FILTER

TECHNICAL DATA FIL 100 FIL 100 FIL 200 FIL 200 FIL 200 FIL 300 FIL 300 FIL 300 ... • minimum load loss with changes in ... using the computerized test...

0 downloads 341 Views 511KB Size
FILTER The Job of the filter is to remove any solid or liquid impurities from the air generated by the compressor. Incoming air is rotated by the centrifuge unit. The heaviest liquid and solid particles are projected against the walls of the container and forced to adhere to it. As they accumulate they form drops that deposit on the bottom by gravity. The remaining solid particles are held back by the porous element depending on the filtering threshold. The condensate accumulation area is kept still to prevent previously deposited impurities from being re-circulated. The accumulated condensate is drained out through the drain – automatically when there is no pressure in the filter, or by hand pressing the button. An automatic drain is available. It automatically eliminates condensate from the container whenever necessary, whatever the pressure.

TECHNICAL DATA Threaded port Degree of filtration Max. input pressure

Flow rate at 6.3 bar (0.63 MPa-91 psi) ΔP 0.5 bar (0.05 MPa – 7 psi) Flow rate at 6.3 bar (0.63 MPa-91 psi) ΔP 1 bar (0.1 MPa – 14 psi) Fluid Max temperature at 1 MPa; 10 bar; 145 psi Weight Wall fixing screws Mounting position Drain

Bowl capacity NOTE ON USE

FIL 100

MPa bar psi Nl/min scfm Nl/min scfm °C °F Kg

cm3

FIL 100

1/4’’ 3/8’’ 5␮m 20␮m 50␮m 1.5 15 217 1400 50 2000 71 Compressed air 50 122 0.4 M4x50 Vertical Manual Manual/semi-auto (RMSA) Automatic (SAC) 22

FIL 200 1/4’’

FIL 200

FIL 200

3/8’’ 1/2’’ 5␮m 20␮m 50␮m 1.3 13 188 2400 85 3100 110 Compressed air 50 122 0.7 M5x60 Vertical Manual Manual/semi-auto (RMSA) Automatic (SAC) - Automatic (RA) 45

FIL 300

FIL 300

FIL 300

1/2’’

3/4’’ 1’’ 5␮m 20␮m 50␮m 1.3 13 188 3800 135 5300 188 Compressed air 50 122 1.4 M5x70 Vertical Manual Manual/semi-auto (RMSA) Automatic (RA) 75

The maximum inlet pressure for the version with RA automatic condensate drainage must not exceed 10 bar.

COMPONENTS 햲 Technopolymer body 햳 Zamak end plate 햴 Technopolymer centrifuge 햵 Bowl: technopolymer for FIL 100 and FIL 200, metal for FIL 300 햶 Technopolymer baffle 햷 Sintered HDPE filter cartridge 햸 Technopolymer screen 햹 Clear technopolymer glass 햺 NBR gaskets 햻 Drain (RMSA)

1 2 3 4 5 6 7 8 9 10

3.1/06

FLOW CHARTS FIL 100 1/4 - 3/8

• Flow tests carried out at the Department of Mechanics, Turin Polytechnic, using the computerized test bench following CETOP RP50R recommendations (ISO DIS 6358-2-approved) with ISO 5167 diaphragm gauge. (A) = 2 bar - 0,2 MPa - 29 psi (D) = 8 bar - 0,8 MPa - 116 psi (B) = 4 bar - 0,4 MPa - 58 psi (E) = 10 bar - 1 MPa - 145 psi (C) = 6 bar - 0,6 MPa - 87 psi

FIL 200 1/4 - 3/8 - 1/2

FIL 300 1/2 - 3/4 - 1

3

DIMENSIONS

FIL 100 FIL 100 FIL 200 FIL 200 FIL 200 FIL 300 FIL 300 FIL 300 G 1/4

A E H

C

D F

I

G

G 3/8 78 144 50 43 63 26 G 1/4 G 3/8 43 21.5 M4 hole 137

G1/4

G 1/4

G 3/8 93.5 175 63 55 78.5 36 G 3/8 55.5 27.5 M5 hole 196

G 1/2

G 1/2

G 1/2 G 3/4 110 195 72 65 92 42 G 1/2 G 3/4 65 32.5 M5 hole 215

G 1’’ 112

G 1’’

M

B

L

A B C D E F G H I L M

3.1/07

400 FILTER Filter with different degrees of impurity treatment and high performance: • minimum load loss with changes in flow rate • maximum degree of condensate separation • 360° condensate level display • semi-auto or auto condensate drain

