supply chain (our own refineries, lubricant blend plants and logistics platform) ensure your deliveries will be on-time. 3

ALTIS......................................................58 ANTIFOAM ............................................32 AXA ........................................................62 AZOLLA ...................................................8 AZOLLA NET HC .................................. 10 BIOHYDRAN ......................................... 10 BIOMERKAN.........................................62 BIOMOLDOL .........................................42 BIOMULTIS............................................62 BLUE CONCENTRATE .......................... 11 CALORIS ...............................................62 CARTER ........................................... 20-22 CERAN ............................................ 60-64 CIRKAN .................................................24 CONTRAM ............................................32 COOLELF ..............................................52 COPAL ............................................. 56-58 CORTIS ............................................ 24-26 CYL ........................................................26 DACNIS ................................................. 12 DIEL .......................................................30 DISOLA .................................................. 18 DRASTA .................................................38 DROSERA .............................................40 EBOTEC ................................................32 EMETAN ................................................46 EQUIVIS .............................................. 8-10 ETIRELF .................................................36 FINADET ................................................50 FINAROL ...............................................40 FINASOL................................................50 FINATUROL ...........................................46 FINAVESTAN .........................................46 FORMATIONS .........................................6 GLACELF...............................................52 GRANITCUT ..........................................48 HYDRANSAFE ...................................... 10 HYDROFLO .............................................8

IRONCAST.............................................36 ISOVOLTINE ..........................................52 JARYTHERM .........................................44 KASSILLA .............................................20 LACTUCA ..............................................32 LICAL .....................................................54 LUBIANA .................................................7 LUBRILAM ............................................36 LUNARIA ............................................... 12 LYRAN ...................................................46 MARSON ...............................................62 MARTOL .......................................... 34-36 MISOLA .................................................24 MOLDOL ......................................... 42-44 MULTIS ..................................................54 MULTIS COMPLEX...............................56 NATERIA ............................................16-18 NEVASTANE....... 8-10-12-20-22-44-50-64 ORITES .................................................. 18 OSYRIS ............................................ 38-40 PLANETELF .......................................... 12 PNEUMA ............................................... 14 PRESLIA ................................................ 16 PRIMERIA .............................................. 18 PV 100 ................................................... 14 SCILIA ....................................................30 SERIOLA................................................44 SPECIS ..................................................62 SPIRIT ....................................................32 STATERMIC ...........................................62 TIG XP5 ...................................................6 TORILIS .................................................48 VALONA........................................... 28-30 VULSOL .................................................32 WT SUPRA ............................................52

Index of applications Agrifood industry Air compressors ............................................12 Gas compressors ..........................................18 Gears ............................................................. 20 Greases ....................................................62-64 Heat transfer circuits .................................... 44 Hydraulic systems ..................................... 8-10 Refrigerating compressors ...........................12 Special products .......................................... 50 Vacuum pumps ..............................................14 Vegetable oils................................................ 46 White oils and vaselines ............................... 46 Air compressors ............................. 12 Antifreeze and coolants .................52 Biodegradable lubricants Concrete, clay, terracotta demoulding ....... 42 Gears ............................................................. 20 Greases ......................................................... 62 Insulating oil .................................................. 52 Hydraulic systems ........................................ 10 Metalworking - Microlubrication ................. 30 Clay and terracotta demoulding ....42 Cleaning of engines and machine parts ........................50 Concrete demoulding .....................42 Diesel engines for standby units ... 18 Elastomer demoulding ............. 42-44 Gas compressors ........................... 18 Gas engines ................................16-18 Gears ..............................................20 Mineral oils .................................................... 20 Special oils .................................................... 22 Synthetic oils ...........................................20-22 Greases ..........................................54 Biodegradable .............................................. 62 Complex Aluminium ...............................56-58 Complex Calcium Sulfonate ........................ 60 Complex Lithium ........................................... 56 Lithium Calcium ............................................ 54 NSF H1 for incidental food contact ............. 64 Polyurea ........................................................ 58 Special greases ............................................ 62

Hard material sawing .....................48 Heat transfer circuits .....................44 Hydraulic systems ............................8 Biodegradable fluids .................................... 10 Dye ..................................................................11 Detergent ...................................................... 10 Fire-resistant fluids ...................................... 10 High temperatures and pressures ................ 8 Low temperatures ..................................... 8-10 In-service oil analyses...................... 7 Insulating oils ..................................52 Metalworking ..................................28 Continuous casting ...................................... 36 Cutting: neat oils .....................................28-30 Cutting: soluble fluids .................................. 32 Cutting and lubrication: multipurpose oils ... 30 Electro-erosion fluids ................................... 30 Grinding and lapping oils ............................. 30 Lubrication of machine tools ....................... 40 Metal forming oils ....................................34-36 Microlubrication oils ..................................... 30 Prelubes ........................................................ 40 Protection oils ..........................................38-40 Quench oils .................................................. 38 Rolling oils ..................................................... 36

Index

Index of TOTAL products and services

Movements .....................................24 Circulation oils .............................................. 24 Circulation oils for papermaking machines ....................................................... 24 High temperature chain oils ......................... 26 Oils for steam engine cylinders ................... 26 Pneumatic systems ........................ 14 Process oils ....................................48 Refrigerating machine compressors .................................. 12 Software for maintenance and lubrication management ...........6 Training..............................................6 Turbines .......................................... 16 Vacuum pumps ............................... 14 White oils and vaselines .................46

Total Lubrifiants S.A. reserves the right to change without notice the formulation of its products, in order to improve their performances or adapt them to the legislation. We advise you to contact us for the choice of the product suitable to your operating environment. For further information see the Technical Data Sheets and the Material Safety Data Sheets.

4

5

Services - Assistance to lubrication

TIG XP5 Software for efficient management of your maintenance and lubrication operations  TIG XP5 software enables you to plan your lubrication and maintenance operations, and to keep very tight control of costs. • Organisation of preventive maintenance: planning of maintenance operations and tracking of their history. • Incorporation of conditional maintenance methods: oil analyses, vibration analyses, etc. • Organisation of corrective maintenance: triggering of repairs. • Direct importation of comments and results of ANAC analysis. •M  anagement of lubricant stocks and spare parts: consumption, orders, deliveries. •A  nalysis of complete maintenance costs: cost of lubricants, spare parts and labour. • Integrated document management. •P  ossibility of managing the maintenance of several sites. •S  oftware available in 13 languages. TIG XP5 • Management of preventive, conditional and corrective maintenance.

TIG XP5 is available in 3 versions in order to adapt to the specificities of other industrial sectors.

TIG XP5 FOOD dedicated to the agrifood industries. • TIG XP5 functionalities + Integrated management of the HACCP method of risk analysis. + Management of the NSF H1 registered lubricants, designed for incidental contact with food. TIG XP5 METALWORKING dedicated to the metalworking industries. • TIG XP5 functionalities + Monitoring of the quality of the soluble oil sumps by triggering and storage of the measurement readings (concentration, pH, proportion of bacteria, …). + Module dedicated to the management of top-ups: history and calculation of top-ups. + Management of cutting tools: analysis of the service life depending on the concentrate used and its concentration rate.

ANAC INDUS Oil analyses to anticipate and diagnose anomalies in the production chain  il is the pointer to the health of your machines. O For this reason the quality and precision of the ANAC INDUS analyses provide tangible benefits as regards productivity gains and reduced maintenance and lubrication costs: • Surveillance of the machine mechanical state and of the lubricant residual qualities, without dismounting or stoppage. • Detection of anomalies: premature wear of a machine part, pollution (water, mixture of products, solid pollutants, dust, …). • Optimization of the lubricant use by an increase in the oil drain intervals. A PERSONALIZED DIAGNOSIS OF YOUR OILS IN SERVICE • Analysis grids adapted to the various families of industrial oils: - CLASSIC: general analysis for industrial oils, hydraulics, bearings, compressors and gears. - TURBINE: turbine oils. - FRIGO: refrigerating machine compressors oils. - TRANSFO: transformer oils. - CALO: heat transfer oils. - TREMPE: quench oils. - HFC: HFC-type non-inflammable hydraulic oils. - PARTIC: counting of particles in order to determinate the sort of pollution. - SOLUBLE: soluble cutting fluids.

Services - Assistance to lubrication

Proper organisation of maintenance and regular monitoring of the state of your machines guarantee optimal availability of your production tool and enable significant reductions in maintenance costs. For this reason Total has developed the TIG XP5 software and the in-service oil analyses known as ANAC INDUS.

• Optional analyses linked to a grid: - VI: determination of the viscosity index. - OPTIC: microscopic analysis defining the nature and relative size of solid particles. - AIR: determination of the foaming and air release values. A QUICK AND SECURE ACCESS TO YOUR OIL ANALYSIS The ANAC website offer a personalized and safe access to your oil analysis results : • Look up the results immediately after the analysis is completed. • Download the diagnosis history, so as to monitor changes. • Transfert directly the results and comments in the TIG XP5 software, in order to plan your maintenance operations.

TRAINING Programs of discovery and improvement to make good use of  ompetitiveness, safety of the installations, the health of people and respect for the environment are major C challenges for all industries. The lubricant plays a major role in all these fields: when it is properly used, it contributes to the performance and longevity of the production tools, to the safety of goods, to the health of its users and to the protection of the environment. For this reason Total offers training to users of its lubricants. Every training is adapted to each industrial sector.

6

industrial lubricants  opics: the use of industrial lubricants, safety and the environment T • controlling and identifying … means better lubrication, • knowledge and understanding … means reducing dangerousness, • applying and choosing … means limiting environmental risks. Each program is put within a framework of a convention subject to vocational training.

7

Hydraulic systems

• HFA, HFC, HFD classes: HYDRANSAFE. Fluids specifically developed to limit the risks of a fire spreading in the event of a leak. The NEVASTANE range is specially designed for the agrifood industry and its related activities such as the manufacture of packaging. It is also used in the pharmaceutical and the cosmetics industry. All NEVASTANE products are NSF H1 registered. Their use is essential when a high level of hygiene is required, in compliance with HACCP method. As high-performance products, they provide equipment protection and extended service life while securing the production chain. NEVASTANE hydraulic fluids are available in HM and HV class.

HM HYDRAULIC FLUIDS: FOR HIGH TEMPERATURES AND PRESSURES PRODUCT AZOLLA ZS

APPLICATIONS

SPECIFIC ADVANTAGES

ISO VG

SPECIFICATIONS ISO 11158 HM • DIN 51524-2 HLP

• Hydraulic systems operating in high temperature and pressure conditions. • Bearings and miscellaneous devices.

Reinforced protection of the equipment thanks to anti-wear and anticorrosion properties. Considerable service life for the fluid and preventing deposits, ensured by thermal stability and resistance to oxidation. Filterability even in the presence of water.

22 to 150

• Hydraulic systems especially sensitive to the formation of deposits and/or operating in high temperature and pressure conditions. • Bearings and miscellaneous devices.

Formation deposits prevented due to ashless additives. Very good anti-wear and thermal stability performances. Very good filterability in service even in the presence of water. Extension of oil drain intervals. TOST = 4000 hours.

22 to 100

• All hydraulic systems, in particular when the presence of water is inevitable and the draining of water impossible. • Miscellaneous devices calling for extreme-pressure properties.

Excellent hydrolysis stability thanks to ashless additives. Detergent fluid preventing deposits in the circuits. Reinforced extreme-pressure properties.

10 to 100

AZOLLA AL

• Hydraulic systems of aluminium, stainless steel or copper rolling mills.

Synthetic oil avoids staining rolled metal in the event of a leak in the hydraulic circuit. Reduction in the formation of deposits. Anticorrosion protection even in the presence of water.

15 to 68

AZOLLA VTR

• Hydrokinetic transmissions and couplings. • Specially designed for turbo-transmissions, Voith Turbo gear boxes.

Dispersant and detergent fluid limiting deposits. Very good load capacity (FZG>12) and anti-wear protection. Thermal stability. Very low foaming.

• Hydraulic systems operating under severe conditions.

Very good equipment protection power. Lengthening of the service life of the equipment. Miscibility with mineral fluids.

AZOLLA AF

AZOLLA DZF

NEVASTANE AW

Eaton I-286S, M-2950S • Cincinnati-Milacron P68, P69, P70 • Denison HF0, HF1, HF2 ISO 11158 HM • DIN 51524-2 HLP Eaton I-286S, M-2950S • Cincinnati-Milacron P68, P69, P70 • Denison HF0, HF1, HF2 • GM LS2 • SEB 181222

Hydraulic systems

TOTAL hydraulic fluids meet the requirements of international standards and manufacturers’ technical specifications. Our ranges of products correspond to the classifications of the ISO 6743-4 standard: • HM class: AZOLLA. Mineral fluids with good oxidation stability ensuring anticorrosion and anti-wear protection of the equipment. • HV class: EQUIVIS and HYDROFLO. HM properties complemented by a high viscosity index, for use of the fluid over a wide temperature range that permits start-ups at low temperature. • HETG, HEES classes: BIOHYDRAN. Biodegradable fluids recommended for equipment used in sensitive natural areas so as to limit the impact of incidental discharges on the environment.

ISO 11158 HM • ISO 12925 CKC • DIN 51524-2 HLPD Müller Weingarten • MAN N698 HLPD

32

-

ISO 6743-4 HM • DIN 51524 HLPD Voith Turbo • SNCF

22 to 68

NSF H1 • Kosher ISO 6743-4 HM • ISO 21469

HV HYDRAULIC FLUIDS: FOR LOW TEMPERATURES PRODUCT EQUIVIS ZS

8

APPLICATIONS • Hydraulic systems operating outdoors.

SPECIFIC ADVANTAGES Extension of oil drain intervals due to very good thermal stability and resistance to oxidation. Very good filterability even in the presence of water.

EQUIVIS XV

• Hydraulic systems operating at low temperatures as far down as -30 °C.

Protection of equipment due to a viscosity index > 250, ensuring limitation of cavitation phenomena in the circuits during start-up phases and maintenance of the thickness of the hot oil film.

EQUIVIS XLT

• Hydraulic systems operating at extremely low temperatures as far down as -40 °C.

Enhanced protection due to a viscosity index of 350. Prevention of deposits due to ashless additives. Filterability properties even in the presence of water. Considerable service life of the fluid. TOST = 4000 hours.

NSF H1, suitable for incidental food contact

ISO VG

SPECIFICATIONS

15 to 100

ISO 11158 HV • DIN 51524-3 HVLP Vickers • Cincinnati-Milacron P68, P69, P70

32 46

ISO 11158 HV • DIN 51524-3 HVLP

15 to 32

ISO 11158 HV • DIN 51524-3 HVLP

9

Hydraulic systems HV HYDRAULIC FLUIDS: FOR LOW TEMPERATURES

APPLICATIONS

HYDROFLO CT

• Hydraulic systems operating outdoors

HYDROFLO FE

• Hydraulic systems operating outdoors.

