LoRaWANTM PULSE S0 SENSOR

§ Wireless AMR – Smart metering § Infrastructure: all meters with pulse interface can be integrated quickly and cost -effectively into a LoRaWANTM net...

0 downloads 40 Views 247KB Size
Smart Metering

Smart Building

Smart Energy

LoRaWANTM PULSE S0 SENSOR PULSE S0 is a LoRaWANTM sensor radio transmitting data from any residential pulse meters: water, gas, electricity, energy.

LoRaWANTM Pulse S0 Sensor – V3.0 Updated 06/12/2016 - This document is the property of nke Watteco. Information contained within is not contractual and is susceptible to modifications without advance notice

APPLICATIONS § Wireless AMR – Smart metering § Infrastructure: all meters with pulse interface can be integrated quickly and cost-effectively into a LoRaWANTM network without expensive and timeconsuming cabling.

BENEFITS & KEY FEATURES § § § § §

LoRaWANTM, Class A Easy to use and deploy Data compression for batch report Minimum autonomy: 3 years ATEX Certified Zone 2

QUALITY & RELIABIITY § CE Compliant § RoHS compliant § Radio-equipment directive 2014/53/UE

The Class A LoRaWANTM PULSE S0 from nke Watteco is a long range, low power consumption, high performance and high quality wireless up or down pulse sensor transmitting data from water, gas, electricity & energy meters.

Powered through a lithium battery, it allows an autonomy of at least 3 years when transmitting data one time per day.

The PULSE S0 SENSOR operates with any commercial meter products and provides connection to any wireless network using the LoRaWANTM protocol. The measured parameters (up or down pulses and battery voltage) can be locally stored, concatenated and compressed. This unique batch mechanism significantly reduce the amount of data transmission for demanding applications and drastically increase the autonomy.

NKE WATTECO, YOUR PARTNER IN SMART SENSORS & ACTUATORS We are a European leader in designing and manufacturing highly reliable and low power consumption smart sensors, actuators and multiprotocol remote data solutions. nke Watteco is an adopter member of the LoRa® Alliance © nkeWatteco - Head Quarter: rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 36 10 12 Paris Office: 33, rue Pierre Marin, 91270 Vigneux sur Seine, France - Tel +33(0)1 69 52 28 31 For further information, please contact us: [email protected] - www.nke-watteco.com

LoRaWANTM PULSE S0 SENSOR TECHNICAL CHARACTERISTICS

Transmit Power (dBm)

EU: 863-870 US: 902-928 (On demand) +14

Receiver Sensitivity (dBm)

-140

FIRMWARE Protocol

LoRaWANTM , Class A

Transmission cycles

10mn, 1h, 12h or defined by network

Data history

Available

Frequency (MHz)

Data encryption

Activation by Personalization (ABP) Over-The-Air Activation (OTAA) AES128

SENSOR INPUT Number of inputs

1

Impedance (MW)

>1

Capacitance (nF)

1; typical

Voltage (V)

0 - 75

Current (µA)

3.5

Frequency (Hz)

1 - 500

Anti-bounce

from 0 to 1 minute in i125ms increments

Activation method

POWER Power supply

3,6V / 1200mAh lithium battery - ATEX certified Zone 2 (option)

Autonomy

> 3 years for 1 transmission per day

INTERFACE LED Indicator

3 LEDs for Configuration, Network pairing & Activity on inputs

Switch

Reset, ON/OFF

MECHANICAL FEATURES Dimension (mm) Operating temperature (°C)

-20 / +50

Storage temperature (°C)

-10 / +60

DIRECTIVES & STANDARD EN, 61000-4-2 EN 300-220-1 V2-4-1, EN 301 489 V1-6-1 CE and RoHS recommendation compliant

ORDERING INFORMATION REFERENCE 50-70-001

MODEL DESCRIPTION LoRaWANTM PULSE S0 SENSOR

© nkeWatteco - Head Quarter: rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 36 10 12 Paris Office: 33, rue Pierre Marin, 91270 Vigneux sur Seine, France - Tel +33(0)1 69 52 28 31 For further information, please contact us: [email protected] - www.nke-watteco.com

LoRaWANTM Pulse S0 Sensor – V3.0 Updated 06/12/2016 - This document is the property of nke Watteco. Information contained within is not contractual and is susceptible to modifications without advance notice

RF TRANSCEIVER