H1 High Performance Food Grade Gear Lubricant Product Data Sheet ANDEROL 6220 is a ... ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21
GENERAL INFORMATION ANDEROL 3032 is an ISO 32 compressor lubricant formulated from synthetic base fluid utilizing synthetic hydrocarbon (PAO) with specially developed additive systems. ANDEROL 3032 is registered H-2 for use in food processing plant a
ANDEROL PQAA-150 is a white oil based H1 registered lubricant, ... ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR
ANDEROL 3068 Synthetic Compressor Lubricant Product Data Sheet
ANDEROL synthetic lubricants are the only long-life synthetic lubricant with over 60 years of successful performance.
ANDEROL 3068 is an ISO 68 compressor lubricant based on synthetic esters and synthetic hydrocarbon (PAO) with a specially developed additive system providing excellent oxidative and thermal stability Anderol 3068 is rated H2 for use in food processing plant applications. Anderol 3000 range is available in the grades ISO VG 32, 46, 57, 68, 100 and 150.
• • • • • •
Lubrication of oil flooded screw and vane compressors, or any other application requiring an oxidation resistant lubricant Anderol 3068 can be used in the presence of following gasses
Fewer oil changes Increases maintenance intervals Separates water condensate rapidly Lower oil consumption Eliminates lacquering and deposits Reduces energy consumption
The following seals, paints and plastics are recommended for use in contact with Anderol Company Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials see our ‘Compatibility Guide’. RECOMMENDED : Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT
• • • • • • • •
• • • •
Air Butadiene Carbon Monoxide Furnace (crack) gas Carbon Dioxide (dry) Ethylene Helium Hydrogen
Cincinnati Milacron Tanabe ABAC ALUP
NOT RECOMMENDED: Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystrene, PVC, ABS
PROPERTIES Appearance @ 20°C Viscosity @ 40°C, cSt Viscosity @ 100°C, cSt Viscosity Index Density @ 15°C, kg/l Total Acid Number, mg KOH/g Flash Point, °C Pour Point, °C Demulsibility @ 54°C,min