NEVASTANE SL

SPECIFIC ADVANTAGES Top-of-the-range hydraulic fluid. Optimal protection and performance of the equipment. Lengthening of oil drain intervals. Blue coloring enabling detection of possible leaks in the circuit.

• Hydraulic systems and especially those operating at low temperatures.

ISO VG

SPECIFICATIONS

46

ISO 11158 HV • DIN 51524-3 HVLP Poclain • Denison HF0

Top-of-the-range hydraulic fluid. Enhanced wear protection and hydraulic equipment efficiency at high operating temperature. Excellent oxidation stability for a longer service life of the fluid.

32 to 68

High-performance product, due to its 100% synthetic composition. Excellent protection of equipment. Lengthening of oil drain intervals.

32 to 100

ISO 11158 HV • DIN 51524-3 HVLP CM P68-P69-P70 Homologation DENISON HF0 NSF H1 • Kosher ISO 6743-4 HV • ISO 21469

BIODEGRADABLE HYDRAULIC FLUIDS PRODUCT

NATURE

APPLICATIONS

SPECIFIC ADVANTAGES

ISO VG

SPECIFICATIONS

BIOHYDRAN FG

Biodegradable Vegetable esters, suitable for incidental contact with food

• Hydraulic systems operating outdoors. • Operating temperatures: -20 °C to +70 °C.

Reinforced protection and efficiency of equipment. Excellent anti-wear properties.

BIOHYDRAN TMP

Biodegradable Synthetic esters

• Hydraulic systems operating outdoors. • Optimal operating temperatures: -20 °C to +80 °C.

Excellent protection against wear and corrosion. Protection and efficiency of equipment. Miscible with mineral oils.

32 to 100

ISO 15380 HEES European Ecolabel

BIOHYDRAN SE

Biodegradable Saturated synthetic esters

• Hydraulic systems operating outdoors. • Operating temperatures likely to exceed +80 °C.

Lengthening of oil drain intervals thanks to high thermal stability.

32 to 68

ISO 15380 HEES European Ecolabel

46

NSF H1 ISO 15380 HETG

Hydraulic systems

PRODUCT

FIRE-RESISTANT HYDRAULIC FLUIDS PRODUCT

NATURE

APPLICATIONS

SPECIFIC ADVANTAGES

ISO VG

SPECIFICATIONS

HYDRANSAFE HFAE

Concentrate soluble in water

• Hot pressing machines and systems specially designed for low-viscosity aqueous fluids. • Operating temperatures: +5 °C to +55 °C.

Generation of a stable non-inflammable emulsion. Filterability properties. Resistance to bacterial development.

-

ISO 6743-4 HFAE • ISO 12922

HYDRANSAFE HFA S1

Synthetic concentrate soluble in water

• Hot pressing machines and systems specially designed for low-viscosity aqueous fluids. • Operating temperatures: +5 °C to +55 °C.

Generation of a stable non-inflammable solution. Excellent filterability properties. High resistance to bacterial development.

-

ISO 6743-4 HFAS • ISO 12922

HYDRANSAFE HFC 146

Ready to use

• Operating temperatures: -20 °C to +60 °C.

Non-inflammable fluid containing a high proportion of water. Adapted to low temperatures.

46

ISO 6743-4 HFC • ISO 12922

• Recommended in the event of incidental leaks into the environment. • Operating temperature: -10 °C to +70 °C on a continuous basis, +120 °C at peak periods.

Excellent fire resistance. Ultimate biodegradability (OECD 301B). Excellent anti-wear properties. Miscible with mineral oils.

46 68

ISO 6743-4 HFDU • ISO 12922

HYDRANSAFE HFDU

Ready to use

Danieli • Müller Weingarten

Factory Mutual • Danieli

HYDRANSAFE FRS

Ready to use

• Operating temperature: -10 °C to +70 °C on a continuous basis, +150 °C at peak periods.

Excellent fire resistance. Absence of deposits. Protection against corrosion.

32 46

ISO 6743-4 HFDR • ISO 12922

HYDRANSAFE FR NSG 38

Ready to use

• Hydraulic monitoring and regulation systems for steam turbines. • Operating temperature: -10 °C to +120 °C.

Excellent fire resistance. Oxidation resistance.

46

ISO 6743-4 HFDR • ISO 12922 GEC Alstom - SBV PR 1001C • ABB - HTGD 690 149 V0001K • Siemens KWU - TLV 9012 02 • EDF PMUC • Westinghouse • GE - GEK 46357F

SERVICE PRODUCTS AZOLLA NET HC: Detergent additive to be added to the hydraulic fluid for cleaning of the hydraulic systems prior to oil drain.

10

Biodegradable

NSF H1, suitable for incidental food contact

BLUE CONCENTRATE: Blue dye for hydraulic fluids and other mineral lubricants, enabling early detection of leaks.

11

REFRIGERATING COMPRESSORS Depending on the type of cooling agent, LUNARIA and PLANETELF fluids are designed to match broad usage conditions. In all cases, they ensure lubricity performances as well as: • Anti-wear and anti-foaming properties.

PRODUCT

NATURE

APPLICATIONS

• Low formation of deposits. • Excellent thermal and chemical stability. • Return of the lubricant to the compressor.

SPECIFIC ADVANTAGES

ISO VG

SPECIFICATIONS

LUNARIA EFL

Synthetic PAG endcapped

• Automotive air conditioning systems, heat pumps and industrial refrigeration using CO2.

Specific for CO2 applications.

46 to 100

ISO 6743-3 DRF

LUNARIA FR

Naphthenic mineral

• Refrigerating compressors using CFC, HCFC and NH3 as a refrigerant.

Evaporating temperature > -15 °C.

32 to 100

ISO 6743-3 DRA

• Refrigerating compressors using NH3/ammonia.

Evaporating temperature > -30 °C.

LUNARIA NH

LUNARIA SH

Hydrocracked mineral

Synthetic PAO

• Refrigerating compressors using NH3/ammonia.

APV • Bock • Bitzer • Gram • Carrier • Grasso • Howden • J & E Hall • Sabroe • York

Evaporating temperature > -50 °C.

46 68

ISO 6743-3 DRA

46 68

NSF H1 ISO 6743-3 DRA

APV • Gram • Bock • J & E Hall • Grasso • Howden • Sabroe • York

APV • Gram • Bock • J & E Hall • Grasso • Howden • Sabroe • York LUNARIA SK PLANETELF ACD

Synthetic alkyl benzene Synthetic POE

• Refrigerating compressors using CFC or HCFC refrigerants.

Evaporating temperature > -60 °C.

• Refrigerating compressors using HFC refrigerants.

Evaporating temperature > -60 °C.

55 to 150

ISO 6743-3 DRE APV • Bitzer • Bock • Sabroe • York • RefComp

32 to 220

Compressors and pneumatic equipment

Compressors and pneumatic equipment

ISO 6743-3 DRD Aerzen • Bock • Frascold • Grasso • Howden • Sabroe • Sulzer • York

AIR COMPRESSORS DACNIS oils are formulated in accordance with manufacturers’ requirements to optimise the efficiency of air compressors. • Oil drain intervals ranging from 2000 hours to as much as 8000 hours, in normal conditions of functioning. • Protection against wear and corrosion. • Absence of carbonaceous deposits, even at high temperatures. • Effective oil/air and oil/condensates separation.

PRODUCT

12

NATURE

APPLICATIONS

The NEVASTANE range is specially designed for the agrifood industry and its related activities such as the manufacture of packaging. It is also used in the pharmaceutical and the cosmetics industry. All NEVASTANE products are NSF H1 registered. Their use is essential when a high level of hygiene is required, in compliance with HACCP method. As high-performance products, they provide equipment protection and extended service life while securing the production chain.

SPECIFIC ADVANTAGES

VISCOSITY*

SPECIFICATIONS

DACNIS

Mineral

• Rotary and reciprocating air compressors.

Oil drain interval 2000 hours.

32 to 150

Grades 32 to 68: ISO 6743-3 DAH • ISO DP 6521 Grades 100 and 150: ISO 6743-3 DAB • DIN 51 506 VDL Bauer • CompAir • Dresser-Rand • Sauer & Sohn • Sulzer Burckhardt…

DACNIS LD

Hydrocracked mineral

• Rotary screw-type air compressors.

Oil drain interval 4000 hours. Low pour point.

32 to 68

ISO 6743-3 DAJ • ISO DP 6521 • DIN 51 506 VDL Atlas Copco • CompAir • Hydrovane • Dresser-Rand…

DACNIS SH

Synthetic PAO

• Rotary screw-type air compressors.

Oil drain interval 8000 hours. Very low pour point.

32 to 100

ISO 6743-3 DAJ • ISO DP 6521 Atlas Copco • Hydrovane • CompAir • Dresser-Rand…

DACNIS SE

Synthetic ester

• High-pressure reciprocating air compressors, rotary compressors and turbocompressors.

High thermal stability. Low pour point.

46 to 100

ISO 6743-3 DAJ • DIN 51 506 VDL Atlas Copco • Bauer • CompAir • Dresser-Rand • Sauer & Sohn • Tanabe…

NEVASTANE SL

Synthetic PAO

• Air compressors. • Adapted to the severe environment of the agrifood industries.

Very high equipment protection level, even under severe conditions.

32 to 100

NSF H1 • Kosher ISO 6743-6 CKC • ISO 6743-4 HV • ISO 21469

NSF H1, suitable for incidental food contact

* Typical kinematic viscosity at 40 °C in mm²/s

13

VACUUM PUMPS PV 100 oils are destined for the lubrication of rotary and reciprocating vacuum pumps. Their performance over time is guaranteed by the properties of the fluid: • Less consumption of fluid due to low volatility

PRODUCT

NATURE

• Achievement of ultimate vacuum of the pumps, ensured by the low saturating vapour pressure of the lubricant. • Constant tightness due to the very low variation of viscosity during the entire oil service life. • Absence of formation of a degradation product due to excellent oxidation resistance.

APPLICATIONS

SPECIFIC ADVANTAGES

VISCOSITY*

SPECIFICATIONS

PV 100

Mineral

• Vacuum pump. • Extraction of neutral gas.

-

125

ISO 6743-3 DVC

PV 100 PLUS

Mineral

• Vacuum pump. • Extraction of moist air.

-

125

ISO 6743-3 DVC

PV SH 100

Semi-synthetic

• Alternating and rotary vacuum pump. • Extraction of acid or corrosive gases.

Suitable for incidental food contact.

100

NSF H1 ISO 6743-3 DVD

PNEUMATIC SYSTEMS PNEUMA oils guarantee the performance of pneumatic equipment and enable reduced fluid consumption. • Excellent resistance to shocks due to the extreme-pressure additives and good anti-wear protection. • Water-repellent and antirust properties.

PRODUCT

14

NATURE

APPLICATIONS

• Adhesiveness and tacky character, preventing pollution by oil mist.

SPECIFIC ADVANTAGES

PNEUMA

Mineral

Pneumatic tools: pneumatic shock engines, line lubricators or pulverisers for hammer drills.

Possible use in confined atmosphere: galleries, tunnels.

PNEUMA SY

Synthetic

Soundproof pneumatic shock equipment.

Anti-icing. Use at very low temperature.

NSF H1, suitable for incidental food contact

VISCOSITY* 46 to 150 17

SPECIFICATIONS

Compressors and pneumatic equipment

Compressors and pneumatic equipment

ISO 6743-11 P -

* Typical kinematic viscosity at 40 °C in mm²/s

15

TURBINES PRESLIA oils are designed for the lubrication of gas, steam and combined-cycle turbines. Their formulation stems from long experience and meets manufacturers’ severest specifications.

Product PRESLIA

PRESLIA GT

PRESLIA SE JET

NATURE Mineral

Chief applications • Steam and gas turbines.

Hydrocracked mineral

Synthetic ester

• Steam and gas turbines, and combined-cycle turbines.

• Aero-derivative turbines.

• Excellent resistance to oxidation permitting longer oil drain intervals. • Foaming, air release and demulsification behavior, ensuring proper facility operations. • Specific anti-wear and extreme-pressure additives that enable the gearing to withstand high loads.

Specific advantages

ISO VG

Specifications

Very good foarming, air release and demulse properties. High level of protection against oxidation.

32 to 100

Very high resistance to oxidation. Reinforced anti-wear and extreme-pressure additivation. Longer oil drain intervals.

32 46

ISO 6743-5 TSA/TSE/TGA/TGB/TGE/TGSB/TGSE

Excellent resistance at high temperatures.

32 46

MIL-PRF-23699F

ISO 6743-5 TSA/TSE/TGA/TGB/TGE/TGSB Alstom HTGD 90117 (formerly ALSTOM NBA P 50001A) • General Electric GEK 28143 B, GEK 32568 F, GEK 27070, GEK 46506 D • MAN Energie ME-TTS 001/18/92 • MAN Turbo SPD 10000242284 • Siemens TLV 901304 • Škoda turbíny Plzen • Solar ES 9-224 W Class II Alstom HTGD 90117 (formerly ALSTOM NBA P 50001A) • General Electric GEK 28143B, GEK 32568F, GEK 107395A, GEK 101941A, GEK 27070, GEK 46506 D • MAN Energie ME-TTS 001/18/92 • MAN Turbo SPD 10000242284 • Siemens TLV 901304 • Škoda turbíny Plzen • Solar ES 9-224 W Class II Allison Rolls Royce (USA) • General Electric • Rolls Royce (UK) • Turbomeca

Turbines, engines and gas compressors

Turbines, engines and gas compressors

GAS ENGINES NATERIA lubricants are detergent oils for gas engines and motor-compressors running on all types of fuel, from natural gas to highly corrosive landfill gas. As a result of long experience, the formulation of NATERIA lubricants complies with manufacturers’ requirements by ensuring maximum engine protection.

Product

16

NATURE

Applications

• Longer oil drain intervals due to substantial reserve alkalinity. • Thermal stability, resistance to oxidation and nitration. • Considerable anti-wear and anticorrosion properties. • Detergent and dispersant capacities that reduce the formation of deposits.

Specific advantages

SAE Grade

Specifications

NATERIA MH

Mineral Ash content < 0.5% TBN: 5.5

• Natural gas engines, used or otherwise in cogeneration.

Long life oil. Compatibility with catalytic converters.

40

Caterpillar: series 3500 • MWM (DEUTZ): sulphate ash content up to 0.5 wt.% • Perkins: 4000 • Waukesha: APG 220 GL • Wärtsilä: 220 SG • MDE: 28XX, 30XX • MTU: natural gas

NATERIA MJ

Mineral Ash content < 1% TBN: 8.8

• Natural gas and biogas engines: purification stations, liquid manure, landfill sites.

Long life oil. Strengthened detergency.

40

GE Jenbacher: Technical Instruction 1000-1106 • MDE: 28XX, 30XX • MAN 3721-2: All types • MWM (Deutz): sulphate ash content from 0.5 to 1.0 wt.% • MTU: biogas

NATERIA MP

Mineral Ash content < 0.5% TBN: 5.5

• Natural gas engines, operating under severe conditions.