TECHNICAL DATA Threaded port Degree of filtration Max. input pressure

Flow rate at 6 bar (0.6 MPa-87 psi) ΔP 0.5 bar (0.05 MPa – 7 psi) Fluid Max temperature at 1 MPa; 10 bar; 145 psi Weight Wall fixing screws Mounting position Drain Bowl capacity Notes on use

FIL 400 G1’’

MPa bar psi Nl/min scfm °C °F Kg

cm3

G1’’1/4’’ G1’’1/2 G2’’ 5␮m 20␮m 50␮m 5␮m 20␮m 50␮m 1.3 1.3 13 13 188 188 16500 20000 590 710 Compressed air Compressed air 50 50 122 122 5.2 6 M6x110 M6x110 Vertical Vertical Manual/semi-auto (RMSA) Manual/semi-auto (RMSA) Automatic (RA) Automatic (RA) 270 270 Series 400 end plates come with a patented system with a rotary sliding end joint to allow the unit to be adapted to the pipe cutting distance (see page 3.1/03). The maximum inlet pressure for the version with RA automatic condensate drainage must not exceed 10 bar.

COMPONENTS 햲 Aluminium body 햳 Aluminium end plate 햴 OT58 brass retaining ring 햵 OT58 threaded bush, axial adjustment 햶 Technopolymer centrifuge 햷 Aluminium bowl 햸 Sintered bronze filter cartridge 햹 Aluminium screen 햺 Clear technopolymer glass 햻 Technopolymer plug 햽 Drain (RMSA) 햾 NBR gaskets

2 3 1 4 5 6 7 8 9 10 11

3.1/08

12

FLOW CHARTS FIL 400 1’’

• Flow tests carried out at the Department of Mechanics, Turin Polytechnic, using the computerized test bench following CETOP RP50R recommendations (ISO DIS 6358-2-approved) with ISO 5167 diaphragm gauge. (A) = 2 bar - 0,2 MPa - 29 psi (D) = 8 bar - 0,8 MPa - 116 psi (B) = 4 bar - 0,4 MPa - 58 psi (E) = 10 bar - 1 MPa - 145 psi (C) = 6 bar - 0,6 MPa - 87 psi

FIL 400 2’’

3

DIMENSIONS A E H

F

L

Threaded port A B C D E F G H I L M

FIL 400

FIL 400

FIL 400

G 1’’

G 1’’1/4 225÷255

G 1’’1/2

G 2’’ 283÷313

320 116 105 141.4 80 G 1’’

G 1’’1/4

G 1’’1/2 105.4 52.5 M6 hole 378

G 2’’

M

B

D

I

C G

FIL 400

3.1/09

KEY TO CODES FIL FILTER ELEMENT FIL.

100 SIZE 100 200

300

400

1/4 THREADED PORT

20␮m DEGREE OF FILTRATION

RMSA

1/4 3/8 1/4 3/8 1/2 1/2 3/4 1 1 1 1/4 1 1/2 2

5 ␮m 20 ␮m 50 ␮m

RMSA SAC RMSA SAC RA* RMSA RA

TYPE OF DRAIN

RMSA: Manual/semi-auto drain SAC: Automatic drain for sizes 100 and 200. Operates by depression – requires variable air take-offs. RA: Drain for size 300 and 400. Floattype operation irrespective of the pressure and flow rate. *

