Smart Metering
Smart Building
Smart Energy
LoRaWANTM TIC SENSOR The TIC SENSOR is a LoRaWANTM Class C sensor radio transmitting the customer tele-information (TIC) from residential electric meters as well as data from any pulse meters (water, gas, electricity, energy) and current from 2 electrical lines by using split core current transformers.
LoRaWANTM TIC Sensor – V2.1 Updated 21/09/2017 - This document is the property of nke Watteco. Information contained within is not contractual and is susceptible to modifications without advance notice
APPLICATIONS § Wireless AMR – Smart metering § Real time monitoring of energy consumption § Building management – Monitoring of water and gas meter combined with TIC Data
§ Current consumption per usage: Monitoring of current consumption on 2 electrical lines
BENEFITS & KEY FEATURES § LoRaWANTM, Class C § Easy to deploy and use ü PTSM connector for TIC Signal ü DIN Rail 1U § 2 pulse inputs § 2 current transformer inputs § Electronic meter supported: ü CBEMM ü CBEMM-ICC ü CJE ü ICE § Data compression for batch report
QUALITY & RELIABIITY § RoHS compliant § CE Compliant § Radio-equipment directive 2014/53/UE The TIC SENSOR from nke Watteco is wireless sensor operating from any wireless network using the LoRaWANTM , Class C protocol. It has been designed to monitor and transmit the TIC data (index, base, consumption, active and reactive power, ..) from homes, offices, administrative centres and small industrial premises. Two pulse inputs allows fast and cost-effective integration of any pulse meter into a LoRaWANTM network without expensive and time-consuming cabling. Two Current Transformer inputs enables to easily measure and control the current consumption of any electrical lines up to 80A. Larger current could be measured according to end user needs upon request.
If the variation of one power, active/reactive threshold set by the generated allowing to disturbances.
of the parameter (active/reactive energy, ..) is greater than the user an alarm is automatically track and analysis electrical line
The measured parameters can be locally stored, concatenated and compressed. This unique batch mechanism significantly reduce the amount of data transmission for demanding applications such as loading curve. The standard DIN rail mount design allows easy mounting and fast connections to the electrical board.
NKE WATTECO, YOUR PARTNER IN SMART SENSORS & ACTUATORS We are a European leader in designing and manufacturing highly reliable and low power consumption smart sensors, actuators and multiprotocol remote data solutions. nke Watteco is an adopter member of the LoRa® Alliance © nkeWatteco - Head Quarter: rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 36 10 12 Paris Office: 33, rue Pierre Marin, 91270 Vigneux sur Seine, France - Tel +33(0)1 69 52 28 31 For further information, please contact us:
[email protected] - www.nke-watteco.com
LoRaWANTM TIC SENSOR TECHNICAL CHARACTERISTICS Frequency (MHz)
EU: 863-870 US: 902-928 (On demand)
Transmit Power (dBm)
+14
Receiver Sensitivity (dBm) FIRMWARE
-136
Protocol
LoRaWANTM, Class C
Transmission cycles
10mn, 1h, 12h or defined by network
Data history
Available
Activation method
Activation by Personnalization (ABP) Over-The-Air Activiation (OTAA)
Data encryption TIC
AES128
Electronic Meter supported
"Blue" electronic single-phase, multi-rate meter (CBEMM) "Blue" electronic single-phase, multi-rate meter (CBEMM - ICC upgrade) "Yellow" electronic meter (CJE) "Emeraude Customer Interface" (ICE) meter
Connector type PULSE INPUTS
PTSM
Number of input
2
Voltage (V)
3 - 30
Frequency (Hz) 1 - 100 SPLIT CORE CURRENT TRANSFORMER Number of input
2
Measure (A)
Range Accuracy
Calibration
Ready to use with Zemming Zemctk02 split core current transformer For other core current transformer a calibration might be required
(with CR Magnetics 3110/3000)
: 0 - 90 : +/- 2%
ALARMS
Active/Reactive Power
Occurs when variation is greater than the threshold set by the user
Active/Reactive Energy POWER
Occurs when variation is greater than the threshold set by the user
Power supply (VAC) INTERFACE
230
LED Indicator
Network pairing & configuration
Switches MECHANICAL FEATURES
Reset, ON/OFF
DIN Rail Dimension (mm)
1U – 89 x 60 x 18
ENVIRONMENTAL
Operating temperature (°C) DIRECTIVES & STANDARD
-20 / +50
EN, 61000-4-2 EN 300-220-1 V2-4-1, EN 301 489 V1-6-1 CE and RoHS recommendation compliant
ORDERING INFORMATION REFERENCE
MODEL DESCRIPTION
50-70-002
LoRaWANTM TIC SENSOR + 2S0
50-70-038
LoRaWANTM TIC SENSOR + 2S0 + 2 CURRENT TRANSFORMERS
© nkeWatteco - Head Quarter: rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 36 10 12 Paris Office: 33, rue Pierre Marin, 91270 Vigneux sur Seine, France - Tel +33(0)1 69 52 28 31 For further information, please contact us:
[email protected] - www.nke-watteco.com
LoRaWANTM TIC Sensor – V2.1 Updated 21/09/2017 - This document is the property of nke Watteco. Information contained within is not contractual and is susceptible to modifications without advance notice
RF TRANSCEIVER