Very long life oil. High-performing under severe conditions.

40

NATERIA X 405

Synthetic Ash content < 0.5% TBN: 5.2

•N  atural gas engines, operating under severe conditions.

Extra long life oil. Increased yield due to very inconsiderable formation of deposits on the heat exchanger tubes.

40

Wärtsilä: 220 SG, 25 SG, 28 SG, 34 SG, 32 DF, 50 DF • Waukesha: APG 220 GL

NATERIA ML 406

Mineral Ash content < 1% TBN: 6.1

• Landfill gas engines with a controlled H2S content.

Long life oil. Neutralization of the acid compounds contained in the gas.

40

GE Jenbacher: Technical Instruction 1000-1105

NATERIA V

Mineral Ashless

• 2-stroke and 4-stroke gas engines and motor-compressors.

Compatibility with catalytic converters.

40

MIL-L-2104A Clark • Cooper-Bessemer • Ingersoll-Rand KVS

17

DIESEL ENGINES FOR STANDBY UNITS PRODUCT DISOLA SGS

NATURE Detergent mineral

APPLICATIONS • Diesel engines for standby units: hospitals, nuclear power plants, off shore units.

SPECIFIC ADVANTAGES

SAE GRADE

Safe for emergency start-ups at full power. Excellent internal protection of the engine during shutdown periods due to anticorrosion additives.

40

SPECIFICATIONS MIL-L-2104 C • MIL-L-21260 C EDF PMUC

GAS COMPRESSORS PRIMERIA and ORITES oils are designed for the lubrication of gas compressors and hyper-compressor cylinders. PRIMERIA LPG meets the constraints relating to the compression of hydrocarbon gases, including refrigeration applications. ORITES TN 32 is a turbine quality mineral oil adapted to the lubrication of ammonia synthesis turbo-compressors. ORITES DS, TW and EDA products are specifically formulated for hyper-compressor cylinders and satisfy the principal regulations in force for the production of polymers.

PRODUCT

APPLICATIONS

SPECIFIC ADVANTAGES

VISCOSITY*

SPECIFICATIONS

PRIMERIA LPG 150

Synthetic PAG

• Hydrocarbon gas compressors.

Resistant to dilution by hydrocarbon gases. Excellent chemical stability.

150

ISO 6743-3: DGC Sulzer-Burckhardt • Howden • Aerzen

ORITES TN 32

Mineral

• Ammonia synthesis gas turbo-compressors.

Prevents formation of deposits. Compatibility with elastomers and the usual metals. Low sulphur content.

32

Dresser-Rand • Thermodyn • Creusot-Loire • Rateau

ORITES DS 125

Synthetic PAG

• Gas compressor cylinders.

Resistance to dilution by hydrocarbon gases.

125

ISO 6743-3: DGC Sulzer-Burckhardt

ORITES DS 270

Synthetic PAG

• Hyper-compressor cylinders. • For the production of polyethylene.

Excellent lubricity.

270

NSF H1

ORITES DS 270 A

• Hyper-compressor cylinders. • For the production of polyethylene.

Reduces the formation of deposits.

ORITES DS 270 X

• Hyper-compressor cylinders. • For the production of EVA.

Resistant to corrosion.

• Hyper-compressor cylinders. • For the production of polyethylene and the synthesis of ammonia.

Excellent lubricity.

ORITES TW 220 X

• Hyper-compressor cylinders. • For the production of EVA.

Resistant to corrosion.

ORITES EDA 220

• Hyper-compressor cylinders. • For the production of EDA.

Excellent lubricity.

ORITES TW 220

18

NATURE

White oils and synthetic PAG oils provide to these products: • Excellent solvent power and anti-wear properties. • Long linings service life. • Very good high pressure behaviour. • Very high pump-ability level.

White oil

NSF H1, suitable for incidental food contact

Turbines, engines and gas compressors

Turbines, engines and gas compressors

ISO 6743-3: DGC • EU 2002/72/EC Burckhardt Compression

220

ORITES TW 220 is ISO 21469 certified

ORITES EDA 220 is ISO 21469 certified

* Typical kinematic viscosity at 40 °C in mm²/s

19

Gears

CARTER, KASSILA and NEVASTANE oils are designed for the lubrication of gears. Numerous parameters need to be taken into account when choosing a gear lubricant: • The type of gear: dimensions, metallurgy of the toothing, sliding characteristics and speed reducing ratio, open or closed casing. • The operating conditions: depending on load, vibration and shock levels, the anti-wear and extreme-pressure properties determine the choice of lubricant. • The temperature of oil in service: very low, moderate between +20 °C and +80 °C, hot at more than +80 °C, and extreme temperature exceeding +120 °C. • The impact of the lubricant on the environment of the gear, in the event of leakage: biodegradability properties, suitability for incidental food contact or non-staining are necessary.

• The impact of the environment of the gear on the lubricant: in order to prevent corrosion and shorter fluid life due to humidity, dust or other elements, certain oils offer reinforced anticorrosion properties. • The conditions of maintenance: a synthetic fluid offering a long oil drain interval and guaranteeing proper operating safety makes significant savings in maintenance costs. The NEVASTANE range is specially designed for the agrifood industry and its related activities such as the manufacture of packaging. It is also used in the pharmaceutical and the cosmetics industry. All NEVASTANE products are NSF H1 registered. Their use is essential when a high level of hygiene is required, in compliance with HACCP method. As high-performance products, they provide equipment protection and extended service life while securing the production chain.

MINERAL GEAR OILS NATURE

APPLICATIONS

SPECIFIC ADVANTAGES

ISO VG

SPECIFICATIONS

CARTER ST

Mineral

• Industrial gears, bearings under high loads and moderate oil temperatures.

Superior protection of gears and bearings due to reinforced extreme-pressure performances. Anticorrosion protection.

150 to 680

ISO 12925-1 CKC • DIN 51517-3 CLP

CARTER EP 68 - 1000

Mineral

• Industrial gears, bearings under high loads and high temperatures.

Extension of oil drain intervals. Protection against micropitting.

68 to 1000

ISO 12925-1 CKD • DIN 51517-3 CLP • AGMA 9005-E02 EP U. S. Steel 224 • Flender

NEVASTANE EP CARTER XEP

KASSILLA GMP

White

• Gears, gear pumps, chains and conveyor belts.

Mineral Top tier

Mineral

Superior protection under high loads. Adapted to a wide range of applications.

100 to 1000

• Gears under high loads, high temperatures and difficult environments. • Gears for wind power engines.

Extended oil service life due to excellent thermal stability. Reinforcement of anticorrosion protection. Very good protection of bearings. Excellent protection of toothing against micropitting.

150 to 680

• Industrial gears under very high loads and repeated shocks. • Adapted to severe conditions: cement plants, iron and steel industry, mines, crushing…

Very good thermal stability. Reinforced protection against corrosion and micropitting. Contains graphite and molybdenum disulphide.

150 to 1000

ISO 12925-1 CKD • DIN 51517-3 CLP • AGMA 9005-E02 EP

ISO VG

SPECIFICATIONS

Gears

PRODUCT

NSF H1 • Kosher ISO 6743-6 CKC • ISO 21469 ISO 12925-1 CKD • DIN 51517-3 CLP • AGMA 9005-E02 EP U. S. Steel 224 • FAG • Flender

SYNTHETIC GEAR OILS PRODUCT CARTER SH

20

NATURE Synthetic PAO

APPLICATIONS

SPECIFIC ADVANTAGES

• Gears subjected to very high loads and high temperatures in difficult environments. • Gears for wind power engines.

Excellent protection against corrosion, wear and micropitting. Extended oil service life due to excellent thermal stability. Can operate outdoors thanks to a very low pour point.

150 to 1000

ISO 12925-1 CKD • DIN 51517-3 CLP Flender • FAG • SKF

CARTER BIO

Synthetic ester

• Gears offering a risk of incidental discharges into the environment.

Biodegradable product. Very good extreme-pressure, anti-wear and anticorrosion properties. Oxidation stability.

150 to 460

Equivalence ISO 12925-1 CKD • DIN 51517-3 CLP

CARTER SY

Synthetic PAG

• Industrial transmissions with a high slip rate. • Spur gears and worm screws. • Gears operating at very high temperatures. • Non-miscible with mineral oils and certain synthetic lubricants.

Reinforced extreme-pressure properties. Very good thermal stability, good anticorrosion protection. Very low foaming.

150 to 680

ISO 12925-1 CKD/CKT • DIN 51517-3 CLP

NSF H1, suitable for incidental food contact

Biodegradable

21

Gears SYNTHETIC GEAR OILS

PRODUCT NEVASTANE SL

NEVASTANE SY

NATURE Synthetic PAO

Synthetic PAG

APPLICATIONS

SPECIFIC ADVANTAGES

• Severe temperature conditions and high loads. • Gears, slideways, plain bearings and (roller) bearings.

Excellent level of equipment protection. Extension of oil drain intervals. Extended equipment service life.

• Severe temperature conditions and high loads. • Oven chains and conveyor belts, bottling equipment, wheels and worm screws. • Non-miscible with mineral oils and certain synthetic lubricants.

Reinforced extreme-pressure properties. Very good thermal stability. Anticorrosion protection.

ISO VG 100 to 460

SPECIFICATIONS NSF H1 • Kosher ISO 6743-6 CKC • ISO 21469

220 320 460

NSF H1

SPECIAL OILS

22

NATURE

APPLICATIONS

SPECIFIC ADVANTAGES

ISO VG

SPECIFICATIONS

CARTER EP 1500, 2200, 3000

Semi-synthetic

• Slow gears. • In particular, oven rings and crusher trains.

Great load capacity thanks to excellent extreme-pressure and anti-wear properties. Protection against shocks and corrosion.

1500 2200 3000

ISO 12925 CKC • DIN 51517-3 CLP (grade 1500) • AGMA 9005-E2, NF-F19-809

CARTER MS 100

Very high-viscosity bitumens

• Open gears.

Reinforced extreme-pressure properties. Superior adhesiveness. Resistance to water and anticorrosion protection.

6800

ISO 6743-6 CKJ

CARTER ENS 400 CARTER ENS/EP 700

Very high-viscosity bitumens

• Open gears or gears in leaky casings rotating at slow speed. • Ring gears, slideways. • Lubrication of cables and metal chains.

Possible application at ambient temperature thanks to the solvent that lowers the viscosity. CARTER ENS/EP 700 is available as an aerosol.

CARTER ALS

Non-staining

• Gears in aluminium seam casings: cylindrical gear pairs, bearings and couplings. • Spur gears and worm screws.

Non-staining of aluminium. Excellent protection of lubricated parts. Resistance to corrosion even in the presence of water.

NSF H1, suitable for incidental food contact

Kinematic viscosity at 100 °C of the dry extract: 400 and 700 mm²/s 220 460

ENS 400: ISO 6743-6 CKH-DIL ENS/EP 700: ISO 6743-6 CKJ-DIL

Gears

PRODUCT

-

23

Movements CIRCULATION OILS

Product

Applications

MISOLA oils have been specifically developed for the pulp and paper industry. The classifications shown for these fluids are those of the ISO 6743-4 and ISO 6743-6 standards in accordance with the performance level and the viscosity grade.

Specific advantages

ISO VG

Specifications

CIRKAN C

• Total loss or sump lubrication for movements, joints, bearings, chains.

Severely refined paraffinic mineral oil. High natural viscosity index.

32 to 320

ISO 6743-4 HH • ISO 6743/1 AN

CIRKAN RO

• Apparatus and hydraulic circuits subjected to temperature constraints.

Anticorrosion protection of equipment. Oxidation resistance.

32 to 460

ISO 6743-4 HL • ISO 6743-6 CKB • DIN 51517-2 CL • DIN 51524-1HL • AGMA 9005-E2 RO

CIRKAN ZS

• Apparatus and hydraulic circuits operating under severe temperature and load conditions.

Very good anti-wear and anticorrosion properties. Reinforced protection of highly loaded equipment. Oxidation resistance.

220 320

ISO 6743-6 CKB • ISO 12925-1 CKB

CORTIS MS

•G  ears, movements and various mechanical systems requiring anti-wear properties. •F  or Morgoil-type hydrodynamic bearings, BGV bearings and Danieli ESS.

Very good anti-wear and anticorrosion properties. Reinforced protection of highly loaded equipment. Formation of deposits prevented due to ashless additives. Excellent demulsification properties.

100 to 680

ISO 6743-4 HM • ISO 12925-1 CKC Danieli® Standard • Morgoil® Lubricant • Morgoil® Advanced Lubricant

CIRCULATION OILS FOR PAPERMAKING MACHINES Product MISOLA AFH

MISOLA ASC

MISOLA MAP

MISOLA MAP SH

24

Nature Ashless mineral

Ashless mineral

Ashless semi-synthetic

Ashless synthetic PAO

Applications

Specific advantages

•B  earings and gears operating in a warm, moist environment.

Excellent thermal stability and oxidation resistance. Reinforced anti-wear protection. Excellent anticorrosion protection. Ashless additives limiting the formation of deposits.

•E  quipment operating under high temperature and load conditions. •B  earings and gears operating in a warm, moist environment. •W  et- and dry-end sections of papermaking machines. •A  dvised when loaded gears form part of the lubrication circuit.

ISO VG

Movements

CIRKAN, CORTIS and MISOLA are circulation oils designed for the centralized lubrication of various equipments on an industrial machine: bearings, gears, etc. TOTAL offers a wide range, from pure mineral oil for lubrication of weakly loaded systems operating at a moderate temperature, to highly sophisticated products adapted to the severest operating conditions.

Specifications

150 220

ISO 12925-1 CKD

Excellent load capacity. Long life oil thanks to very good thermal stability and oxidation resistance. Very good anticorrosion protection even in the presence of acid process water. Ashless additivation limiting the formation of deposits.

100 to 320

ISO 12925-1 CKD

•P  lain or rolling bearings and medium-loaded gears subjected to considerable temperature constraints. •D  rying cylinder bearings for papermaking machines. •H  ydraulic circuits in variable crown cylinders.

Able to endure temperatures up to +130 °C. Excellent anticorrosion protection. Ashless additives limiting the formation of deposits. Extra long life oil.

150 to 460

•P  lain or rolling bearings and medium-loaded gears subjected to considerable temperature constraints. •R  ecommended for drying cylinder bearings for papermaking machines.

Able to endure considerable temperature constraints. Excellent anti-wear and anticorrosion protection. Ashless additives limiting the formation of deposits. Extra long life oil.

150 à 460

Voith VN 108 • FAG FE8 PM

Voith • Metso • SKF • FAG

ISO 6743-4 HL • ISO 12925-1 CKB SKF Rollen Test

ISO 12925-1 CKS Voith VN108 • Metso • SKF Rollen Test • FAG FE8 PM

25

Movements HIGH TEMPERATURE CHAIN OILS Product CORTIS SHT 200

Applications •C  ontinuous lubrication systems. •M  ovements, roller chains, rollers of the roller bearings, cams operating in ovens or stoves. •G  lass manufacturing machines. •C  onveyor chains for continuous hot-pressing machines.