For SK200 with RA, please contact our sales assistance department

ORDERING CODES Code Description SKILLAIR 100 FILTER 3280001A FIL 100 5 RMSA WITHOUT END PLATES 3280007A FIL 100 5 SAC WITHOUT END PLATES 3280002A FIL 100 20 RMSA WITHOUT END PLATES 3280008A FIL 100 20 SAC WITHOUT END PLATES 3280003A FIL 100 50 RMSA WITHOUT END PLATES 3280009A FIL 100 50 SAC WITHOUT END PLATES 3280001 FIL 100 1/4 5 RMSA 3280007 FIL 1001/4 5 SAC 3280002 FIL 100 1/4 20 RMSA 3280008 FIL 100 1/4 20 SAC 3280003 FIL 100 1/4 50 RMSA 3280009 FIL 100 1/4 50 SAC 3380001 FIL 100 3/8 5 RMSA 3380007 FIL 100 3/8 5 SAC 3380002 FIL 100 3/8 20 RMSA 3380008 FIL 100 3/8 20 SAC 3380003 FIL 100 3/8 50 RMSA 3380009 FIL 100 3/8 50 SAC SKILLAIR 200 FILTER 3480001A FIL 200 5 RMSA WITHOUT END PLATES 3480007A FIL 200 5 SAC WITHOUT END PLATES 3480002A FIL 200 20 RMSA WITHOUT END PLATES 3480008A FIL 200 20 SAC WITHOUT END PLATES 3480003A FIL 200 50 RMSA WITHOUT END PLATES 3480009A FIL 200 50 SAC WITHOUT END PLATES 3480001 FIL 200 1/4 5 RMSA 3480007 FIL 200 1/4 5 SAC 3480002 FIL 200 1/4 20 RMSA 3480008 FIL 200 1/4 20 SAC 3480003 FIL 200 1/4 50 RMSA 3480009 FIL 200 1/4 50 SAC 3580001 FIL 200 3/8 5 RMSA 3580007 FIL 200 3/8 5 SAC 3580002 FIL 200 3/8 20 RMSA 3580008 FIL 200 3/8 20 SAC 3580003 FIL 200 3/8 50 RMSA 3580009 FIL 200 3/8 50 SAC 3680001 FIL 200 1/2 5 RMSA 3680007 FIL 200 1/2 5 SAC 3680002 FIL 200 1/2 20 RMSA 3680008 FIL 200 1/2 20 SAC 3680003 FIL 200 1/2 50 RMSA 3680009 FIL 200 1/2 50 SAC

3.1/10

Code Description SKILLAIR 300 FILTER 4480001A FIL 300 5 RMSA WITHOUT END PLATES 4480002A FIL 300 20 RMSA WITHOUT END PLATES 4480003A FIL 300 50 RMSA WITHOUT END PLATES 4480004A FIL 300 5 RA WITHOUT END PLATES 4480005A FIL 300 20 RA WITHOUT END PLATES 4480006A FIL 300 50 RA WITHOUT END PLATES 4480001 FIL 300 1/2 5 RMSA 4480002 FIL 300 1/2 20 RMSA 4480003 FIL 300 1/2 50 RMSA 4480004 FIL 300 1/2 5 RA 4480005 FIL 300 1/2 20 RA 4480006 FIL 300 1/2 50 RA 4580001 FIL 300 3/4 5 RMSA 4580002 FIL 300 3/4 20 RMSA 4580003 FIL 300 3/4 50 RMSA 4580004 FIL 300 3/4 5 RA 4580005 FIL 300 3/4 20 RA 4580006 FIL 300 3/4 50 RA 4680001 FIL 300 1 5 RMSA 4680002 FIL 300 1 20 RMSA 4680003 FIL 300 1 50 RMSA 4680004 FIL 300 1 5 RA 4680005 FIL 300 1 20 RA 4680006 FIL 300 1 50 RA

Code Description SKILLAIR 400 FILTER 6180001A FIL 400 5 RMSA WITHOUT END PLATES 6180002A FIL 400 20 RMSA WITHOUT END PLATES 6180003A FIL 400 50 RMSA WITHOUT END PLATES 6180004A FIL 400 5 RA WITHOUT END PLATES 6180005A FIL 400 20 RA WITHOUT END PLATES 6180006A FIL 400 50 RA WITHOUT END PLATES 6180001 FIL 400 1 5 RMSA 6180002 FIL 400 1 20 RMSA 6180003 FIL 400 1 50 RMSA 6180004 FIL 400 1 5 RA 6180005 FIL 400 1 20 RA 6180006 FIL 400 1 50 RA 6280001 FIL 400 1 1/4 5 RMSA 6280002 FIL 400 1 1/4 20 RMSA 6280003 FIL 400 1 1/4 50 RMSA 6280004 FIL 400 1 1/4 5 RA 6280005 FIL 400 1 1/4 20 RA 6280006 FIL 400 1 1/4 50 RA 6380001 FIL 400 1 1/2 5 RMSA 6380002 FIL 400 1 1/2 20 RMSA 6380003 FIL 400 1 1/2 50 RMSA 6380004 FIL 400 1 1/2 5 RA 6380005 FIL 400 1 1/2 20 RA 6380006 FIL 400 1 1/2 50 RA 6480001 FIL 400 2 5 RMSA 6480002 FIL 400 2 20 RMSA 6480003 FIL 400 2 50 RMSA 6480004 FIL 400 2 5 RA 6480005 FIL 400 2 20 RA 6480006 FIL 400 2 50 RA