Digital Image Correlation

Digital Image Correlation for Deformation measurement Introduction Digital Image Correlation is a full-field image analysis method, based on grey value...

0 downloads 201 Views 263KB Size
digital image correlation, how sensors work

http://www.sensorland.com/HowPage094.html

Digital Image Correlation for Deformation measurement

Introduction Digital Image Correlation is a full-field image analysis method, based on grey value digital images, that can determine the contour and the displacements of an object under load in three dimensions. Due to rapid new developments in high resolution digital cameras for static as well as dynamic applications, and computer technology, the applications for this measurement method has broadened and Digital Image Correlation techniques have proven to be a flexible and useful tool for deformation analysis. The dynamic range is wide, with the capability to measure large strains (>100%). The resolution depends on the field of view and is therefore scalable.

This Space available Place your message in this high profile LINK box. Email for details... [email protected]

Temperature Calibration www.flukecal.com

Features

Fluke® Provides a Wide Range of Temperature Calibrators Get a Quote

Material testing (Young's Modulus, Poisson's Ratio, Elasto-Plastic Behaviour)

Application Visibility www.ipanematech.com

Fracture mechanics High Speed applications (Dynamic measurements) Advanced materials (CFRP, wood, fibre injected PE, metal foam, rubber etc.) Component testing (Displacements, Strains etc.)

Have full visibility over network usage & performance

Agoda's Best Hotel Offers Agoda.com/Hotels Save up to 75% Instant confirmation Search hotels!

Measurement area: Flexible - mm2 up to m2 Measurement results: Surface contour, 3D displacement and strains Measuring sensitivity: down to 1/100,000 of the field of view

BPMN 2.0 Diagrammer visual-paradigm.com/BPMN Design Process with BPMN 2.0 Write Operating Procedure. Try Now.

Ultrasonic Sensor www.Maxbotix.com The MaxSonar Range Finder Line has Serial, Analog, PW & Easy to Use!

1 sur 4

22/01/2013 15:43

digital image correlation, how sensors work

http://www.sensorland.com/HowPage094.html

Heat sensor www.shockwatch.com

Identify gaps in your cold chain with low cost single use indicator.

GEA www.sequoia.it

New solution for Ground and Building Vibration

Electric Valve Actuators www.hanbayinc.com Automates most valves types. High accuracy positioning. Compact.

Ndt inspection www.ndt-welding-inspecti… Inspection contrôle non destructif Free Lance 7/7 dans le monde

PRINCIPLES Using a stereoscopic sensor setup each object point is focused on a specific pixel in the image plane of the respective sensor. Knowing the imaging parameter for each sensor (intrinsic parameter) and the orientation of the sensors with respect to each other (extrinsic parameter), the position of each object point in three dimensions can be calculated.

Squirrel Data Logger www.wessexpower.co.uk multi channel portable data logger Wi-Fi, Ethernet, GSM,

Using a stochastic intensity pattern on the object surface, the position of each object point in the two images can be identified by applying a correlation algorithm.

Correlation The correlation algorithm is based on the tracking of the grey value pattern G(x,y) in small local neighbourhood facets. Due to a loading of the object this pattern is transformed into where and

Within the correlation algorithm the difference of these patterns is minimized. By varying the illumination parameters (

2 sur 4

)

22/01/2013 15:43

digital image correlation, how sensors work

http://www.sensorland.com/HowPage094.html

and the parameters of the affine transformation ( ), a matching accuracy of better than 0.01 pixel can be achieved.

Calibration The quality of the measurement relies on exact know-ledge of the intrinsic and extrinsic parameters of the system. The calibration is easily done by taking images of a calibration panel under different perspective views. A bundle-adjustment algorithm calculates the in-trinsic parameter (focal length, principal point, distortion parameter) for each camera and their respective orientation, as well as the extrinsic parameter (translation vector and rotation matrix). Contour measurement An object point will be identified in the images of the two cameras by applying the correlation algorithm and finding homologous points. Taking the imaging parameters into account the contour of the object can be calculated. Deformation measurement Calculating the transformation parameters for images under different loading conditions, both the displacement vector and deformation for each facet can be deter-mined. Strain calculation Considering the curvature of the object, the strain can be calculated by the parameter of the affine transformation and by the gradients of the deformation.

APPLICATIONS Digital Image Correlation offers characterization of material parameters far into the range of plastic deformation. Its powerful data analysis tools allow the determination of the location and amplitude of maximum strain, which are important functions in material testing. Digital Image Correlation is also ideal for fracture mechanics investigation. The full-field measurement delivers exact information about local and global strain distribution, crack growth, and can be used for the determination of important fracture mechanics parameters. The software offers convenient data handling, reliable evaluation and extensive post-processing and analysis capabilities (e.g. determination and visualisation of principal strain). Material properties Live image (left), maximum principal strain (middle), principal strain (right).

3 sur 4

22/01/2013 15:43

digital image correlation, how sensors work

http://www.sensorland.com/HowPage094.html

Fracture mechanics Crack growth. Live image (left) and principal strain (right).

Component test Deformation analysis on a CFRP (carbon fibre reinforced plastics) structure. Live image (left) and out-of-plane deformation (right).

This article has been kindly supplied by :

Dantec Dynamics Turnkey systems and measurement services for the optical measurement of strain, deformation and vibration with all results giving Full Field - 3D - Non Contact results. Telephone: +44(0)1275 375333 Fax: +44(0)1275375336 Email: [email protected] Website: www.dantecdynamics.com

May 2009

Home - Website - Search - Suppliers - Links - New Products - Catalogues - Magazines Problem Page - Applications - How they work - Tech Tips - Training - Events - Jobs - Register

4 sur 4

22/01/2013 15:43