Specific advantages

Viscosity*

Synthetic bases limiting oxidation deposits at very high temperatures. Anti-wear power guaranteed at very high temperatures. Ensures continuous lubrication of devices at temperatures up to +240 °C.

200

Specifications -

OILS FOR STEAM ENGINE CYLINDERS NATURE

CYL

Non–compounded mineral

CYL C

Compounded mineral

Applications •S  team engine cylinders.

Specific advantages Severely refined base oils. High viscosity index.

ISO VG

Specifications

460 1000

ISO 6743-99 Z

460 680

ISO 6743-99 Z

Movements

Product

* Typical kinematic viscosity at 40 °C in mm²/s

26

27

Metalworking

TOTAL offers a comprehensive range of metalworking fluids that will enable you to increase your competitiveness by combining machining quality and reduced production costs. Formulation of the fluids originates from others by testing instrumented machine tools that aim to optimize machine performances in terms of cutting force and tool wear. As a result, the fluids provide reduced energy consumption and lengthened tool service life.

While Health, Safety and Environment are priorities for TOTAL: • The formulation of the products complies with legislations in force and ensures greater convenience of use for the operators. • Training sessions regarding HSE rules and best practices are offered.

NEAT CUTTING OILS

Product

Metals

APPLICATIONS

VALONA neat cutting oils comply with the European directives on the VOC emissions. The use of these products contributes to the continuous improvement initiatives, in regards to Health, Safety and Environment. The products’ performance levels are indicated by a figure ascending from 1000 to 9000. The ascending numbers following the products’ name reflect the machining capacity of the fluid, from non severe to very hard operations.

Specific advantages

Viscosity*

Specifications

CUTTING OILS FOR STANDARD MACHINING VALONA MS 1022

Ferrous and non-ferrous

•P  recision turning of brass and low-carbon steels.

VALONA MS 1032 VALONA MS 3020

Economic products. Neutral towards elastomers and paints.

22

Reduced oil consumption. Chip centrifugation facilitated.

20

Excellent cooling power.

9

ISO-L-MHB

32

Metalworking

VALONA oils are designed for a wide range of machining, from non-severe to very hard operations. They guarantee a high performance level while remaining environmentally friendly due to their chlorine-free formulation. • Very good surface finish with a high standard of dimensions and tolerances. • Extended service life for cutting tools. • Reprocessing at least cost. • Convenient use for the operators.

CUTTING OILS FOR SEVERE MACHINING VALONA MS 5009

Ferrous and non-ferrous

VALONA MS 5020

•P  recision turning of copper or aluminium alloys, low-carbon and medium-high-carbon steels. • Precision turning and routine machining of copper or aluminium alloys, and steels ranging as far as hard or stainless.

ISO-L-MHE

20

VALONA ST 5022

Ferrous

•M  achining of light alloys, high-, extra high-carbon and alloyed steels.

Optimized for steels.

22

ISO-L-MHF

VALONA AU 5510

Ferrous and non-ferrous

•M  achining of aluminium alloys.

Optimized for light alloys. Prevents gumming of shavings.

10

ISO-L-MHE

VALONA AU 5520

•P  recision turning of aluminium, copper alloys, low-and medium-carbon steels.

20

CUTTING OILS FOR VERY SEVERE MACHINING VALONA MS 7009

Ferrous and non-ferrous

VALONA MS 7023 VALONA MS 6016 F

•M  achining of steels ranging as far as extra-high-carbon, special and refractory steels. •A  dapted to the machining of titanium.

High efficiency in a wide application range, including biomedical and aeronautical.

9

Recommended for the machining of titanium.

16

ISO-L-MHB

23

VALONA ST 7016

Ferrous

•D  eep drilling, small diameters, steel and stainless steel tapping, creep feed grinding of threads, toothing and tap relief on high-carbon steels.

Very good disposal of the shavings.

16

ISO-L-MHF

VALONA ST 9013

Ferrous

•L  ikewise VALONA ST 7016 as well as for boring, reaming of alloyed and stainless steels, hobbing and shaving, high- (VG 13) and slow-speed (VG 37) broaching.

Premium oil for the most demanding applications.

13

ISO-L-MHF

VALONA ST 9122 VALONA ST 9037

22 37

VALONA ST 9520

Ferrous

•D  ifficult internal works: gear hobbing, grinding of highly alloyed, refractory steels and titanium alloys.

Replaces chlorinated products.

20

ISO-L-MHF

VALONA BR 9015

Ferrous and aluminium

•H  igh-speed broaching of highly alloyed steels and all difficult operations.

Exceptional finish for broaching.

15

ISO-L-MHF

* Typical kinematic viscosity at 40 °C in mm²/s

28

29

Metalworking NEAT CUTTING OILS

Product

Metals

APPLICATIONS

Specific advantages

Viscosity*

Specifications

GRINDING AND LAPPING OILS VALONA GR 3005

Ferrous and non-ferrous

VALONA GR 3008

•L  apping, superfinishing and grinding of high-carbon steels.

VALONA GR 7005

Economic product.

5 8

Optimised for lapping and superfinishing operations.

VALONA AU 5510

• Grinding.

ISO-L-MHE

Optimised for demanding grinding operations.

5 10

VALONA AU 5520

20

VALONA MQL 3046

Ferrous and non-ferrous

•M  icrospray. •P  articularly suited to milling, tapping, drilling, reaming and sawing.

Vegetable base oil. Reduced fluid consumption. Cleaner machines and workshops. Elimination of the costs of rejects. Better upgrading of shavings.

46

ISO-L-MHB

VALONA MQL 5035

Ferrous and non-ferrous

• Microspray. • High-tech applications. • Likewise VALONA MQL 3046 as well as: severe and very severe machining of high-carbon and extra high-carbon steels, stainless steels, titanium and tantalum alloys.

Reduced fluid consumption. Cleaner machines and workshops. Elimination of the costs of rejects. Better upgrading of shavings.

35

ISO-L-MHE

MULTIPURPOSE CUTTING AND LUBRICATION OILS

Metalworking

MICROLUBRICATION OILS

SCILIA products ensure excellent lubrication, in addition to their performance as multipurpose neat cutting oils. Their quality is maintained even in the event of incidental pollution by casing oils.

Product SCILIA MS 3040

Metals Ferrous and non-ferrous

SCILIA MS 5032 SCILIA MS 7046

APPLICATIONS •L  ubrification of cutting operations and machine tools. •R  ising performances, from SCILIA MS 3040 to SCILIA MS 7046.

Specific advantages

Viscosity*

Recommended for free-cutting steels and low-carbon steels.

40

Recommended for stainless steels.

32

Machining of all metals, including refractory steels and titanium. Recommended for tapping operations.

46

Specifications ISO-L-MHE

ELECTRO-EROSION FLUIDS The products of the DIEL range are particularly well adapted to the electro erosion process. • Narrow distillation intervals. • Absence of aromatic compounds. • High flash point. • Excellent resistance to oxidation.

Product

30

APPLICATIONS

DIEL electro erosion fluids comply with the European directives concerning the VOC emissions. The use of these products contributes to the continuous improvement initiatives in regards to Health, Safety and Environment.

Specific advantages

Viscosity*

Specifications

DIEL MS 5000

• Preliminary work and semi-finishing.

Fluid product.

3.9

ISO-L-MHA

DIEL MS 7000

• Semi-finishing work and finishing for complex forms and precise dimensions.

Very fluid product, facilitating elimination of metal particles.

2.4

ISO-L-MHA

Biodegradable

* Typical kinematic viscosity at 40 °C in mm²/s

31

Metalworking SOLUBLE CUTTING FLUIDS TOTAL offers a wide range of soluble fluids: macro-emulsions with LACTUCA, micro-emulsions with SPIRIT and synthetic fluids with VULSOL. With a care for health and safety for operators, all the fluids comply with international regulations such as 1999/45/EC or BPD 98/8/EC. HSE specifications: our soluble fluids are chlorine-free, nitrite-free and diethanolamine-free, and free of other substances as well (see HSE additional list in the table). The use of clean water of good biological and physicochemical quality is recommended for the implementation of soluble fluids.

Product

Metals

APPLICATIONS

Their formulation guarantees machining performance for any type of metals and severity of operations: • Reduction in the cutting efforts provides longer tool service life and superior surface finish of the parts, • Protection against corrosion of the machined parts and equipments. • Resistance in the development of bacteria and mold. • Non-foaming product with no particular odour for convenient use. • Stability in service ensuring long oil drain intervals.

Specific advantages

HSE

Specifications

LACTUCA LT 3000

Non-ferrous and low-carbon steels

•C  onventional machining of free-cutting brass, copper alloys and high-grade carbon steels.

Economic formula. Does not stain copper alloys.

-

ISO-L-MAA

LACTUCA MS 5000

Ferrous and non-ferrous

•C  onventional machining of aluminium alloys, low- and medium-carbon steels.

Economic formula.

-

ISO-L-MAA

LACTUCA MS 7000

Ferrous and non-ferrous

•D  ifficult and very difficult machining of cast iron, high-carbon, alloyed, stainless steels and aluminium alloys.

High quality product. A single product for all applications.

-

ISO-L MAD • TRGS 611

LACTUCA MS 9000

Ferrous and non-ferrous

•D  ifficult and very difficult machining of hard metals, stainless steels and titanium: sawing, broaching, cold form tapping and deep drilling.

Premium product. Extended tools’ service life.

Glycol ether-free

ISO-L MAB • TRGS 611

SPIRIT MS 3000

Ferrous

•C  onventional machining of cast iron and low-carbon steels. •R  ecommended for surface, cylindrical or centreless grinding.

Economic formula. Cleanness of machines thanks to detergent action.

Glycol ether-free

ISO-L-MAE • TRGS 611

SPIRIT MS 5000

Ferrous and non-ferrous

•D  ifficult machining of cast iron, high-carbon steels, alloyed steels and aluminium alloys.

A single product for a wide range of applications.

-

ISO-L MAE • TRGS 611

SPIRIT ASI 7000

Ferrous and non-ferrous

•D  ifficult machining. •D  edicated to aluminium alloys with high silicone content.

Excellent cutting performances. Fewer rejects from machined parts.

-

ISO-L MAF • TRGS 611

SPIRIT WBA 5000

Ferrous and non-ferrous

•D  ifficult machining of cast iron, high-carbon steels, alloyed steels and aluminium alloys.

High-performance multipurpose formula.

Boron-free Amine-free

ISO-L MAF • TRGS 611

SPIRIT WB 7000

Ferrous and non-ferrous

•D  ifficult and very difficult machining of cast iron, high-carbon, alloyed, stainless steels and aluminium alloys.

Extreme-pressure additives making it possible to reduce the cutting efforts.

Boron-free

ISO-L MAF • TRGS 611

Metalworking

MACRO-EMULSIONS

MICRO-EMULSIONS

SOLUBLE SYNTHETIC FLUIDS VULSOL MS 5500

Ferrous

•G  rinding. •R  ecommended for rolling mill cylinders.

Wetting, refrigerating and detergent power for an excellent surface finish of the machined parts

Boron-free

ISO-L-MAG • TRGS 611

VULSOL MS 7500

Ferrous and non-ferrous

•D  ifficult machining and grinding of steel, steel alloys and non-ferrous metals. •M  achining of plastics and special optical glasses.

Natural resistance to bacteria development. A single product for machining and grinding.

Boron-free

ISO-L MAH

Product

NATURE

APPLICATIONS

Specific advantages

HSE

TREATMENT ADDITIVES

32

CONTRAM CB 3

Detergent

•C  leaning of machine tools before oil change. •R  ecommended for individual tanks and centralised systems.

Alkaline pH compatible with the fluids in service.

Formaldehyde-free

EBOTEC BT 80

Preservative

•C  urative treatment of aqueous machining, rolling, drawing and wire drawing fluids.

Extended service life of the aqueous machining fluids due to its action over a wide range of micro-organisms.

Formaldehyde-free

ANTIFOAM MS 30

Anti-foaming

•R  ecommended in post-treatment. •E  limination of the foam formed during use of emulsions and synthetic fluids.

No undesirable effects for finishing operations. Contains no silicone.

-

33

Metalworking METAL FORMING OILS The MARTOL range is designed for the lubrication of cold ferrous and non-ferrous metal forming operations: stamping, forming cutting, drawing, wire drawing, depending on the products used. In order to respect the health of users and protect the environment, the formulation of these oils is chlorine-free (excepting Martol EP and Martol EV 45). The Health, Safety, Environment (HSE) properties are specified in the tables.

Product

Metals

MARTOL oils ensure a very high level of lubrication and productivity gains: • Very good surface finish of the stamped parts. • Reduction of maintenance shutdowns. • Good anti-corrosion properties. • Good capacity for elimination. • Absence of any particular odour.

APPLICATIONS

Specific advantages

HSE

Viscosity*

Specifications

NEAT METAL FORMING OILS MARTOL EP 360

Ferrous, stainless steels, nonferrous

MARTOL EP 1000

• For thicknesses < 3 mm.

Spreading efficiency.

Chlorinated

• For thicknesses < 5 mm.

Wide range of uses.

360

• For very difficult operations or thicknesses > 5 mm.

Very high extreme-pressure properties.

1000

ISO-L-MHF

MARTOL 230 CF

Ferrous and aluminium alloys

• Cutting, stamping for thicknesses < 2 mm.

Excellent lubricity properties.

Chlorine-free

230

ISO-L-MHF

MARTOL EP 5 CF

Ferrous and aluminium alloys

•C  utting, forming. •F  or thicknesses < 2 mm.

Permits assembly by weld without degreasing.

Chlorine-free

5

ISO-L-MHF

MARTOL EP 65 CF

• Cutting, stamping, extrusion of transmission shafts, wire drawing of steels.

Permits several passes without regreasing.

65

Meets the demands of the car industry.

MARTOL EP 100 CF

• Cutting, stamping and drawing of low- to medium-carbon steels.

Less tool wear.

100

ISO-L-MHF

MARTOL EP 235 CF

• Cutting, stamping and drawing of low- to medium-carbon bars.

High seizing temperature (drawing of bars).

235

ISO-L-MHF

MARTOL EP 405 CF

• Severe stamping operations, drawing.

Permits several passes without regreasing.

405

ISO-L-MHF

•M  anufacture of packaging: stamping and pre-induction of aluminium strips.

Resistance to rancidness. Performance rising with the viscosity level.

3

ISO-L-MHB

MARTOL FMO 3 CF

Aluminium

MARTOL FMO 15 CF

Raw materials of vegetable origin MARTOL FMO 3CF also contains a solvent

MARTOL FMO 75 CF MARTOL FMO 235 CF MARTOL EV 10 CF

34

150

All metals

15 75 235

• Mild cutting and stamping operations. • For thicknesses from 0.2 to 0.5 mm.

