DOUBLE FERRULE COMPRESSION FITTINGS 2 GENERAL INFORMATION BULK manufactures high quality compression and pipe fittings in various materials for any application requiring
- the products show no visible defects as a result of transport. Consult the producer's processing guidelines for the proper storage and transport methods. Check whether this certificate is still valid by consulting Kiwa Nederland B.V. or the Kiwa we
Waverley brownall Ltd 46, The Vintners, Temple Farm Industrial Estate Southend-on-Sea, Essex SS2 5RZ Tel: +44 (0)1702 600014 ... Only forgings in the ... Stainless steel tube should be fully annealed and conform to ASTM A269 or equivalent
All of Team Lymed has left their mark on your garment! ... Multiple sources indicate that pressure treatment supports healing by removing excess fluids from the area and ... Lymed is also not responsible for the direct or indirect loss caused by the
PN 16 for non-potable water NORMA® Compression fittings are made of polypropylene for high-andlow density polyethylene tubing, diameters 16 to 110. Maximum service pressure: PN 16 bar from diameter 16 to diameter 63 – PN 12.5 bar from diameter 75 to diameter 110. DOES NOT INCLUDE hot water application. NORMA products are made in factories certified under ISO 9001 Version 2008. NORMA® fittings are tested and approved according to these standards: ISO 14236 (Czech Republic). ITC (Poland): BS Standard 5114, AS / NZ 4129, AS 4020. These products are not certified as compliant with international sanitary regulations for transport of potable water and liquid foods.
Advantages at a glance
• • • • • • •
• Watering: Residential, municipal, sport fields, golf courses. • Irrigation: Agriculture, horticulture, vineyards. • Industry: Compressed air.
Safe and durable Fast and easily connected Perfect water tightness Locking nut for a clinching system Simple insertion of the tube in the fitting No special worforce required High resistance to temperature and ultraviolet shocks