LoRaWANTM SMART PILOT WIRE

§ Smart Building –Electric heater and water heater ... BENEFITS & KEY FEATURES ... Magnetic Switch Reset,ON/OFF MECHANICALFEATURES...

0 downloads 41 Views 2MB Size
Smart Metering

Smart Building

Smart Energy

LoRaWANTM SMART PILOT WIRE The SMART PILOT WIRE is a Class C LoRaWANTM actuator that monitors and control up to 6 operating mode for any electric heater as well as any active load (ON/OFF) driven by a relay.

APPLICATIONS § Smart Building – Electric heater and water heater LoRaWANTM Smart Pilot Wire– V2.1 Updated 21/09/2017 - This document is the property of nke Watteco. Information contained within is not contractual and is susceptible to modifications without advance notice

remote management

§ Demand side management – active load control (ON/OFF) of any devices driven by a relay

§ Smart Lighting – Switch ON/OFF street light § HVAC & building management – monitor and control valves, pumps, fans, heaters/coolers, lights…

BENEFITS & KEY FEATURES § § § § §

LoRaWANTM, Class C Easy to use and deploy Active load monitoring and control Data compression for batch status report Class II protection

QUALITY & RELIABIITY § CE Compliant § RoHS compliant § Radio-equipment directive 2014/53/UE The Class C LoRaWANTM SMART PILOT WIRE from nke Watteco is a long range, high performance and high quality wireless actuator having two specific operating mode: - Smart pilot wire actuator to monitor and control electric heaters - Switched relay to monitor and control any devices connected to the relay (street lights, residential lights, pumps, fans, valves, motors, generators, …)

The SMART PILOT WIRE status can be locally stored, concatenated and compressed. This unique batch mechanism significantly reduce the amount of data transmission when reporting the status history of the SMART PILOT WIRE output .

When operating as a SMART PILOT WIRE, the actuator control up to 6 heating modes: - Comfort: track, monitor and report the temperature set point of the heater. - Eco: temperature set and track 4°C below the temperature set point of the heater - Anti-freeze: maintain room temperature at +5°C - Stop: no heating - Comfort – 1: Temperature set and track 1°C below the temperature set point of the heater - Comfort – 2: Temperature set and track 2°C below the temperature set point of the heater

NKE WATTECO, YOUR PARTNER IN SMART SENSORS & ACTUATORS We are a European leader in designing and manufacturing highly reliable and low power consumption smart sensors, actuators and multiprotocol remote data solutions. nke Watteco is an adopter member of the LoRa® Alliance © nkeWatteco - Head Quarter: rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 36 10 12 Paris Office: 33, rue Pierre Marin, 91270 Vigneux sur Seine, France - Tel +33(0)1 69 52 28 31 For further information, please contact us: [email protected] - www.nke-watteco.com

LoRaWANTM SMART PILOT WIRE TECHNICAL CHARACTERISTICS Frequency (MHz)

EU: 863-870 US: 902-928 (On demand)

Transmit Power (dBm)

+14

Receiver Sensitivity (dBm)

-140

Antenna FIRMWARE

embedded

Protocol

LoRaWANTM, Class C

Transmission cycles

10mn, 1h, 12h or defined by network

Activation method

Activation by Personalization (ABP) Over-The-Air Activation (OTAA)

Data encryption ELECTRIC HEATER APPLICATION

AES128

Comfort

Track the temperature set point of the heater

Eco

Temperature set and track 4°C below the temperature set point of the heater

AntiFreeze

Maintain room temperature at +5°C

Stop

No heating

Comfort -1

Temperature set and track 1°C below the temperature set point of the heater

Comfort -2 SWITCHED RELAY CONTROL

Temperature set and track 2°C below the temperature set point of the heater

ON

Switch ON

OFF POWER

Switch OFF

Power supply (VAC)

230

INTERFACE LED Indicator

3 LEDs for Configuration, Network pairing & Activity on inputs

Magnetic Switch MECHANICAL FEATURES

Reset, ON/OFF

Dimension (mm)

76 x 41 x 17

Operating temperature (°C) DIRECTIVES & STANDARD

-20 / +50

EN, 61000-4-2 EN 300-220-1 V2-4-1, EN 301 489 V1-6-1 CE and RoHS recommendation compliant NF EN 55014-1 and 2, NF EN 55022 (June 2012), EN 60335 Class II

ORDERING INFORMATION REFERENCE

MODEL DESCRIPTION

50-70-027

LoRaWANTM SMART PILOT WIRE

© nkeWatteco - Head Quarter: rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 36 10 12 Paris Office: 33, rue Pierre Marin, 91270 Vigneux sur Seine, France - Tel +33(0)1 69 52 28 31 For further information, please contact us: [email protected] - www.nke-watteco.com

LoRaWANTM Smart Pilot Wire – V2.1 Updated 21/09/2017 - This document is the property of nke Watteco. Information contained within is not contractual and is susceptible to modifications without advance notice

RF TRANSCEIVER