Odourless. Excellent spreading of the film.

Chlorine-free Sulphur-free

2.2 at 20 °C

ISO-L-MHB

MARTOL EV 20 CF

•L  ikewise MARTOL EV 10 CF. •M  anufacture of iron shavings.

Limitation of evaporation losses. Low emission of VOC.

Chlorine-free Sulphur-free

2.72 at 20 °C

ISO-L-MHB

MARTOL EV 40 CF

•C  utting of steel and aluminium strips. •F  or thicknesses < 1 mm.

Colourless and odourless.

Chlorine-free

2.05 at 20 °C

ISO-L-MHC

MARTOL EV 45

• Cutting. • Suitable for stainless steels.

Low residue.

Chlorinated

2.8 at 20 °C

ISO-L-MHF

MARTOL LVG 15 CF

Non-ferrous

• Stamping and fine blanking. • For thicknesses < 0.3 mm.

Non-staining of aluminium. Elimination of residues by thermal degreasing. Excellent spreading capacity. Odourless.

Chlorine-free

2.1 at 20 °C

ISO-L-MHB

MARTOL LVG 25 CF

Steel and non-ferrous

•M  ild- and medium-severe stamping operations. •F  or thicknesses < 2 mm.

-

Chlorine-free

2.3 at 20 °C

ISO-L-MHB

MARTOL LVG 50 CF

Steel and non-ferrous

•S  tamping and blanking. •F  or thicknesses < 3 mm.

-

Chlorine-free Sulphur-free Free of aromatic compound Reduced VOC emissions

4.65 at 20 °C

ISO-L-MHF

Biodegradable

Metalworking

MARTOL EP 150

Meets the requirements of European regulations governing emissions of VOC.

* Typical kinematic viscosity at 40 °C in mm²/s, unless otherwise indicated

35

Metalworking METAL FORMING OILS

Product

Metals

APPLICATIONS

Specific advantages

HSE

Viscosity*

Specifications

Allow to adjust the degree of lubrication to the severity of operations. Rationalisation of lubrication in the workshop. Good resistance to hard waters.

Chlorine-free Formaldehyde-free

164

ISO-L-MAD

Chlorine-free Formaldehyde-free

52

ISO-L-MHD

Chlorinated Formaldehyde-free

130

ISO-L-MAD

SOLUBLE METAL FORMING OILS MARTOL SOLUBLE 100

Ferrous

• Very severe stamping.

ETIRELF TRS 48

High-carbon steels and aluminium alloys

•S  tamping. •B  lanking.

MARTOL S 4173

Ferrous metals and stainless steels

• Severe stamping of steel strips. • Press-cutting of sheet steel.

The LUBRILAM range is designed for cold rolling aluminium and covers a wide field of applications, from preliminary work to finishing. LUBRILAM oils meet international specifications and are characterised by: • Crushing capacity • Distillation interval adapted to requirements

Product LUBRILAM S 22 L

Metals Aluminium

APPLICATIONS

• High resistance to oxidation • Solvent power of the additives • Non-staining of aluminium • Absence of aromatic compound (excepting grade S 24 L) as regards protection of environment and users’ health

Specific advantages

Viscosity*

• Rolling base for separation of very fine sheets

Prevents gumming of the sheets. Low odour.

2.7 at 20 °C

LUBRILAM S 24 L

•R  olling base for semi-finishing to finishing operations.

Crushing capacity.

2.5 at 20 °C

LUBRILAM S 31 L

• Narrow cut rolling base for semi-finishing to finishing operations.

Low evaporation losses. Energy savings during operations of annealing.

2.8 at 20 °C 1.9 at 40 °C

LUBRILAM S 40 L

• Viscous rolling base for preliminary work operations.

Crushing capacity, low odour. Very great thermal and UV stability.

3.5 at 20 °C 2.3 at 40 °C

LUBRILAM C3

• Concentrate of alcohol-type performance additives to increase the smoothness of the rolling base.

Solubilisation capacity. Ease of application.

7.7 at 20 °C

LUBRILAM C6

• Concentrate of ester-type performance additives to increase the smoothness of the rolling base.

Solubilisation capacity. Ease of application.

2.3 at 40 °C

LUBRILAM CLEANER

• Air purification oil.

Resistance to oxidation. Solvent recovery power.

30.6 at 40 °C

Specifications Meets the requirements of the FDA CFR 178.3910

Metalworking

ROLLING OILS

AIRPURE systems

CONTINUOUS CASTING Product IRONCAST SY 50

APPLICATIONS • Continuous casting of steel. • Suitable for moulds operating at high speed.

Specific advantages Superior surface finish of the ingots. Increased productivity of the moulds. Low fumes emission.

Viscosity* 50

SpEcifications ISO-L-MHB

* Typical kinematic viscosity at 40 °C in mm²/s, unless otherwise indicated

36

37

Metalworking QUENCH OILS DRASTA quench oils match all thermal treatment requirements and all types of installation. Formulated from base oils selected for their exceptional resistance to oxidation, they enable to enhance the mechanical properties of the parts at least cost.

Type of treatment

APPLICATIONS

Specific advantages

Vmax drasticity

Viscosity* Specifications

DRASTA C 1000

Cold quenching

• Hardening of steels possessing good quenching power. • Hardening of cemented or carbonitrated steels.

Resistance to oxidation and high flash point.

53.3 °C/s at 488 °C

16

ISO-L-UHB • ISO-L-UHA

DRASTA C 1500

Cold quenching

•H  ardening of steels possessing good quenching power. •H  ardening of cemented or carbonitrated steels.

Excellent resistance to oxidation and high flash point. Low volatility.

55.8 °C/s at 506 °C

20

ISO-L-UHB

DRASTA C 5000

Semi-rapid cold quenching

• Hardening of medium-to-good quenchabilty steels.

76.7 °C/s at 553 °C

21,5

ISO-L-UHB

DRASTA C 7000

Rapid cold quenching

• Hardening of low quenchability steels.

Multipurpose product. Product saving thanks to good dripping capacity.

97.5 °C/s at 602 °C

23

ISO-L-UHB

DRASTA M 7000

Semi-hot quenching

• Hardening of steels possessing good quenching power. • Hardening of cemented or carbonitrated steels.

Stable cooling performance over time. Permits cold and hot quenching.

77.5 °C/s at 566 °C (bath at 40 °C) 80 °C/s at 582 °C (bath at 100 °C)

42

ISO-L-UHD

DRASTA H 7000

Semi-accelerated hot quenching

• Hardening of steels possessing good quenching power. • Hardening of cemented or carbonitrated steels. • Hardening of parts where one wishes to avoid deformations, quenching cracks.

Stable cooling performance over time. Product saving thanks to good dripping capacity

84.2 °C/s at 609 °C (bath at 40 °C) 86.7 °C/s at 640 °C (bath at 100 °C)

120

ISO-L-UHF

Metalworking

Product

ADDITIVES AND SOFTENER FOR QUENCH OILS Product

Type of treatment

APPLICATIONS

Specific advantages

Viscosity*

HSE

Specifications

DRASTA MAX C

Cold quenching additive

• Quench accelerator concentrate for cold quenching oils.

Permits to adjust the quench speed of the cold quench oils.

45

ISO-L-UHK

DRASTA MAX H

Semi-hot and hot quenching additive

• Quench accelerator concentrate for hot and semi-hot quenching oils.

Permits to adjust the quench speed of the cold and hot or semi-hot quench oils.

410

ISO-L-UHK

DRASTA SY 600

Aqueous quench softener for chrome, vanadium steels, light alloys

•W  ater hardening retarders for hardening of parts designed for tool manufacture, car industry, agriculture or gardening.

Non-flammable quenching sump. Anti-rust properties and non-toxic product. No foaming, quench speed adaptability.

575

Formaldehyde-free

ISO-L-UAD

PROTECTION OILS OSYRIS oils serve to protect parts from the risks of corrosion during storage and transportation. They can be applied to all ferrous metals, from cast iron to alloyed steels. All OSYRIS products can be applied without distinction in quench spray and brush form. They can be disposed of with the aid of solvents and lyes.

Product OSYRIS 1000

Nature of the film Oily

Length of protection

TOTAL offers a wide range of products in accordance with the requested properties of the protective film. • Nature and thickness of the film: oily, waxy or solvented. • Resistance over time: inter-operations protection with water-repellent effect or a longer-lasting protection.

Specific advantages

Specifications

< 6 months

Ease of elimination.

ISO-L-RC

6 to 8 months

Strengthened protection properties.

ISO-L-RD

-

Economic product for washing and drying of sheet metal.

ISO-L-RB

OSYRIS DWX 3000

6 to 8 months

Quick drying. Easily removable film.

ISO-L-REE

OSYRIS DWY 3500

6 to 8 months

High flash point to limit the risks of fire.

ISO-L-REE

OSYRIS 3000 OSYRIS DWX 1000

Oily after evaporation of the solvent

* Typical kinematic viscosity at 40 °C in mm²/s

38

39

Metalworking PROTECTION OILS

Product OSYRIS DWL 3550

Nature of the film Oily after evaporation of the solvent

Length of protection

Specific advantages

Specifications

6 to 8 months

Absence of any odour of solvent.

ISO-L-REE

OSYRIS DWX 5000

8 to 12 months

Quick drying. Easily removable film.

ISO-L-REE

OSYRIS DWY 5500

8 to 12 months

High flash point to limit the risks of fire.

ISO-L-REE

OSYRIS DWX 7000

12 to 18 months

High-performance product. Rapid evaporation. Easily removable film.

ISO-L-REE

OSYRIS DWX 9000

Waxy after evaporation of the solvent

> 18 months

Very long-lasting protection.

ISO-L-RFF

OSYRIS X 9100

Varnish after evaporation of the solvent

> 18 months

Dry, hard film for very long-lasting protection.

ISO-L-REE

Product FINAROL B 5746

Nature of the film Oily

APPLICATIONS •P  rotection and little-severe deformation of the electrozinc-coated sheet steel.

Specific advantages

Viscosity*

Multipurpose product, developed for the car industry and steelmaking.

9.75

SpEcifications ISO-L-RC

LUBRICATION OF MACHINE TOOLS The DROSERA product range is dedicated to the lubrication of machine tools. The various grades of viscosity available allow to lubricate a wide variety of mechanical parts: • Very rapid spindles (grade 2) and rapid spindles (grades 5 to 22) • Hydraulic circuits (grades 32 and 46) • Both horizontal and vertical slides (grades 68 to 220)

Product DROSERA MS

APPLICATIONS • Multipurpose range for all machine tool parts depending on the viscosity of the lubricant: hydraulic, slideways, gears, spindle movements, feed and gear boxes.

DROSERA oils offer the following advantages: • Multipurpose • Very good extreme-pressure performances • Excellent stick-slip properties • Low friction coefficient

Specific advantages Wide range of applications.

Viscosity* 2 to 220

Metalworking

PRELUBES

Specifications Depending on viscosities: ISO 6743-2: FD 2-5-10-15-22 • ISO 6743-4: HG 32-46 • ISO 6743-13: GA 68-100-150-220 • DIN 51517 Part 3: CLP 46-68-100-150-220 • DIN 51502: CGLP 46-68-100-150-220 Cincinnati-Milacron: P-65, P-62, P-47, P-50, P-53, P-45

DROSERA FB 68 DROSERA HXE 68

DROSERA HXE 220

• Way lubricant including those lined with synthetic resin, feed and gear boxes.

Biocide-reinforced. Very good adhesiveness.

68

Compatibility with cutting fluids, even of the aqueous kind. Very good adhesiveness.

68

Compatibility with cutting fluids, even of the aqueous kind. Very good adhesiveness.

220

ISO 6743-13: GB 68 • DIN 51524 Part 2: HLP 68 • DIN 51517 Part 3: CLP 68 • DIN 51502: CGLP 68 • AFNOR E 60203 HM 68, HG 68, G 68 • CETOP RP 91H, HM 68 Cincinnati-Milacron: P-47 ISO 6743-13: GB 220 • DIN 51517 Part 3: CLP 220 • DIN 51502: CGLP 220 • AFNOR E 60203 G 220 Cincinnati-Milacron: P-50

* Typical kinematic viscosity at 40 °C in mm²/s

40

41

MOULD OILS FOR CONCRETE, CLAYS AND TERRACOTTA MOLDOL and BIOMOLDOL oils are designed for concrete, clay and terracotta mould releasing operations. They secure the demoulding operations and provide an excellent rendering: • Ease of demoulding • Very considerable thermal stability to prevent the formation of deposits • Cleanness of the surfaces of the edges and the contours

Product

NATURE

Applications

• Protection of the moulds against corrosion • Ease of subsequent application of paints, coatings or plaster. BIOMOLDOL oils are formulated on a vegetable base so as to obtain a very easily biodegradable product. High demoulding performances products, they permit lower consumption of fluid than the products of petroleum origin.

Specific advantages

Viscosity*

Specifications

CONCRETE DEMOULDING MOLDOL V 12

Mineral

•D  elayed demoulding on site of vibrated concrete components.

Universal product. Good surface finish.

MOLDOL BD 1

Mineral

•D  elayed demoulding of vibrated concrete components, whether baked up to +80 °C or not.

MOLDOL B 5817

Mineral

MOLDOL P 50

5.2

Flash point > +80 °C (ISO 2719)

Excellent demoulding. Cleanness and protection of the moulds.

8

Flash point > +150 °C (ISO 2592)

•P  rotection against sticking of the concrete. •F  or ready-mix plants, mixers, crushers and concrete mixer trucks.

Resistance to corrosion in a moist environment.

10

Flash point > +150 °C (ISO 2592)

Mineral

•D  emoulding of concrete from metal or wooden forms.

Improvement in the surface finish. Protection of the metal branches and soaking of the wooden forms.

16.8

Flash point > +200 °C (ISO 2592)

MOLDOL FC 30

Mineral

•D  emoulding of the corrugated iron fibrocement, irrespective of the type of fibre.

Adapted to all types of fibres. High viscosity to facilitate the mould release.

31

Flash point > +200 °C (ISO 2592)

MOLDOL LW 5833

Mineral

•D  emoulding of the cellular concrete. •R  ecommended for steel moulds.

No colouring of the concrete even on the edges.

133

Flash point > +240 °C (ISO 2592)

BIOMOLDOL 4

Vegetable base Biodegradable

•D  elayed demoulding of the concrete.

Great ease of demoulding. Lower oil consumption compared to oils of petroleum origin. Biodegradability > 95% (CEC.L33.A94).

4.9

Flash point > +80 °C (ISO 2592)

BIOMOLDOL 5

•D  elayed demoulding of the concrete.

BIOMOLDOL 6

•D  elayed demoulding on site and during prefabrication of vibrated concrete components.

BIOMOLDOL 7

• Demoulding of concrete tiles.

BIOMOLDOL S

Emulsifiable concentrate Biodegradable

Process oils and manufacturing auxiliaries

Process oils and manufacturing auxiliaries

7.1 18 5.9

•R  ecommended for wooden moulds.

Very economic solution. Offers a smooth surface to the concrete. Biodegradability > 95% (CEC.L33.A94).

34 concentrate

CLAY AND TERRACOTTA DEMOULDING MOLDOL CT 4

High flash point mineral

•D  emoulding of clay or terracotta objects: tiles, bricks, pottery…

Easy demoulding due to excellent wetting ability. Contains no aromatic hydrocarbon.

7.7 at 20 °C

Flash point > +100 °C (ISO 2719)

BIOMOLDOL B 5745B

Vegetable base Biodegradable

•D  emoulding of clay or terracotta objects: tiles, bricks, pottery…

Easy demoulding due to excellent wetting ability. Contains no aromatic hydrocarbon.

2.3

Flash point > +80 °C (ISO 2719)

ELASTOMER DEMOULDING OILS MOLDOL R oils are demoulding fluids for the elastomeric materials. The choice of product depends on the compatibility with the type of elastomer used.

Product

42

NATURE

Applications

Specific advantages

Viscosity*

Compatibility with elastomers

MOLDOL RW 4926

Water-washable synthetic liquid

•D  emoulding of hollow elastomer objects. •S  pecific application in car industry: demoulding of durites.

Biodegradability > 90% (CEC-L-33T82). Totally inodorous.

225

EPDM • PEC • PVC / Nitrile • FKM (Viton) • CR Neoprene • ECO • Vamac® • EVA

MOLDOL RW 30413

Water-washable PAG synthetic liquid

•D  emoulding of hollow elastomer objects. •S  pecific application in car industry: demoulding of durites.

PAG-base.

680

EPDM sulphurized • PVC / Nitrile • CR Neoprene

Biodegradable

*Typical kinematic viscosity at 40 °C in mm²/s, unless otherwise indicated

43

ELASTOMER DEMOULDING OILS

PRODUCT

NATURE

MOLDOL R MULTI

Water-washable synthetic liquid

MOLDOL R SE GEL

Water-washable synthetic gel

MOLDOL RW 4949

Water-washable synthetic gel

APPLICATIONS • Demoulding of hollow elastomer objects. • Specific application in car industry: demoulding of durites.

SPECIFIC ADVANTAGES Totally inodorous.

VISCOSITY* 800

COMPATIBILITY WITH ELASTOMERS EPDM • PEC • PVC / Nitrile • FKM (Viton) • VMQ (Silicone) • CR Neoprene • Vamac® • EVA

Anticorrosion properties.

-

EPDM • PEC • PVC / Nitrile • FKM (Viton) • CR Neoprene • ECO

Biodegradability > 90% (CEC.L33.A94). Totally inodorous.

-

EPDM • PEC • PVC / Nitrile • FKM (Viton) • VMQ (Silicone) • CR Neoprene • Vamac® • EVA

HEAT TRANSFER FLUIDS SERIOLA and JARYTHERM heat transfer fluids cover a wide variety of applications: heating of domestic and industrial premises, manufacturing processes in cement works, paper mills, chemical and plastics processing industries and installations combining heating and cooling cycles.

PRODUCT

APPLICATIONS

SPECIFIC ADVANTAGES

VISCOSITY*

SPECIFICATIONS

SERIOLA 320

Inhibited mineral

• Opened circuits with air contact.

Process temperature < +250 °C. High viscosity.

310

ISO 6743-12 L-QA

SERIOLA QA 46

Inhibited mineral

• Opened circuits with air contact.

Process temperature < +250 °C.

46

ISO 6743-12 L-QA

SERIOLA 1510

Mineral

• Closed circuits without air contact.

Process temperature < +280 °C. (+300 °C in the film).

31

ISO 6743-12 L-QB • DIN 51502 L

SERIOLA ETA

Mineral

• Closed circuits without air contact.

Process temperature < +300 °C. (+350 °C in the film).

32 100

ISO 6743-12 L-QB • DIN 51502 L

NEVASTANE HTF

White mineral

• Closed circuits without air contact. • Numerous manufacturing processes in agrifood industry: water baths, autoclaves, reactors, ovens, presses and moulds.

Process temperature < +300 °C. (+330 °C in the film).

32

NSF H1

• Hot cleaning of heat transfer circuits.

25

Miscible with mineral-base heat transfer fluids.

Process temperature ~+270 °C. Very high thermal stability.

SERIOLA DTH

44

NATURE

Whether they are mineral or synthetic base, SERIOLA and JARYTHERM fluids are characterized by: • Great thermal stability, thereby preventing clogging of the installations. • High heat exchange capacity which enables energy savings due to the reduced warm-up time of the installations. • Long service life without degradation of the fluid even at process temperatures rising as high as +350 °C.

Synthetic detergent

ISO 6743-12 L-QB • ISO 21469

JARYTHERM AX 320

Synthetic

• Closed circuits without air contact. • Non-pressurized heat transfer systems.

Process temperature from -10 °C to +310 °C (+340 °C in the film).

10

ISO 6743-12 L-QC

JARYTHERM DBT

Synthetic

• Closed circuits without air contact. • Chief applications in the chemical and plastics processing industries.

Process temperature from 0 °C to +350 °C (+370 °C in the film).

19

ISO 6743-12 L-QD

JARYTHERM BT 06

Synthetic

• Closed circuits without air contact. • Chiefly for installations combining heating and cooling cycles.

Process temperature from -30 °C to +280 °C. Temperature in the pressurized circuits < +350 °C.

4

ISO 6743-12 L-QE

NSF H1, suitable for incidental food contact

Process oils and manufacturing auxiliaries

Process oils and manufacturing auxiliaries

* Typical kinematic viscosity at 40 °C in mm²/s

45

WHITE OILS AND VASELINES FINAVESTAN white oils are extremly purified, due to refining stage including a high technological and high pressure hydrogenation process. Oils of medicinal quality meet the requirements of the pharmaceutical, cosmetics and agrifood industries in accordance with the national legislation in force.

PRODUCT FINAVESTAN A 50 B

NATURE

APPLICATIONS

Medicinal white oil

• Designed for the following industries: - pharmaceutical: excipient, - cosmetics: raw material, - plastics: plasticizer for PS and other polymers, for all packaging intended for food contact, - food: in accordance with the legislation in force.

FINAVESTAN A 80 B

LYRAN products are technically white oils of extremely great purity. They are used in numerous non-food applications, as a lubricant, as a plasticizer or as a component.

SPECIFIC ADVANTAGES Very high purity. Odourless, flavourless, colourless. Does not contain sulphur or aromatic hydrocarbon.

VISCOSITY*

SPECIFICATIONS

7.5

The use of these oils depends on the national legislation in force.

15

FINAVESTAN A 360 B

70

European Pharmacopoeia, liquid paraffin (most recent edition) US Pharmacopeia, Mineral Oil (most recent edition) USA FDA: 21 CFR 172.878 et 21 CFR 178.3620 (a), white mineral oil

FINAVESTAN A 520 B

100

Kosher • NSF 3H

7.5

FDA, 21 CFR 178-3620 (b)

FINAVESTAN A 100 B FINAVESTAN A 180 B FINAVESTAN A 210 B

LYRAN C 50 B

Technical white oil

LYRAN C 80 B EMETAN M

Medicinal vaseline

EMETAN T

Vaseline

18 29 40

• Process oil or raw material for: - lubrication of small devices, - manufacturing of plastics, rubbers and pesticides, - component for ink and textile oils.

Very high purity. Odourless, flavourless, colourless. Does not contain sulphur or aromatic hydrocarbon.

• Designed chiefly for the cosmetics and pharmaceutical industries as a lubricant or raw material.

Very high purity. Odourless, flavourless.

15 The use of these vaselines depends on the national legislation in force. EMETAN M only: European, French, German and US Pharmacopoeia

Process oils and manufacturing auxiliaries

Process oils and manufacturing auxiliaries

VEGETABLE OILS FOR THE AGRIFOOD INDUSTRY FINATUROL oils are specially designed for pastries and industrial baking. Their composition is 100% vegetable, with no GMO or compound of animal origin. Products available only in Europe.

PRODUCT FINATUROL K2

FINATUROL D

NATURE 100% vegetable Contains no compound of animal origin GMO-free

FINATUROL HT

46

APPLICATIONS

NSF H1, suitable for incidental food contact

• For pastries and industrial baking: for dough dividers and bread slicers.

• For pastries and industrial baking: high temperature food mould oil.

NSF 3H, suitable for direct food contact

SPECIFIC ADVANTAGES

VISCOSITY*

Economic vegetable oil. No spoiling of the taste and smell of the finished product.

35

High-performance product. Reduced oil consumption. Reduction in the formation of deposits.

35

Less consumption of product. Neutral smells and tastes regarding the finished product. Easy application.

100

SPECIFICATIONS NSF 3H Technological food auxiliary approved by the DGCCRF (France)

* Typical kinematic viscosity at 40 °C in mm²/s

47

PROCESS OILS Product TORILIS

NATURE Pure mineral

Applications • Process oil in various industries: rubber, plastics, textile (softening), treatment of leather, printing inks. • Clot-preventing or anti-dust agent.

Specific advantages High natural viscosity index. Perfectly suitable for mixtures.

Viscosity* 15 to 500

Specifications -

MACROEMULSION FOR HARD MATERIAL SAWING Product GRANITCUT 5000

NATURE Mineral

Applications • Designed for sawing of ceramics, granite with diamond-charged disk, wire or cable and for core sampling of granite blocks.

Specific advantages Rate of use: 2%.

Viscosity* 15

Specifications ISO-L-MAB

Process oils and manufacturing auxiliaries

Process oils and manufacturing auxiliaries

* Typical kinematic viscosity at 40 °C in mm²/s

48

49

Specialities SOLVENTS AND DETERGENTS

PRODUCT

NATURE

APPLICATIONS

The FINADET detergents are designed for the cleaning of production zones, recommended for use in the agrifood industry and for the difficult cleaning-up of all types of pollution.

SPECIFIC ADVANTAGES

DENSITY**

SPECIFICATIONS

FINASOL BAC

Rapid evaporation degreaser

• Degreasing involving mechanical devices: machined parts, chassis, machine tool frames, bearings, pinions, filters, injection moulds. • Surface preparation prior to assembly.

Rapid evaporation. Compatible with all metals, most plastics and elastomers.

785

-

FINASOL HD

Special emulsifiable hydrocarbon degreaser

• Cleaning of all engines: cars, trucks, boats.

Compatible with most plastics and elastomers.

805

-

FINASOL FPI

Synthesis hydrocarbon Benzene-free Aromatic-free

• Degreaser and cleaner for the agrifood industries: machine parts, chassis machine tools, bearings, pinions, filters, chains.

Odourless. Compatible with metals, glass, ceramics, composite materials, most thermoplastics and thermosets insensitive to organic solvents.

742

NSF K1

FINASOL MF

Emulsifiable degreaser

• Multipurpose.

Conducive to complete dissolution of oily pollution and separation of the insoluble components.

809

-

FINADET MF

Overconcentrated detergent

• Difficult cleaning: metal parts, plastics, conveyor belts, tanks, car bodies, brushing or washing machines, floors.

Highly active on every type of pollution: oils, greases, waxes, sludge, and inorganic pollution.

1089

-

FINADET FPI

Special agrifood detergent

• Degreaser and cleaner for the agrifood industries: metal or plastic parts, vehicles designed for transportation of foodstuffs.

Meets the requirements of the food industries.

1086

NSF A1 Menthol perfume

Specialities

FINASOL products are degreasers for the cleaning of engines and a wide variety of materials parts. Their properties make it possible to eliminate greases and separate the insoluble components without affecting the quality of the cleaned elements.

** Density at 25 °C in kg/m3

SPECIAL PRODUCTS FOR THE AGRIFOOD INDUSTRY The NEVASTANE range is specially designed for the agrifood industry and its related activities such as the manufacture of packaging. It is also used in the pharmaceutical and the cosmetics industry.

PRODUCT

50

NATURE

APPLICATIONS

All NEVASTANE products are NSF H1 registered. Their use is essential when a high level of hygiene is required, in compliance with HACCP method. As high-performance products, they provide equipment protection and extended service life while securing the production chain.

SPECIFIC ADVANTAGES

SPECIFICATIONS

NEVASTANE LUBE AEROSOL

Multi purpose adhesive oil

• Small machines requiring almost daily lubrication • Conveyors and rails • Packaging machines

Range of use : -20°C to +150°C. Exceptional adhesion to metal surfaces. Resistant to water, steam and weak acid and alkaline atmospheres.

NSF H1

NEVASTANE GREASE AEROSOL

Water resistant grease

• Bearings, hinges, springs, chains, rails and tools

Range of use : -20°C to +150°C. Excellent resistance to water and steam. Exceptional adhesion to metal surfaces. Insensitive to detergents.

NSF H1

NEVASTANE SILICONE SAFEGARD

Aerosol composed of a high-viscosity silicone oil

• Gliding agent and lubricant.

Use between -40 °C and +200 °C. Insulating, anti-rust and anti-corrosion. Odourless, colourless and non-greasy.

NSF H1 Kosher

NEVASTANE FLUSH OIL

Low-viscosity cleaning and rinsing fluid

• For lubrication of devices and circuits. • Ideal for switching from a standard lubricant to a NSF H1 lubricant.

Excellent solvent power. Elimination of deposits and impurities. Viscosity* : 9.5.

NSF H1 Kosher ISO 21469

NEVASTANE SDO

Sugar dissolving oil

• Application in pure form (recommended) or diluted to: - prevent the accumulation of sugar on machine parts, - dissolve the sugar accumulated in the production areas.

Reduction of maintenance costs and shutdowns. White odourless liquid. Excellent descaling power.

NSF H1 Kosher

NEVASTANE ANTIFREEZE

MPG based antifreeze

• Cooling circuits, including drinks, ice creams and frozen food processing

Antifreeze protection : -15 °C to -40 °C depending on % of dilution. Specific protection of alloys and metal equipment against corrosion.

NSF HT1

NSF H1, suitable for incidental food contact

* Typical kinematic viscosity at 40 °C in mm²/s

51

Specialities ANTIFREEZE AND COOLANTS

Product

NATURE

COOLELF SUPRA

Ready-to-use coolants

GLACELF SUPRA

Over concentrated antifreeze

COOLELF CHP SUPRA

Ready-to-use coolants

GLACELF CHP SUPRA

Over concentrated antifreeze

COOLELF SUPRA GF NP

COOLELF MPG SUPRA

Applications • Diesel industrial engines, gas engines of all sizes.

The performances of the products are enhanced due to organic additives. • Long service life. • Complete preservation of the anti-corrosion properties due to non-consumption of the additives. • Absence of any formation of deposit liable to hinder the heat transfer capacity.

Antifreeze protection

Specific advantages Long life.

-26 °C -20 °C to -69 °C depending on % of dilution

•E  ngines of cogeneration plants. •R  ecommended in countries or conditions where a -7 °C antifreeze protection is sufficient.

Long life. Higher heat transfer capacity.

-7 °C

Ready-to-use coolants

•N  uclear power industry. •R  ecommended in cold countries.

Long life. Higher antifreeze protection.

-37 °C

Ready-to-use coolants

•A  grifood and pharmaceutical industries, cogeneration facilities: heat and cold transfer circuits.

Coolant based on monopropylene glycol.

-26 °C

•D  iesel industrial engines and gas engines requiring no antifreeze protection.

Long life anticorrosion and anticavitation protection. Optimal heat transfer capacity. Non-polluting components.

-7 °C to -15 °C depending on % of dilution

Specifications AFNOR NF R 15-601 • ASTM D 3306, D 4656, D 4985 • BS 6580 • SAE J 1034 MWM (Deutz) • Perkins • GE Jenbacher • Rolls-Royce: Bergen • Waukesha • Wärtsilä • Cummins • MTU • MAN Diesel SAS (SEMT Pielstick) • SNCF AFNOR NF R 15-601 • ASTM D 3306, D 4985 • BS 6580, BS 5117 • SAE J 1034 MWM (Deutz) • Wärtsilä AFNOR NF R 15-601 • ASTM D 3306, D 4656, D 4985, D 5345 • BS 6580, BS 5117 • SAE J 1034

Specialities

COOLELF are ready-to-use coolants. GLACELF are antifreezes for dilution in demineralised water. The antifreeze and coolants protect engines against freezing-up and corrosion of the cooling circuit metals.

EDF PMUC • Wärtsilä

GLACELF MPG SUPRA

Over concentrated antifreeze

WT SUPRA

Aqueous concentrate of specific organic corrosion and cavitation inhibitors

AFNOR NF R 15-601 • ASTM D 4656 • BS 6580

-17 °C to -38 °C depending on % of dilution

AFNOR NF R 15-601 • ASTM D 3306

-

MWM (Deutz) • Wärtsilä

INSULATING OILS Product

NATURE

Applications

Specific advantages

Viscosity*

Specifications

ISOVOLTINE II

Naphthenic mineral (uninhibited)

• For transformers, circuit breakers, contactors and all high-voltage equipment.

High insulating power. Very high resistance to oxidation enabling a considerable service life. Excellent cooling properties.

10

IEC 60296:2003

ISOVOLTINE BIO

Synthetic esters

•T  ransformers. •H  ighly recommended to limit the risks of water pollution and fire.

Biodegradable. Excellent resistance to fire. No danger for the aquatic environment.

22

IEC 61099 • IEC 61100 - K3 OECD 301B • NWG

* Typical kinematic viscosity at 40 °C in mm²/s.

52

53

Greases

TOTAL offers a very wide range of lubricating greases for all applications in a variety of domains: heavy industry (cement plants, iron and steel…), agrifood, papermaking, public works, transport, agriculture and marine. TOTAL lubricating greases can be classified by « Families » depending on the nature of their soap or thickener.

The soap or thickener bestows properties to the greases, such as a multipurpose character, resistance to water, resistance to high temperature, adhesiveness... Within each « Family », the greases will be classified according to their range of applications and specific performances.

LITHIUM/CALCIUM SOAP GREASES

Product MULTIS 2

Applications • Multipurpose grease for general lubrication.

MULTIS 3 MULTIS EP 000 MULTIS EP 00

• Grease for centralized lubrication system, low-diameter systems and gears in casings.

MULTIS EP 0 MULTIS EP 1 MULTIS EP 2

• Multipurpose grease for lubrication of all loaded devices.

Specific advantages Miscible with most conventional soaps. Extended life of the parts due to the excellent resistance of the lubricating film. Enables to rationalize stocks and simplify maintenance operations.

MULTIS EP 3

when the greases have additives. Consequently, MULTIS and LICAL constitute multi-application greases that permit rationalisation of stocks and reduced maintenance costs.

Specifications

NLGI Grade

THICKENER

Range of use

BO Viscosity*

2

Li / Ca

-25 °C to +120 °C

120

L-XBCEA 2

K2K-25

3

Li / Ca

-20 °C to +120 °C

120

L-XBCEA 3

K3K-20

000

Li / Ca

-30 °C to +100 °C

150

L-XCBEB 000

GP000G-30

00

Li / Ca

-30 °C to +100 °C

150

L-XCBEB 00

GP00G-30

0

Li / Ca

-25 °C to +120 °C

150

L-XBCEB 0

MP0K-25

1

Li / Ca

-30 °C to +120 °C

150

L-XBCEB 1

KP1K-30

2

Li / Ca

-25 °C to +120 °C

150

L-XBCEB 2

KP2K-25

3

Li / Ca

-20 °C to +120 °C

150

L-XBCEB 3

KP3K-20

00

Li / Ca

-20 °C to +100 °C

500

L-XBBHB 00

KP2H-20

2

Li / Ca

-20 °C to +120 °C

1300

L-XBCHB 2

KP2K-20

ISO 6743-9

DIN 51502

MULTIS XHV 00

• Extreme pressure multipurpose grease for loaded applications, at low speeds and with the risk of water washout.

MULTIS XHV 2

•E  xtreme pressure multipurpose grease for highly loaded applications, at low speeds with the risk of water washout. •R  ecommended for truck axle trees.

LICAL EP 2

• Extreme pressure multipurpose grease for off-road applications in which water is in frequent contact with the grease: joints, rings, gears, bearings. • Also operates in a dry, polluted environment.

Enables to rationalize stocks and simplify maintenance operations.

2

Li / Ca

-25 °C to +130 °C

190

L-XBDHB 2

KP2K-25

MULTIS MS 2

• Extreme pressure multipurpose grease for loaded applications with shocks and vibrations.

Solid additives enable significant extension of the parts life.

2

Li / Ca / MoS2

-25 °C to +130 °C

150

L-XBCEB 2

MPF2K-25

MULTIS ZS 000

• Extreme pressure synthetic multipurpose grease for very low temperatures. • Typically for centralized system of vehicle chassis, trucks or public works machines.

Extended life of the lubricated parts.

00/000

Li / Ca

-45 °C to +120 °C

42

L-XECFB 00/000 • MP00/000K-45 MAN • Willy Vogel • MB

Multis XLT 2

• Very high-performance PAO synthetic grease for very high speeds and/or low temperatures applications.

Facilitates start-up at very low temperatures. Compatible with plastics. Permits to achieve very high speed factors.

2

Li / Ca

-60 °C to +120 °C

18

L-XECEA 2

Exceptional adhesiveness enables maintenance and shutdown time reductions.

Greases

MULTIS and LICAL lithium/calcium soap greases are multipurpose greases combining good performances in regard to resistance to temperature, resistance to water, pump ability and load resistance that can be excellent

K2K-60

* Typical kinematic viscosity of base oil at 40 °C in mm²/s

54

55

Greases COMPLEX LITHIUM SOAP GREASES

Product MULTIS COMPLEX EP 2 MULTIS COMPLEX EP 3

Applications • Extreme pressure multipurpose grease, high temperatures, high speeds. • For wheel bearings, ball bearings, roller bearings, plain bearings, seals…

Specific advantages Makes it possible to rationalize stocks and simplify maintenance operations.

These greases are also characterized by their mechanical stability and an excellent bleeding value.

Specifications

NLGI Grade

THICKENER

Range of use

BO Viscosity*

2

Li complex

-20 °C to +160 °C

165

L-XBEHB 2

KP2P-20

3

Li complex

-20 °C to +160 °C

165

L-XBDHB 3

KP3N-20

2

Li complex

-30 °C to +160 °C

340

L-XBEHB 2

KP2P-30

ISO 6743-9

DIN 51502

MULTIS COMPLEX HV 2

• Extreme pressure multipurpose grease for loaded applications, high temperatures and high speeds. • For wheel bearings, ball bearings, roller bearings, plain bearings, seals …

MULTIS COMPLEX HV 2 Moly

• Extreme pressure grease for extremely loaded applications, high temperatures and high speeds.

Protection of metal parts, even in the case of very considerable loads, due to solid additives.

2

Li complex / MoS2

-30 °C to +160 °C

340

L-XCEHB 2

KPF2P-30

MULTIS COMPLEX S2 A

• Semi-synthetic high-performance grease for high temperatures and high speeds applications.

Long grease service life.

2

Li complex

-25 °C to +160 °C

120

L-XBEHB 2

KP2P-25

MULTIS COMPLEX SHD 00

• Very high-performance PAO synthetic grease, for slow-to-moderate speed applications, over a wide range of temperatures and heavy loads. • Suitable for gearing in which semi-fluid greases would not guarantee sufficient relubrication intervals.

Low traction coefficient conducive to energy gains and an increase in the service life of the bearings. Operates at low temperatures.

00

Li complex

-50 °C to +160 °C

460

L-XEEHB 00

KP00P-50

MULTIS COMPLEX SHD 32

•V  ery high-performance PAO synthetic grease, for medium-to-very highly loaded applications, over a wide range of temperatures. •R  ecommended for bearings operating at very low temperatures.

2

Li complex

-50 °C to +160 °C

32

L-XEEHB 2

KP2P-50

MULTIS COMPLEX SHD 220

• Very high-performance PAO synthetic grease, for slow-to-moderate speed applications, over a wide range of temperatures and heavy loads. • Recommended in papermaking: felt rolls…

2

Li complex

-40 °C to +160 °C

220

L-XDEHB 2

KP2P-40

MULTIS COMPLEX SHD 460

• Very high-performance PAO synthetic grease, for slow-to-moderate speed applications, over a wide range of temperatures and heavy loads. • Recommended in papermaking: felt rolls…

1/2

Li complex

-40 °C to +160 °C

460

L-XDEHB 1/2

KP1/2P-40

Greases

MULTIS COMPLEX products are high-performance greases made of complex lithium soap. Their high temperature resistant properties are very superior to those of lithium/calcium soap greases.

COMPLEX ALUMINIUM SOAP GREASES COPAL complex aluminium soap greases are characterized by their excellent adhesiveness to metal surfaces. The nature of the complex aluminium soap bestows them also with very good resistance to water washout (standardized water spray test).

Product COPAL EP 00

Applications • Extreme pressure multipurpose and adhesive grease, for high temperatures. • Suitable for shock loaded bearings, heavily loaded transmission, assemblies, traveling cranes, presses.

Specific advantages Very good adhesiveness on metal surfaces.

NB: complex aluminium soap greases are not compatible with the other types of greases.

NLGI Grade

THICKENER

Range of use

BO Viscosity*

00

Complex Al

-20 °C to +150 °C

165

Specifications ISO 6743-9 L-XBDEB 00

DIN 51502 KP00N-20

* Typical kinematic viscosity of base oil at 40 °C in mm²/s

56

57

Greases COMPLEX ALUMINIUM SOAP GREASES

THICKENER

Range of use

BO Viscosity*

Good adhesiveness on metal surfaces.

2

Complex Al

-20 °C to +150 °C

165

L-XBDEB 2

KP2N-20

• Extreme pressure multipurpose and adhesive grease for heavy loads and high temperatures.

Extended life of the parts, even under severe conditions, due to solid additives.

2

Complex Al / MoS2

-20 °C to +150 °C

165

L-XBDEB 2

KPF2N-20

COPAL GEP 0

• Extreme pressure multipurpose and adhesive grease for heavy loads and high temperatures. • Recommended for applications in cement plants: open gears in crusher rings and kiln drive gears.

Protection of the parts, even under very heavy loads, due to solid additives.

0

Complex Al / Graphite

-20 °C to +150 °C

750

L-XBDHB 0

OGPF0N-20

COPAL OGL 0

• Highly adhesive extreme pressure grease, for heavy loads and high temperatures. • Applications in cement plants: open gears in crusher rings and kiln drive gears. • Applications in sugar mills: open gears in sugar cane crusher mills.

Dual solid additivation. Low friction coefficient permitting a significant energy gain together with a reduction in parts wear.

0

Complex Al / MoS2 / Graphite

-20 °C to +150 °C

> 1000

L-XBDHB 0

OGPF0N-20

COPAL OGL 2

• Highly adhesive extreme pressure grease, for heavy loads and high temperatures. • Specially developed for lubrication of open gears when a NLGI 2 grade is required.

2

Complex Al / MoS2 / Graphite

-15 °C to +150 °C

> 1000

L-XBDHB 2

OGPF2N-15

COPAL SPRAY

• Grease loaded with solid lubricants. • For joints, open gears and cables.

1

Complex Al / Graphite

-30 °C to +120 °C

-

COPAL EP 2

• Extreme pressure multipurpose and adhesive grease, for high temperatures. • Suitable for shock loaded bearings, heavily loaded transmission, assemblies, traveling cranes, presses.

COPAL MS 2

Permits local application of all surfaces.

ISO 6743-9

DIN 51502

Aerosol

Greases

Applications

Specific advantages

Specifications

NLGI Grade

Product

POLYUREA THICKENER GREASES ALTIS polyurea greases are top-of-the-range products specially designed for applications at high temperatures and high speeds.

Product

Applications

Specific advantages

The polyurea thickener permits the greases to fluidify when subjected to heavy loads and speeds, and to revert to its initial state when at rest. ALTIS are consequently especially suitable in the case of lifelong lubrication or long lubrication intervals.

NLGI Grade

THICKENER

Range of use

BO Viscosity*

Specifications ISO 6743-9

DIN 51502

ALTIS EM 2

• Multipurpose grease for high temperatures and high speeds. • Typically used in electric engine bearings.

Reduction in vibrations.

2

Polyurea

-20 °C to +180 °C

110

L-XBFBA 2

KP2R-20

ALTIS MV 2

• Multipurpose grease for high temperatures, high speeds and et medium-to-high loads. • Typically used in fan bearings, roller bearings and direction systems in the dry parts of paper mills.

Intermittent operating authorized.

2

Polyurea

-20 °C à +160 °C

160

L-XBEEB 2

KP2P-20

ALTIS SH 2

•V  ery high-performance synthetic grease for a wide range of temperatures. •S  pecially developed for 1st fill applications as part of lifelong lubrication.

Reduction in vibrations. Energy gains. Permits to reach high speeds over a wide temperature interval.

2

Polyurea

-40 °C to + 180 °C

80

L-XDFEB 2

KP2R-40

* Typical kinematic viscosity of base oil at 40 °C in mm²/s

58

59

Greases COMPLEX CALCIUM SULFONATE SOAP GREASES

Product

Applications

CERAN CA

• Semi-fluid adhesive and extreme pressure grease for metal cables, rails, winches, chains.

CERAN AD PLUS

• Highly adhesive, extreme pressure grease adapted to severe conditions. • For metal cables, rails, winches, capstans, open gears and chains. • Recommended in cement plants, mines, quarries, offshore.

CERAN ST 2

• Highly adhesive extreme pressure grease adapted to the presence of water, high temperatures and heavy loads. • For varied applications in industry (coiler, rolling mill) and offshore environment (cables, gearing).

CERAN GEP

CERAN WR 1

Specific advantages Extended life of parts subjected to heavy loads. No loss of significant consistency on contact with water.

• Remarkable anti-wear and load resistance properties. • Exceptional resistance to water, permitting operation in the presence of water contents greater than 40% of water, without any degradation of performances, in specific cases. • Excellent mechanical stability and high shearing resistance. • Resistance at low temperature. • Very good resistance to oxidation and corrosion.

NLGI Grade

THICKENER

Range of use

BO Viscosity*

Specifications ISO 6743-9

DIN 51502

0

Complex Ca sulfonate

-25 °C to +150 °C

325

L-XBDIB 0

OGPON-25

0/1

Complex Ca sulfonate

-20 °C to +150 °C

> 1700

L-XBDIB 0

OGPON-20

Rationalisation of stocks and lengthening of lubrication intervals.

2

Complex Ca sulfonate

-25 °C to + 180 °C

180

L-XBFIB 2

KP2R-25

• Adhesive and extreme pressure grease, adapted to high temperatures and heavy loads. • For gears, transmissions. • For open gears of sugar cane crusher mills.

Solid additives and good adhesiveness enable significant extension of the service life of the parts.

0

Complex Ca sulfonate / Graphite

-20 °C to + 180 °C

695

L-XBFHB 0

OGPF0R-20

•E  xtreme pressure multipurpose grease

Rationalisation of stocks.

1

Complex Ca sulfonate

-25 °C to + 180 °C

180

L-XBFIB 1

KP1R-25

2

Complex Ca sulfonate

-25 °C to + 180 °C

180

L-XBFIB 2

KP2R-25

1/2

Complex Ca sulfonate

-25 °C to + 180 °C

420

L-XBFHB 1/2

KP1/2R-25

CERAN WR 2 CERAN HV

• Extreme pressure multipurpose grease

Extended life of parts. Extension of lubrication intervals

CERAN HVA

• Extreme pressure multipurpose grease adapted to high temperatures and heavy loads. • Recommended for the iron and steel industry: bearings subjected to heavy loads, high temperatures and humidity.

Excellent resistance to oxidation. Extended life of parts. Extension of lubrication intervals.

2

Complex Ca sulfonate

-25 °C to + 180 °C

420

L-XBFHB 2

KP2R-25

CERAN LT

• Extreme pressure grease adapted to low temperatures. • For industrial equipment and public works.

Performance at low temperatures.

1/2

Complex Ca sulfonate

-40 °C to +150 °C

80

L-XDDIB 1/2

KP1/2N-40

CERAN MM

•E  xtreme pressure multipurpose grease adapted to the presence of water. •S  pecially developed for ball bearings, roller bearings, seals, chassis or any components subjected to shocks and vibrations.

Rationalisation of stocks. Efficient even in the presence of water and/or dust.

2

Complex Ca sulfonate

-30 °C to + 180 °C

110

L-XCFIB 2

KP2R-30

CERAN PM

• Specially developed for papermaking applications. • Adapted for bearings subjected to heavy loads, high temperatures and humidity.

Extension of service life of parts even under very severe operating conditions. Increase in lubrication intervals.

1/2

Complex Ca sulfonate

-25 °C to + 180 °C

325

L-XBFIB 1/2

KP1/2R-25

CERAN MS

• Extreme pressure multipurpose grease adapted to very heavy loads and very high temperatures, with the risk of shocks and vibrations.

Solid additives enabling a significant extension of the service life of the parts.

1/2

Complex Ca sulfonate / MoS2

-20 °C to + 180 °C

650

L-XBFHB 1/2

KPF1/2R-20

Greases

CERAN complex calcium sulfonate soap greases are high-technology products developed by TOTAL over many years. The manufacturing process of calcium sulfonate soap greases requires genuine expertise to achieve the exceptional properties level of CERAN.

* Typical kinematic viscosity of base oil at 40 °C in mm²/s

60

61

Greases SPECIAL GREASES APPLICATIONS

SPECIFIC ADVANTAGES

NLGI GRADE

THICKENER

RANGE OF USE

BO VISCOSITY*

SPECIFICATIONS ISO 6743-9

DIN 51502

CALORIS 23

• Grease adapted to high temperatures and low speeds.

Resistant to acid and alkaline atmospheres.

2/3

Bentone

-15 °C to +160 °C

500

L-XAEEA 2/3

M2/3P-15

CALORIS MS 23

• Grease adapted to high temperatures, low speeds, heavy loads and a risk of shocks.

Solid additives enabling a significant extended life of the parts. Resistance to acid and alkaline atmosphere.

2/3

Bentone / MoS2

-15 °C to +160 °C

500

L-XAEEA 2/3

MF2/3P-15

MARSON SY 00

• Synthetic PAG grease adapted to heavy loads. • For worm gear pairs, casing gears or fitted devices.

Marked reduction in the friction coefficient. Permits lifelong lubrication in certain cases.

00

Li

-35 °C to +130 °C

145

L-XCCEB 00

GPGP00K-35

MARSON SY 2

• Synthetic PAG grease adapted to heavy loads. • For applications in contact with petroleum liquids dispensers.

Resistant to hydrocarbon washout.

2

Li

-40 °C to +120 °C

145

L-XDCEA 2

MPPG2K-40

SPECIS CU

• Anti-seizing grease for threaded assembly under severe corrosion conditions, water vapour, gasses.

Easy dismounting of components in a moist atmosphere or wet environment. Seizing prevention.

1

Bentone / Copper

-20 °C to + 300 °C

500

L-XBGBB 1

MPF1U-20

SPECIS B 4851-2

• Lubrication and protection of strands for pre-stressed concrete. • Insulating grease adapted for electric cables.

Protection against corrosion, even in a moist atmosphere and in the presence of seawater.

2/3

Li

-15 °C to +120 °C

-

L-XBCFA 2 In compliance with XP A 35-037

K2K-15

STATERMIC XHT

• Special fluorine compounds-base grease for very high temperatures and medium-to-heavy loads.

Reduced friction coefficient of most plastics and metals. Extended life of the lubricated parts.

2

Fluorine

-25 °C to + 250 °C

147

L-XBGDB 2

KFKP2U-25

STATERMIC NR

• Special fluorine compounds-base grease for high temperatures, resistant to powerful acids, halogenated compounds, alcohols, oxidants and radiations.

Protection of lubricated parts even in the presence of acids, halogenated alcohols, oxidants or in the presence of radiation.

2

Fluorine

-25 °C to + 250 °C

375

NSF H1

KFKP2U-25

• Packer grease for autoclaves, reactors under pressure or in a vacuum, among other in the chemicals industry.

Extended life of the equipment. Contribution to the tightness of the equipment.

3

Ca

0 °C to +100 °C

69

NLGI GRADE

THICKENER

RANGE OF USE

BO VISCOSITY*

AXA GA 3

Greases

PRODUCT

L-XBGDB 2

L-XABGA 3

K3G 0

BIODEGRADABLE GREASES PRODUCT

62

APPLICATIONS

SPECIFIC ADVANTAGES

SPECIFICATIONS ISO 6743-9

DIN 51502

BIOMERKAN RS

• Water-resistant biodegradable grease. • Recommended for marine uses and agriculture.

Resistance to water washout.

3

Ca

-20 °C to + 90 °C

32

L-XBBEA 3

ME3E-20

BIOMULTIS SEP 2

• Biodegradable grease for wheel bearings, heavily loaded bearings and high temperatures.

Biodegradability > 95% (CEC-L-33A-T93). Reduction in maintenance costs.

2

Li

-35 °C to +150 °C

55

L-XDDEB 2

KPE2N-35

NSF H1, suitable for incidental food contact

Biodegradable

* Typical kinematic viscosity of base oil at 40 °C in mm²/s

63

Greases NSF H1 GREASES FOR THE AGRIFOOD INDUSTRY NEVASTANE, CERAN FG and AXA GR1 greases are NSF H1 registered for their suitability for accidental food contact. These products are essential when a high level of hygiene is required. High-performance products, they protect equipment and prolong their service life whilst securing the production chain.

PRODUCT NEVASTANE HT/AW 0 NEVASTANE HT/AW 1

• Multipurpose grease adapted to high and medium speeds in the agrifood industry. • For centralised lubrication, bottling equipment, and plain bearings.

SPECIFIC ADVANTAGES Extended life of the equipment. Excellent protection against corrosion. Resistance to water.

NEVASTANE HT/AW 2 NEVASTANE HD2T

THICKENER

RANGE OF USE

BO VISCOSITY*

00

Complex AI

-20 °C to +150 °C

105

2 2

• Synthetic grease adapted to high temperatures. • For various type of bearings and sterilizers in canneries.

Extension of lubrication intervals. Wide range of use. Excellent resistance to water.

1

NEVASTANE HPX

• High-performance extreme-pressure grease adapted to low and medium speeds, heavy loads and shocks. • For pelleting machines.

Extension of lubrication intervals and service life of equipment. Excellent resistance to water.

CERAN FG

• Extreme-pressure grease adapted to low and medium speeds, heavy loads and shocks. • For pelleting machines. • Multipurpose extreme-pressure grease. • For bearings and joints.

AXA GR1

NSF H1• Kosher

1

Very good adhesive power as regards metal. Excellent protection against corrosion. Resistant to water washout.

NEVASTANE SFG 2

SPECIFICATIONS ISO 21469

0

• Multipurpose extreme pressure and anti-wear grease. • For crimping machines, bottling machines, harvesting machines and all loaded bearings.

NEVASTANE SFG 1

64

NLGI GRADE

NSF H1, suitable for incidental food contact

Complex Al

-20 °C to +150 °C

130

NSF H1• Kosher ISO 6743-9: L-XBDHB 2 • ISO 21469 • DIN 51502: KP2N-20

Complex Ca sulfonate

-40 °C to +180 °C

-

1/2

Complex Ca sulfonate

-25 °C to +180 °C

320

NSF H1

Prolongs service life of parts. Maintains the equipment performances in the presence of water.

1/2

Complex Ca sulfonate

-25 °C to +180 °C

100

NSF H1

Protection against corrosion even in the presence of water. Extended life of equipment.

1

Complex Ca

-20 °C to +150 °C

2

NSF H1• Kosher

Greases

NEVASTANE HT/AW 00

APPLICATIONS

NEVASTANE is the range specifically designed for the agrifood industry and its related activities such as the manufacture of packaging. It is also used in the pharmaceutical and the cosmetics industries.

ISO 6743-9: L-XBFIB 2 • DIN 51502: KP2R-25 150

NSF H1 ISO 6743-9: L-XBDIB 1 • ISO 21469 • DIN 51502: KP1N-20

* Typical kinematic viscosity of base oil at 40 °C in mm²/s

65

Appendix

TECHNICAL DATA

STORAGE, SAFETY, HEALTH, ENVIRONMENT

Measuring kinematic viscosity

Recommendations for storage

In the international measurement system, kinematic viscosity is expressed in mm2 per second.

1 • Store the products in a frost-free environment. Special case of soluble oils: storage between 5 °C and 40 °C. 2 • Store drums and kegs on their side with both bungs in a horizontal position (9h and 15h), to prevent drying-out of seals and admission of air. 3 • Store packaging on blocks insulating them from the ground. Once a year, turn them over to oil the non-immersed walls. 4 • If steps 1 and 2 cannot be implemented, store the drums upside down with the bungs at the bottom.

ISO VG  The international ISO VG classification allows to classify oils according to their viscosity. The ISO VG grade corresponds by convention to the median point of a kinematic viscosity interval in mm2/s at 40 °C.

ISO classification des lubricants as a function of their viscosity (ISO 3448 standard)

66

Median kinematic viscosity at 40 °C in mm2 /s

Recommendations for use

Kinematic viscosity range at 40 °C in mm2 /s Mini

Maxi

The NLGI (National Lubricating Grease Institute) grade expresses the consistence of greases. Classification is carried out on the basis of « worked penetration » at 25 °C.

ISO VG 2

2.2

1.98

2.42

ISO VG 3

3.2

2.88

3.52

NLGI grade

ISO VG 5

4.6

4.14

5.06

000

445 - 475

ISO VG 7

6.8

6.12

7.48

00

400 - 430

ISO VG 10

10

9

11

0

355 - 385

ISO VG 15

15

13.5

16.5

1

310 - 340

ISO VG 22

22

19.8

24.2

2

265 - 295

ISO VG 32

3

220 - 250

32

28.8

35.2

ISO VG 46

46

41.4

50.6

ISO VG 68

68

61.2

74.8

ISO VG 100

100

90

110

ISO VG 150

150

135

165

ISO VG 220

220

198

242

ISO VG 320

320

288

352

ISO VG 460

460

414

506

ISO VG 680

680

612

748

ISO VG 1000

1000

900

1100

• PAG: Poly Alkylene Glycols

ISO VG 1500

1500

1350

1650

• PAO: Polyalphaolefins

ISO VG 2200

2200

1980

2420

ISO VG 3200

3200

2880

3520

Worked penetration at 25 °C (1/10 th mm)

Abbreviations • HACCP: “Hazard Analysis and Critical Control Point”. A risk analysis and critical control point method, in the agrifood industry.

 • Follow the FIFO system: first in, first out. 5 6 • Note opening date on the packaging. 7 • Wipe the surroundings of the openings. 8 • Close the packaging after each sampling.

Safety and health

Appendix

ISO viscosity class

NEVER STORE PACKAGING UPRIGHT WITH BUNGS AT THE TOP AND OUTSIDE.

NLGI Grade

 Virtually all the lubricants are non-flammable under ambient conditions. However, they need to be stored at a distance from: • Oxidizing, corrosive or inflammable substances: chlorine, oxygen, acids, bases, solvents, etc. • Hot surfaces or fire points. • Electric contacts.

For access to material safety data sheets please visit www.quickfds.com

Environment  The storage areas must permit easy recovery (pumping, absorption) in the event of accidental leaks, with no discharges into the natural environment. A tank or a holding facility is recommended, even mandatory, depending on the legislation in force.

• HSE: Health, Safety, Environment. • FZG: Forschung für ZahnradGetriebe. Method for assessing the extremepressure properties of lubricants, ISO 14635 standard.

• POE: Polyol Esters • TOST: Turbine Oil Stability Test, ASTM D943 standard. 67

www.lubricants.total.com Material Safety Data Sheets available at www.quickfds.com

TOTAL LUBRIFIANTS

562 avenue du Parc de l’île 92029 Nanterre Cedex - France Tel: +33 1 41 35 40 00

You know where to turn

© 02/2010 TOTAL Lubrifiants SA 552 006 454 RCS Nanterre. All rights reserved. Non contractual document. Design and layout: R2D2 communication. Credits: N. Bratslavsky, T. Emerson, O. Florin Rosu, Fotohansi, C. Larue, S. Mueller/Foolia - Asia Images Group/Getty images - P. Adenis, P. Boulen, G. Perrin, M. Roussel, J. Schulzki/TOTAL-Direction de la communication

Sales presence in over 160 countries through the Subsidiaries and Distributors